Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Toshi

Recommended Posts

  • 4 weeks later...

Hi PWND

I sent PM.

bahanthich

I have not installed daughterboard to ECU.

Daughterboard cost is $700.

So I use H8 plcc.

This costs is $80 (can not erase)

I will make data on daughterboard ECU(real time tune) then burn data onto H8 chip.

If I install daughterboard to ECU and tune , road tune would cost $1050.

If I install H8 chip, First and second remap is same price.

If you install daughterboard $80 discount for the second remap.

Thank you

how much for a second remap? eg get a first remap, then bigger turbo/injectors/afm upgrade, and need a second remap but already have the daughterboard installed?
Link to comment
Share on other sites

Hi PWND

I sent PM.

bahanthich

I have not installed daughterboard to ECU.

Daughterboard cost is $700.

So I use H8 plcc.

This only costs $80 (can not erase)

I will make data on daughterboard ECU(real time tune) then burn data onto H8 chip.

If I install daughterboard to ECU and tune , road tune would cost $1000.

If I install H8 chip, First and second remap is same price.

If you install daughterboard $80 discount for the second remap.

Thank you

Link to comment
Share on other sites

hi toshi

can you do R34 GTT ecu remapping? I currently have only a turbo back exhaust .. but I want to get a boost controller and put the boost up to 11 and then have the ecu remapped so as to get a good/safe afr etc

What's the cost? Would a SAFC2 be a better option than a remap?

Link to comment
Share on other sites

Hi Delta Force

Are you Sydney?

hi toshi

can you do R34 GTT ecu remapping? I currently have only a turbo back exhaust .. but I want to get a boost controller and put the boost up to 11 and then have the ecu remapped so as to get a good/safe afr etc

What's the cost? Would a SAFC2 be a better option than a remap?

Link to comment
Share on other sites

  • 2 weeks later...

hey toshi,

im interested in a tune on a r32 gtr, only has cat back, air pods, and a bleed valve, seems to run 8psi as stanadard, guess will raise to 12-14psi, what sort of torque and power levels would that give. if battery is removed from car is tune erased or damaged, where in sydney are u?

thanks mate

Link to comment
Share on other sites

Hi benr32gtr

I sent PM.

Hi esky mad

I think also you need change air valve.

see you soon.

had my RB20 cefiro remapped by toshi, very happy with how much better the car drives. comes on boost much faster, was tuned with a safe tune because the car is primarily a track car.

for the price its defnitely worth it!!

see you soon toshi, with Z32 and Injectors!!

Link to comment
Share on other sites




  • Latest Posts

    • Never cheap out on brakes, tyres, suspension. I learnt the hard way at Oran Park lol
    • You got your answer when everything was OK after disconnecting your return line from the FPR. Why in the world are you running a 460, 2200CC injectors, etc. on stock 8mm lines?  Keep the pump, ditch the lines. I used both 8mm lines as my feed and one of my Hicas 10mm lines as return. 
    • Also to note, in the Subaru world, Whiteline endlinks have been reported to break... often. So going Hardrace or GKTech would be my option.
    • Hi all. I had to chamge fuel pump due to car sitting for 10.years and went the 460. From memory it had the slightly smaller walbro in it previously. Running bosch 2200 injectors and a turbosmart compact fpr. Problem is no2 I can't get base pressure below 70psi. If I disconnect return line from fpr pressure drops indication restriction. I've inspected.the fuel line and removed the pipe on return line in tank and no chamge. Surely I'm not the only o e using stockings on a 460? Could the fpr be too small to handle the flow of new pump ? I'd like to sort it rather than going back.to smaller pump.
×
×
  • Create New...