Nm35 Stagea Front Chassis Brace

[conan7772]

[joshm35]

*driving around with my front underbody brace*

[conan7772]

[myothercarsa2cv]

I'll take one to the UK if possible? if it helps could combine postage with Mr Gazman?

[gazman2]

I'd be happy to do that!

[myothercarsa2cv]

Any news Daleo?

[conan7772]

Hey people,

The R33 GTS-T / GTR rear strut brace is a perfect item to fit M35 Stagea front chassis.

Remove the end brackets and throw out.

Remove both centre back nuts and throw out.

The tubes and centre bolt are a tad long so I cut 10mm off one tube section and 10mm off one end of the centre bolt.

775 centre to centre is the magic number.

I used 50mm x 12mm hex bolts to connect to the under carriage. Spares holes illustred by screw driver. No need to unbolt anything

You'll need to drill out the holes in the braces to 12mm, existing is 10mm

Done for $50 in 20 mins and strong as buggery.

[conan7772]

Tried fitting it two ways, over and under the brace.

Over is better, sits a bit low under.

Great front end stiffening.

Use a reamer to increase holes from 10mm to 12mm.

Plenty of these braces available all the time

I