Jump to content
SAU Community

N/a+t Power Results - N/a +t Turbo Conversions Only


N-DAWG
 Share

Recommended Posts

Here's my situation I've got my 32 witch has been t-boned has rb20det ( 264s, gtx3071 with r33 rear, power fc and all the mods to suit) 252kw (no torque )

I've also got a laurel with a rb25 de. I'm unsure if its worth putting all my parts from my rb20 stuff into the rb25de.

Any advice or help would be much appreciated

Link to comment
Share on other sites

  • 1 month later...
  • 3 months later...

Model - A31 cefiro

Engine - RB25DE series 1

Modifications / Parts Used - completely stock un open or modified block and head. garet turbo stainless top mount manifould, sard 650cc injectors, hdi intercooler kit,38mm wastgate

Engine Management Used - Link G4 plug in

Fuel Used - 95 octane and E30 ethanole

Boost Used - 8psi on petrol and 12psi on E30

Dyno Tune Results - 290hp on petrol and 360hp on E30

Misc- when preforming a de+t you have a reasonably strong base engine package to begin with. but the one problem you will always face is detonation due to your compression ratio puls your trying to force feed it more air. to combat this I used ethanol blend witch burns far cooler there for lowering your risk of detonation and the ability to run more boost= more power! I have used and abused this engine package for 3 years now with no issues to the (still) stock standard engine package. to this day I still recommend people to use a plus T engine overr a standard turbo engine

Costs - Parts: $4,000 Labour: $0.00 Tuning: $2,000

post-134574-0-97995800-1399762944_thumb.jpg

  • Like 1
Link to comment
Share on other sites

  • 1 year later...

Hey guys im currently doing an RB25de NEO +T conversion for my R33 track car. I want to use a forward facing plenum but the intake ports on the head are smaller than the FFP ports. Anyone running a FFP on there RB25de NEO turbo engine? The plans are are a GT3076, ID2000 injectors, microtech, extenal gate on a modded 25det turbo manifold. I really dont want to use the factory 25DE inlet manifold.

Cheers guys

Link to comment
Share on other sites

has anyone had any issues fitting a standard RB25det turbo manifold onto an RB25de NEO? Looks as if i need to die grind the holes in the manifold where it bolts up to the studs. Have tried 2 different standard 25 turbo manifolds and same thing on both. Not a big problem, just wondering if anyone has had the same thing happen

Link to comment
Share on other sites

I have heard of people having that problem. It is due to all the heat cycles through the life of the motor and mani that make it slightly "deformed".

Have you tried lining it up with a a few/all the studs taken out?

Link to comment
Share on other sites

  • 2 weeks later...

Hey guys im currently doing an RB25de NEO +T conversion for my R33 track car. I want to use a forward facing plenum but the intake ports on the head are smaller than the FFP ports. Anyone running a FFP on there RB25de NEO turbo engine? The plans are are a GT3076, ID2000 injectors, microtech, extenal gate on a modded 25det turbo manifold. I really dont want to use the factory 25DE inlet manifold.

Cheers guys

wrong thread man...... now its all spammed up ...

booooooo

anyway ask questions here --> http://www.sau.com.au/forums/topic/33407-how-to-turbo-your-na/page-42

now someone make me into a mod....muhahaha SAU domination :verymad:

Link to comment
Share on other sites

  • 3 months later...
  • 2 months later...

MODEL: R32 gts

ENGINE: RB20DE

Mods/ parts: R32 gts ecu and injectors.

EBay intercooler kit. S1 rb25 turbo. Pod filter.

BOOST: 12PSI

FUEL: mostly 98 unleaded.

Standard 92 in country tassie when times are tough lot.

Power: don't know but beats modified V8 commodores and wrx's at powercruise.

Other notes: have now done 30,000kms thrashing the fu#k out of the old girl. Held back on posting a review for a couple of years because I don't want to give bad advice to people.

It's now been tested and all I can say is that a turbo setup on a Na with a standard turbo ecu with turbo injectors has the same reliability as a standard turbo engine.

Will try to get to a dyno soon.

cost: approx. $1000

(turbo,manifold, water and oil lines) $400

(ecu and injectors) $200

(exhaust downpipe, custom intake) $300

(other sh#t) $100

Link to comment
Share on other sites

  • 1 month later...
  • 3 years later...

Greetings friends.
I am new to the topic but I see that you master it very well. I have 2 rb20 one aspirated and another turbo, I would like to know if it would be better to invest the money to the aspirate to get more profit or simply mix them.

Anyway, I've been thinking about doing the rb20 of + t but I would like to hear your opinion and recommendations.

Thank you.

Link to comment
Share on other sites

6 minutes ago, Pedro_rosario said:

Greetings friends.
I am new to the topic but I see that you master it very well. I have 2 rb20 one aspirated and another turbo, I would like to know if it would be better to invest the money to the aspirate to get more profit or simply mix them.

Anyway, I've been thinking about doing the rb20 of + t but I would like to hear your opinion and recommendations.

Thank you.

Have you got two cars or just two engines? If the latter do up the turbo engine and drop it in. You will still need the ecu and loom and an intercooler of course.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




×
×
  • Create New...