Jump to content
SAU Community

Cleaning R33 Headlights

TUFF_350

By TUFF_350,
in South Australia

 Share

Recommended Posts

TUFF_350 Proficient

TUFF_350

Posted
Posted

Hey guys,

ive tried researching this & have searched various threads also. My R33 has quite hazy headlights which can be riden with various products such as Mother's Plastic Polish etc. Wat im wanting to do is remove the scratches on the lights, im wondering if anyone has used these novus products to do so?

http://cgi.ebay.com.au/NOVUS-Plastic-Polis...1QQcmdZViewItem

First two products seem theyd work a treat but i dont know about the third, mayb a lil too abrasive. I dun want to ruin my headlights cos a new pair wuld cost a bundle...thanx in advance! :D

Link to comment
Share on other sites
Hotwire Veteran

Hotwire

Posted
Posted

Personally, I just used some extra cut cream polish (for paint) and they came up pretty good. No need for these "plastic specific" polishes, all the same stuff i reckon, just re-packaged to jack up the price.

Link to comment
Share on other sites
harvesteros Enthusiast

harvesteros

Posted
Posted
Personally, I just used some extra cut cream polish (for paint) and they came up pretty good. No need for these "plastic specific" polishes, all the same stuff i reckon, just re-packaged to jack up the price.

I agree. Mine were really bad when I got the car, my mechanic said to hit it with some 1200 wet/ dry, then cut and polish. They are as clear as glass now, looks so much better. I usually cut and polish them every few months as they start to go a bit cloudy again.

Link to comment
Share on other sites
typevu Grand Master

typevu

Posted
Posted

I've cut and polished mine - looks alot better than when the car first arrived... but it still has some yuckiness to it - it look as though its on the inside of the headlight... should I keep going with the cut and polish?

Link to comment
Share on other sites
harvesteros Enthusiast

harvesteros

Posted
Posted
I've cut and polished mine - looks alot better than when the car first arrived... but it still has some yuckiness to it - it look as though its on the inside of the headlight... should I keep going with the cut and polish?

I'd say yes. I did mine about 10 times to start with, each time getting better and better until it was perfectly clear. When they are wet do they look good? Usually they do and that suggests that everything is on the outside. Might I add they didnt look too bad when I saw your car at Auto Perfection the other day, nice car. They didnt put a sticker on my car, did you get one?

Link to comment
Share on other sites
typevu Grand Master

typevu

Posted
Posted
I'd say yes. I did mine about 10 times to start with, each time getting better and better until it was perfectly clear. When they are wet do they look good? Usually they do and that suggests that everything is on the outside. Might I add they didnt look too bad when I saw your car at Auto Perfection the other day, nice car. They didnt put a sticker on my car, did you get one?

Not sure on the wet thing but probably take a look at it again later - can definitely see the yuckness in the sun.

And yeah I got a small sticker just underneath the rear windscreen wiper.

Link to comment
Share on other sites
SLED Grand Master

SLED

Posted
Posted

Hey all.....is it just the 33's that suffer from this or do the 32's & 34's have the same problem.....mine seem pretty clear.

I suppose it's a combination of fall out and UV that causes the problem?

Link to comment
Share on other sites
KISIN Veteran

KISIN

Posted
Posted
Hey all.....is it just the 33's that suffer from this or do the 32's & 34's have the same problem.....mine seem pretty clear.

I suppose it's a combination of fall out and UV that causes the problem?

They all do. My old 34 suffered as well, and fixed it with some plastic polish (and lots of scrubbing).

Link to comment
Share on other sites
SLED Grand Master

SLED

Posted
Posted
use Autosol metal polish. they come out fkn crystal clear!

Yeah I use something similar on the bike's stainless steel just before a show and you can't tell if it's stainless or chrome.

'Liquid Reflection' metal polish.

Link to comment
Share on other sites
Sambo33 Grand Master

Sambo33

Posted
Posted
Il be giving that a go soon but any idea how to take the clear cover of the light so i change the chrome to black?

u gotta heat the plastic up and pry the cover off with a screwdriver, its sealed on with urethane :)

Damn those headlights were filthy!

thats actually what the lights look like after sanding them :(

the pic quality wasnt too good cos i used my phone cam

Link to comment
Share on other sites
SLY R33 Rising Star

SLY R33

Posted
Posted

all we do at work when we get 2nd hand headlights and they are like that is just get cut n polish and scrub away and they look like new! we just use the normal cut n polish you use on the car paint. works fine

Link to comment
Share on other sites
pixel8r Mentor

pixel8r

Posted
Posted

Before trying any expensive polish, try getting a rag/cloth and rubbing toothpaste onto the headlights. Its not perfect but I've found it does give quite good results. Just make sure not to get any on the paint!! This goes for any cut and polish as well. Normal polish is ok on paint but cut and polish will normally wreck your metallic/pearl paint.

Pretty sure all skylines have this problem with faded headlights. Stageas are the same too. :)

Link to comment
Share on other sites
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Rear suspension upgrades

      By Duncan · Posted

      I think the pic in the first post is another car, and post 7 is OP's car with standard arms and swaybar swaybar swaybar. I can't tell what brand the silver coilovers are, and even if I could I don't know whether the spring rate is OK, if you can find a brand on the shocks and numbers on the springs that might help. Also, if you can measure the ride height from centre of your wheel to the guard that will help with advice too as handling suffers if ride height is too low
    • Duncan
      Manual Shifter slightly bounces/moves/vibrates when accelerating/deaccelerating

      By Duncan · Posted

      sadly, pics no work. that car must have spent a lot of time in a cryo bubble
    • Murray_Calavera
      Rear suspension upgrades

      By Murray_Calavera · Posted

      In the first photo you posted, the colour of the control arms are the signature colour for Ikeya. Same for the swaybar, signature colour for Whiteline.  I like Hardrace, they also do hardened rubber bushes if your car is mainly a street car.  I like GKTech as well, but they use a lot of rose joints in their stuff so might not be the best choice for everyone.  The system might have been good back in its day, but it's a prehistoric system now. I suspect that most people have removed the HICAS as they want the car to do what they want to do, not what the car wants to do. From what I also understand, it isn't consistent in it's behaviour on track so it's hard to trust the car/know where its absolute limits are for track use.  Having said that, I think the HICAS eliminator kit was the first thing I installed when I bought my car. I don't personally have any experience with the HICAS system on a race track.  
    • Sleepergm
      Rear suspension upgrades

      By Sleepergm · Posted

      Thanks for the info. Didn’t know I had aftermarket control arms already? Will talk to my garage. What brand would u recommend if I want to play around with my camber more? I would think my camber is around stock level right now or more negative now due to lowering with coilovers. I will be lower her again 1.5 cm to get some more.    also why does everyone like to remove the hicas system? Is it because most don’t work properly anymore or ppl just don’t like them. Mine is functioning as it should be right now.    thanks for the good info 
    • Murray_Calavera
      Rear suspension upgrades

      By Murray_Calavera · Posted

      It looks like you've got Ikeya control arms and an aftermarket sway bar, maybe whiteline?  Or am I just going crazy? lol Unfortunately it won't, but what it will do is look really pretty. That's about all unfortunately.  How much neg camber do you currently have? Generally lowing the car dials in quite a bit of neg camber as it is. If you do go down this path, your best bet is get adjustable arms, toe arms (or preferably a good HICAS elimination kit) and traction rods. With all 3 being adjustable, you'll be able to dial out any bump steer that is introduced by playing with the camber settings. 
×
×
  • Create New...