Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Toshi

Recommended Posts

DYNO CANNOT BE DONE ON SUNDAY- ROAD TUNE ONLY

NISTUNE , Power Fc ,HKS FCON , Haltech, EMS, link stc all nissan R32 R33(R33 ECU) R34 Stagea Silvia 300ZX etc daughter board REMAP ECU road tune and dyno tune available in Sydney.


NISTUNE PRICE (using nistune software and nistune board)




NISTUNE%20BOARD.GIF



R32 Z32 $1000 R34 stagea silvia $1000 R33 $1250 include modify Z32 ecu

to include nistune board and fitting nistune board also road tune and dyno tune.





real time REMAP tune PRICE (using nistune software and chip)
Please read how to tune R33 ecu.

R33.board.pc.JPG


http://www.skylinesa...__fromsearch__1


R33 $900

to include install and fitting chip and socket (ECU exchange) with road tune and dyno tune.

Real time remap Road tune only.(include modify ECU and chip or daughter board.Not nistune board)

R32,Z32from $820
R33 from $900




REMAP AND NISTUNE is same performance.(both NISSAN factory ECU tune)

This price is basic tune only.
Full tune engine is extra.




How to tune on road

I will fit wideband air fuel ratio meter(same dyno machine O2 sensor), and lap top computer, Gizzmo KMon Knock Monitor & Analysisor,before we leave the house.


clampo2smoll.JPGKmonsmoll.JPGnistunesmoll2.JPG


While the customer is driving,I will sit in the passenger with my laptop.
Start with 2nd gear, winding up from 2000rpm-5000rpm to check car condition and datalog.
I will make fuel and timing map then 2nd gear again to check air fuel ratio and engine knock.
After making rough map on 2nd gear we will go to small mountain then tune for engine response and power feel.
I will drive my self then make responsive map.
Next we will go to freeway .With 3rd/4th gear, we will be running on freeway from 2000rpm-3000rpm to check engine response and engine knock.
Then next 3000rpm-4000rpm ,this will be repeated in increments of 1000rpm.If we find flat spot , slow response , laggy,engine knock etc I will fix and tune on freeway.
After that is done, we will go to dyno shop. I will tune fuel and timing map on dyno.

Take all day.





DYNO POWER



Walbro 255l/hr Fuel Pump
3 inch turbo back exhaust
Air Pod
FMIC

208kw at 12-13psi
R33208kwL.JPG



Walbro 255l/hr Fuel Pump
3 inch turbo back exhaust
Air Pod

FMIC

R33GTS-T STD turbo 196kw at 11psi and 207kw at 12psi AFR12
siddr20%20R33%20gif.gifR33207kw.JPG



R34 RB25Neo
V-Power 98
16psi
GCG hi flow turbo
Standard internals
3in exhaust + dump
stainless turbo manifold
Apexi front mount Delta type
Z32 air flow meter
Splitfire coils NGK plugs
STD injectors
Walbro fuel pump

GCG hiflow turbo 277Kw

R34GCG277kw.JPG



RB25DET
18psi
GCG turbo
RB25 Standard internals
Front mount inter cooler
Z32 air flow meter
Fuel pump

GCG hiflow turbo 269kw

S13RB25Sss.JPG


R33 S2
Unopened RB25 ~100,000km
Hypergear PU Highflow (non SS1)
Blitz return flow FMIC
Splitfire Coils
Metal intake with std airbox
Z32 AFM
S15 480cc injectors
Gizzmo Boost controller
Xtreme Cushion button clutch

287kw at 19psi


R33.gcg.287kw.JPG



-3" turbo back exhaust
-Hypergear Hiflow 21U housing (R33 turbo hiflow)
-Z32 afm
-Pod filter
-Stock injectors
-Frount mount intercooler
-wolbro fuel pump

263rwkw at 15psi

R33.21U.260kw1.JPG


1) Road tune labor from $600

2) DYNO tune labor from $600

3) ROAD TUNE and DYNO TUNE labor Price from $700

4) Power FC tune road tune plus dyno tune from $700

Im using FC datalogit (tune by laptop pc)



The difference between dyno tune and TOSHI's dyno tune and road tune.

Its very hard to explain but my customer up load to 300zx forum.
300zx customer has quite tactfully summarised what I take pride in when I tune.

