Jump to content
SAU Community

This Is The New Recipe Chat Thread...


Houdini
 Share

Recommended Posts

I'll start this funky new thread :(

This is sort of true, as in I haven't exactly done it today as I pick it up in a couple of days, but it's good enough (and will show before and after).

New front Aero going on:

stageafront.jpg

Link to comment
Share on other sites

Nice choice. The factory Aero is definitely nicer than the standard RS "smile".

All you will need to do is pick up some black mesh from Autobarn (about $30), really finishes it off nicely.

Edited by iamhe77
Link to comment
Share on other sites

I hacked into the trans ecu and cut the yellow wire controlling the Tourque converter solenoid, placed a resistor across the ecu output to trick it into thinking there is a solenoid there and ran 12 volts straight to the TCC solenoid. Now I have a switch beside the shifter to lock up the tourque converter while driving. (just a temp solution as the trans ecu gives a gentle ramped voltage and I need a firm engagement.)

Im also putting a kit in the GTR callipers I have, definitely need those brakes done...

Nice choice on the bar, do you have the foggies to go in?

Link to comment
Share on other sites

i put an amp for the speakers in it . pity its on the passanger seat and not under it with wires and shit goin to it . also inquired about some alpine type r's for the front

Link to comment
Share on other sites

Nice choice. The factory Aero is definitely nicer than the standard RS "smile".

All you will need to do is pick up some black mesh from Autobarn (about $30), really finishes it off nicely.

agree, black mesh going in :D now i need the other aero bits or else a nice alternative rear and sides...

Link to comment
Share on other sites

Nice choice on the bar, do you have the foggies to go in?

I don't. I have been struggling to figure out what to put in. The factory one's are round but I've been toying with putting in square one's. The mount is quite square. There's also a nice (round) set of projectors one's I've seen and a light strip of LED's like on the audi's which might look good too. The spotties on one of the Lexus sedans look nice too, sort of oval shaped.

Can't decide dammit.

Link to comment
Share on other sites

The sides would make great air ducts or allow a long intercooler. The fog lights get in the way of the 3 inch cooler piping I put in too.

Audi style lights could look good. Might be too low there though.

Link to comment
Share on other sites

Fitted my 4 pots upfront with braided lines, Fitted my 3" downpipe and new track rod ends all on and tracked up.

Next, Move the bloody amps and wiring and secure them, I'm sick of them moving around when i go around corners.

Link to comment
Share on other sites

What Have You Done To Your Stagea Today?

Well today I think I finally shagged 2nd gear trying to get a decent stading 1/4 time.

So now looking for some uprated internals ( and a bank manager that understands nissans)

Link to comment
Share on other sites

What Have You Done To Your Stagea Today?

Well today I think I finally shagged 2nd gear trying to get a decent stading 1/4 time.

So now looking for some uprated internals ( and a bank manager that understands nissans)

6 speed r34 getrag with an ikeya formula shifter? :cheers:

mods on mine, 6" alpine type r coaxials for the rear doors (fronts already had some kind of focal splits in there), machined the rotors, jjr 40mm alloy core radiator to keep things cool

service coming up next week, Gulf Western S6000 Sougi Class 5 Fully Synthetic going in ;) (same spec as motul 300v chrono but only $68 for 5 litres) should be good, will be interested how it goes

Link to comment
Share on other sites

TODAY I replaced a dead coilpack

Superspark sent me a new one for the price of 'on the house' since old number 5 didnt want to play the game anymore.

Took it for a drive for the first time in a week and she's excellent

Link to comment
Share on other sites

Tring to buy a R32 GTR RB26 front cut, only probably is tring to find somewhere to store it for a month or 2 without the wife finding out!!!

Any idea's

Also bought some fancy brake fluid

i'll look after it for you :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • I think the pic in the first post is another car, and post 7 is OP's car with standard arms and swaybar swaybar swaybar. I can't tell what brand the silver coilovers are, and even if I could I don't know whether the spring rate is OK, if you can find a brand on the shocks and numbers on the springs that might help. Also, if you can measure the ride height from centre of your wheel to the guard that will help with advice too as handling suffers if ride height is too low
    • sadly, pics no work. that car must have spent a lot of time in a cryo bubble
    • In the first photo you posted, the colour of the control arms are the signature colour for Ikeya. Same for the swaybar, signature colour for Whiteline.  I like Hardrace, they also do hardened rubber bushes if your car is mainly a street car.  I like GKTech as well, but they use a lot of rose joints in their stuff so might not be the best choice for everyone.  The system might have been good back in its day, but it's a prehistoric system now. I suspect that most people have removed the HICAS as they want the car to do what they want to do, not what the car wants to do. From what I also understand, it isn't consistent in it's behaviour on track so it's hard to trust the car/know where its absolute limits are for track use.  Having said that, I think the HICAS eliminator kit was the first thing I installed when I bought my car. I don't personally have any experience with the HICAS system on a race track.  
    • Thanks for the info. Didn’t know I had aftermarket control arms already? Will talk to my garage. What brand would u recommend if I want to play around with my camber more? I would think my camber is around stock level right now or more negative now due to lowering with coilovers. I will be lower her again 1.5 cm to get some more.    also why does everyone like to remove the hicas system? Is it because most don’t work properly anymore or ppl just don’t like them. Mine is functioning as it should be right now.    thanks for the good info 
    • It looks like you've got Ikeya control arms and an aftermarket sway bar, maybe whiteline?  Or am I just going crazy? lol Unfortunately it won't, but what it will do is look really pretty. That's about all unfortunately.  How much neg camber do you currently have? Generally lowing the car dials in quite a bit of neg camber as it is. If you do go down this path, your best bet is get adjustable arms, toe arms (or preferably a good HICAS elimination kit) and traction rods. With all 3 being adjustable, you'll be able to dial out any bump steer that is introduced by playing with the camber settings. 
×
×
  • Create New...