Jump to content
SAU Community

Www.laprecords.com.au


BenCRX7
 Share

Recommended Posts

Hi,
I have built a laptime database web platform. Basically its the 'laptimes thread' but made into a dynamic website that no longer requires someone to update it. Simply, make an account, do a time then enter the details along with the natsoft or equivalent official link and it will be instantly represented (subject to my checking the link), allowing you to see your place.

I have featured every main Au racetrack (if you want a track added just let me know) and you are able to search laptimes based on track, car make and model, street rego or not etc.

hopefully this provides a quick and easy way to keep track of where you sit in the overall scheme of things.

laprecordsLogo.png

http://www.laprecords.com.au

Check it out, let me know if you see any problems/issues or have recommendations. Enter your times! Its free

Thanks.

Link to comment
Share on other sites

Nice work, great idea.

- I think it would look nicer if it was maybe 25% wider ?

- Should the same person be able to enter multiple lap times for the same car? I know some people that would have 100 laps that are faster than the current quickest for tracks that could flood the entire records.

Link to comment
Share on other sites

Nice work, great idea.

- I think it would look nicer if it was maybe 25% wider ?

- Should the same person be able to enter multiple lap times for the same car? I know some people that would have 100 laps that are faster than the current quickest for tracks that could flood the entire records.

Thanks. You can enter multiple times in the same car however if you're just filling up the leaderboard with 1:01.1, 1:01.2, 1:01.3 etc then i'll just remove them. Upload your best time and if you beat it and upload to the same track again, it will remove your previous time if it was in the same car. The idea is that each person is represented once per track, per car. If you have 2 cars then you have more money than me :)

Link to comment
Share on other sites

  • 2 weeks later...

Yeh mate, running on a NAS server in my house. Simple but seems to work ok. I'll migrate it to something more serious if it catches on.

A link in with natsoft is probably the way to go, but not sure where to start with that. Call it a long term goal. :)

Link to comment
Share on other sites

  • 2 years later...
  • 5 months later...
  • PranK unpinned this topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Yep sure does . Comes on primes and cuts off as a factory pump would 
    • And I hope the relay receives the trigger signal from the ECU and not the ignition power. It should prime and stop if the motor isn't running.
    • I disconnected before the fuel pump and restriction still there. Disconnected at turbosmart fpr and also after ethanol sensor and pressure dropped. No kinks in line but I found one spot above diff that I can hear the fuel flowing while running so I'm wondering if there is built up corrosion  from 10 years of sitting.  I had injectors cleaned and tested and one was dead but rest were fine. Was never an issue when I owned the car previously but I'll talk to jez about his thoughts on if they should be changed to newer tech. Thx guys at least I know the setup should work again. Pump is wired directly to relay and not using factory plug any  more 
    • Nice work on the shroud/ducting.  
    • Hi and best of luck with your car. Its a bit hard to tell how low the car is all round from that pic or if its been lowered or not. 90mm is a bit low on the front apron but it depends on the shocks & springs condition & whether or not its been lowered. Going to 19” wheels will give you 15-20mm depending on rubber but you might need new shocks. Mine -2005 are weeping fluid slightly but have lasted 19years!!. So if yours are original they need replacing anyway if they havent been touched before.
×
×
  • Create New...