Let me quote from his first hand experience
"Funnily enough my mate just bought a 2 seater and has 270 rwkw, got the sheet to prove it and mine has 250 mine feels like it pulls harder from the toshi tune than his and the curve is smoother I can tell you that the mid range in mine is light years apart from his and both have the same mods, maybe his might make a bit more up top but mine feels shitloads quicker and better to drive especially when pulling out of corners."

Basically, importance is placed on practicality. I believe in real power rather than mere numbers.


mail order custom remap ecu for other state

http://www.skylinesa...a/#entry4970847

FACE BOOK
http://www.facebook.com/toshi.tune.3

Ph 0410490049
e-mail <script cf-hash='f9e31' type="text/javascript"> /* */</script>

If you are not happy with the performance, I will not charge.

Link to comment
Share on other sites

Once the remap is done onto your stock ecu and say further down the track you dont like it, can you just take that chip out?

or you have to buy another 33 ecu?

Im very interested in this.

Dyno tune that is. Not to sure if road testing will be what i want, as theres too many factors involved.

Also do you have your own dyno? So it only takes 1 hour?

With this remap done on the dyno, are you able to see if the car is lean or rich and can you adjust these ratios?

Where you located?

Thanks

Edited by siddr20
Link to comment
Share on other sites

siddr20 thank you for calling.

I sent PM.

merlin6014

I sent PM

Once the remap is done onto your stock ecu and say further down the track you dont like it, can you just take that chip out?

or you have to buy another 33 ecu?

Im very interested in this.

Dyno tune that is. Not to sure if road testing will be what i want, as theres too many factors involved.

Also do you have your own dyno? So it only takes 1 hour?

With this remap done on the dyno, are you able to see if the car is lean or rich and can you adjust these ratios?

Where you located?

Thanks

Link to comment
Share on other sites

Hey Yoshi

I am in Adelaide, with a series 1 automatic 1997 Nissan Stagea awd, with highflow turbo

How could we go about tuning my Stagea using your custom remap chip? I have a fair few mods, with more to go on the car when it is tuned (new 550cc injectors in box, splitfire coilpacks, heavy duty actuator for the highflow turbo, etc).... also using a safc and sitc and z32afm at the moment for a 180kw tune

Was going to go to Jeff at The SpeedLabs, as he does the r33 remap for around $1300 on a dyno I think, but want to hear what you may be able to offer.

edit: can you pm me yoshi with your available options? I generally dont visit this area........

Link to comment
Share on other sites

Hi Tangles

My name is toshi

Please tell me how big hi flow turbo.

I be able to HKS GT2530 or 2540.

I think you do not need injector.

Because up to 350 hp is 370cc injector ok.(normal injector is 370cc)

But you need GTR(200 l/min) or other bigger pump.(also Z32 AFM)

Hi subie

I will road tune (about 1-2 hours)after dyno.

So dyno is 1hours (normal turbo) .

Hi mate,

how long u usually take on the dyno for the dyno tuned?

Link to comment
Share on other sites

Hi Tangles

My name is toshi

Please tell me how big hi flow turbo.

I be able to HKS GT2530 or 2540.

I think you do not need injector.

Because up to 350 hp is 370cc injector ok.(normal injector is 370cc)

But you need GTR(200 l/min) or other bigger pump.(also Z32 AFM)

hi, Ive sent a PM

sorry for name mistake

I have the Slide highflow turbo (2530 equivelant), z32 afm, 040 bosch fuel pump, currently using a fuel pressure regulator, safc, sitc, etc, as covered in my Pm to you.

Seeing I have the injectors I will be using them.

cheers. Just not sure how to go about this seeing Im in adelaide

Link to comment
Share on other sites

Hey guys, just letting you know i met up with Toshi a few days ago and had my ecu remapped. Starting off i had idleing problems and within a very short amount of time he found the source of my problems :laugh: Afterwards he went to some tuning of my car, and what can i say - its running so much nicer now, very smooth power all through the rev range now, instead of flat spots here and there. I've noticed a nice increase in power, and im not chewing through as much petrol as i used to.

I'm only running FMIC, BOV and 3" catback exhaust, however in the next couple of weeks, i will be upgrading the turbo, boost controller etc and will be heading straight back to Toshi for another retune. Thanks for the remap! I recommend him!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...