Jump to content
SAU Community

Nissan Stagea Rs S2 Rwd - Whats What Thread


Tw1ch
 Share

Recommended Posts

I Thought i would start this to help all of us that own RWD Stageas...

It would be good to keep it only RWD so it can be an information source for people that need help with part and other bits

These are some things i know so far

I will edit as i go to fill in the gaps and if there's new info that would be great

Upgrades can be listed as well as stock part

Front Brakes: -Calipers = Unknown Upgrade:GTST r33

- Rotors = Unknown

Rear Brakes: -Calipers = Unknown

- Rotors = Unknown

Suspension: -Tension/caster rods: 300zx,R33, R34 (and many more i think)

-Tie rods and ends = S14,S15

-Other rods etc: Unknown

-Front Springs: Unknown

-Front Shocks: Unknown

-Back Springs: Unknown

-Back Shocks: Unknown

Gear box: -Auto: r34/s2stagea

Edited by Tw1ch
Link to comment
Share on other sites

Yeah, they are: Myles (GreenGhost) just bought and fitted a new set of HSD coilovers, and the fronts were the same as S14. Bonus for him was adjustable camber tops: My RSFour set didn't get them...

FYI: he also managed to get R34 GTT front calipers to fit with a little bit of fiddling.

Link to comment
Share on other sites

Bendix pads for stock system.
db1696 front

db1399 rear

and what rear suspension (ie coils or springs )??

Edited by Tw1ch
Link to comment
Share on other sites

Rear suspension is the same on both 4wd and RWD, as far as I am aware: Told Myles to get his lazy self back on the forums and give you as much info as he has: give it time - He'll get around to it.

Link to comment
Share on other sites

r33 front brakes and rotors will fit with a wahser/spacer to line then up

rear brakes r34 will fit straight up

rear shocks are the same as 4wd

fronts shocks are s14

gearbox is same as r34

ottomoto do coilovers for s2 rwd and are awesome

Link to comment
Share on other sites

  • 2 weeks later...

Another RS S2 owner signing in.

All I can add is that an RB30 will drop straight in with no drilling of mounts using stock manifold.

Cant fit the strut brace on without spacing it up, or perhaps a non traction control throttle body would give a little more clearance.

Link to comment
Share on other sites

Unless the 2wd has an entirely different suspension to the 4wd all he will be adjusting is the angle of the shocks - not the camber.

Yeah, they are: Myles (GreenGhost) just bought and fitted a new set of HSD coilovers, and the fronts were the same as S14. Bonus for him was adjustable camber tops: My RSFour set didn't get them...

FYI: he also managed to get R34 GTT front calipers to fit with a little bit of fiddling.

Link to comment
Share on other sites

Unless the 2wd has an entirely different suspension to the 4wd all he will be adjusting is the angle of the shocks - not the camber.

2wd front is entirely different. It is mcpherson strut, strut towers also look different.

Link to comment
Share on other sites

Can also add that the whiteline rear swaybar does fit, but you need to slot out the u brackets a bit and make some spacers (about 15mm per side) to straigten up the links as the rs rear end is wider for some reason. You can get by without the spacers, but the links are on a crazy angle and I wouldn't recommend it.

Link to comment
Share on other sites

  • 1 month later...

Another addition, as the front suspension is different, the info for s2 brake conversions doesnt apply to rs. The mounting holes are 12mm, so the same options are a direct fit as for an s1, eg r33 brakes. I wanted to use 34gtt brakes, and made new inserts for the callipers with an m12x1.25 threads rather than drilling out the knuckles as some guys have done. If anyone wants a photo or info let me know, but if you look at the callipers its pretty obvious :)

Link to comment
Share on other sites

  • 2 years later...

WHile this is an old thread by 2+ years. This is what i have found out about the rwd stagea,

- They use the McPhersons strut front suspension setup of the S15 (Bottom arm, 5 stud hub, shock etc)

- They have a 2 pot brake caliper and 280mm S14/S15 rotors

- The rear has no hicas

- Has an S15 rear subframe/arm setup (S15 hubs, S15 style subframe I Have measured this.

- Uses an R33 internal drum handbrake with an S14 style single pot sliding caliper

- Diff 4:1 VLSD

Other stuff I found out:

- 296mm R33 GTST Callipers/Rotors bolt straight up which means 33GTR Brembo's/350z Brembo's will too

- R34 GTT callipers/rotors WILL NOT fit, unless you drill out the hub as the calipers use larger bolts

- S14/15 adjustable rear arms etc all fit

- Uses S-body/R-body suspension bushes

- Tension rods are S14/15-R33/34

- Tie rods and ends are S14/S15

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...