Jump to content
SAU Community

My Hearse - M35 Build - Adaptronic


Brick
 Share

Recommended Posts

Yes I am.

I had decided to go nitto invo, called up earlier to make sure they had stock and they dont :( they have offered me yokohama advan sport v103 for $210ea which I think is pretty reasonable. So unless someone has had a bad experience and can tell me to stay away that's what I will be going with

Did you try St George Tyres for the invo's?

They are listed on FleaBay now so hopefully have stock. Cheaper on their web site though, showing the 245/45/18's at $175 each (bargain!).

Like the Dunlops Dale mentioned, they too can be rotated onto any corner which is great for wear.

Edited by Commsman
  • Like 1
Link to comment
Share on other sites

Did you try St George Tyres for the invo's?

They are listed on FleaBay now so hopefully have stock. Cheaper on their web site though, showing the 245/45/18's at $175 each (bargain!).

Like the Dunlops Dale mentioned, they too can be rotated onto any corner which is great for wear.

Gave them a call they do have stock. $185 fitted and balanced. Might give them a go then

  • Like 2
Link to comment
Share on other sites

How do you find the throttle cable. Have you had any ecu issues following this mod. This is one mod I would like to achieve next

Josh is running a full "Wire in" Adaptronic ECU now; This would be near on impossible on an OEM ECU.

I'd rather see Adaptronic support the OEM throttle, so it can be made to operate in a completely linear fashion (what you ask for at the pedal; you get at the TB).

Then it will be a complete solution.

Link to comment
Share on other sites

How do you find the throttle cable. Have you had any ecu issues following this mod. This is one mod I would like to achieve next

As dale said you will need a full after market ecu. There has been no issues as yet. Quite a fan of it. The only negative some people may have is that the gear uses the throttle through the standard ecu to control it. What this means is that in auto mode it uses speed to change gears rather then throttle and engine. The positive side though is that it doesn't hunt around for gears on the freeway etc which I love. Also with my combination it shift faster then if does normally. Manually the car drives heaps better.

Link to comment
Share on other sites

As dale said you will need a full after market ecu. There has been no issues as yet. Quite a fan of it. The only negative some people may have is that the gear uses the throttle through the standard ecu to control it. What this means is that in auto mode it uses speed to change gears rather then throttle and engine. The positive side though is that it doesn't hunt around for gears on the freeway etc which I love. Also with my combination it shift faster then if does normally. Manually the car drives heaps better.

So will it actually kick down in auto at all?

Are Adaptronic interested in properly integrating the OEM throttle, or have they not been approached about it?

Link to comment
Share on other sites

So will it actually kick down in auto at all?

Are Adaptronic interested in properly integrating the OEM throttle, or have they not been approached about it?

It will kick down via manual mode, or as if goes down to lower speeds it changes down automatically.

Craigs was tuned using the standard throttle

  • Like 1
Link to comment
Share on other sites

First impressions? I guess you haven't had much of a chance to try them out properly.

Yeah I haven't been for a proper drive yet. And had wheels in the back I didn't want flying around the car. But I can say they feel super smooth and are very quiet.

Hopefully get to drive it a but more tomorrow. The big test will be launches at the track on Wednesday

  • Like 2
Link to comment
Share on other sites

well the first night at the drags since being tuned wasn't a success, but i thought i would post a video here anyway.

the car had two issues, one that it wouldnt build boost on the line and second was hte gear box was over heating (tranny cooler will be fitted very soon) so it was changing up gear by itself and not holding in third like i told it to.

Best time 13.8 170km/h

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Lighting in the shed looks real good! Not lying, have shed envy lol. Maybe one day I can fk off from Metro Sydney.
    • I would be cautious with those 2000/2200 CNG injectors, swap them out for a set of 1550 aka 1650 Bosch stainless ones before you take out a motor.
    • I tested them all a couple times, haven't tested it warm or wet though. The only seemingly really weird thing was the cylinders plug closest to the dash was pitch black nearly.  Doesn't smoke out of the exhaust or anything.    Also sorry everyone for the very late response. Got busy with work and all and didn't get around to fooling with the car for awhile.  But an update! I figured out the cause of the lean condition, my intercooler had at some point exploded or something. It's clearly separated in a spot with black oily buildup around the leak, and multiple leaks in various vacuum lines. I've replaced it and the vacuum lines, and gotten new clamps and there are 0 leaks now after doing a couple smoke tests.   The car now runs significantly better and the exhaust doesn't overheat anymore. I still have the main problem though where the engine feels like I'm lugging it around sub 3500rpm in any gear besides 1st, 2nd It's less noticeable but 3rd anything under 3.5k and I need to downshift or the engine is clearly struggling when trying to accelerate at all, 4th is the exact same, sub 3.5k engine won't accelerate and its hard to bring it back up to speed, 5th gear doesn't feel like the car is going to straight up fall apart now but it still can't pull 5th. It slowly loses speed and rpm and ANY gas I give I can feel the shakes from the engine and it slowly dying. If I ever so lightly give it gas it will slowly and nicely decel till around 2k rpm instead of lugging. But it cannot accelerate at all or maintain speed.   If I go from first gear at 5 or 6krpm and then shift to second it also feels like it's struggling to make power till above 3krpm if trying to accelerate but I can cruise around parking lots at around 1-2krpm just fine in 2nd. It's just when accelerating hard it and changing gear you really notice it die down.  But even if you shift at way lower rpms it does the same thing till somewhere above 3k.  As far as I'm aware it's got r32 gtr transmission gear ratios with gts4 diffs. The tire size is 205/55r16 91h Above 3500rpm the car pulls and runs and drives quite normally and the power from engine sounds and feels very smooth.  It's perfectly driveable at above 3.5krpm but I drive on the highway alot for work and it gets really bad gas mileage in 4th at 4.4krpm. Not that I'm looking for great gas mileage with such a car, just I'm sure being at around 3krpm would be significantly better for it.    Have appreciated all your guys help. I do understand the engine may just be f**ked from running with a boost leak though.    One final thing I'd like to add is I'm only shifting so high in the rpm range is because if I don't I will feel the engine lugging bad with 0 power in lower rpms, pretty much anytime off boost trying to accelerate it feels really bad.  Also when I say 3500 rpm I don't mean exactly. Just around there. 
    • So what did you end up doing ?  and is it still alive today ?    
    • I run 2 x 525 pumps on factory 8mm fuel lines     ... zero issues, staged of course    Your setup should work fine, all you need to do is find the restriction. A good aftermarket fuel regulator is always a good idea too. If it's not your regulator i'd be suspicious of your fuel tank breather and your tank pressurising. Next would be something with the fuel hat. Then blow out the fuel lines.   
×
×
  • Create New...