Jump to content
SAU Community

R33 S2 Gtst Jolting Issues While Turbo Is Boosting


Nanga312
 Share

Recommended Posts

Hey guys,

i recently bought a 1997 S2 R33 gtst,

I have changed the coil packs and the cleaned the AFM along with buying a new pod filter.

Had the Cam Belts re done etc etc and she was running amazing except for when i go to boost it feels as though the power isnt there..

I then went and changed the spark plugs to NGK etc.

Now when im reaching high rev's about to hit boost the car just jolts... this has never happened be4. started happening after i changed the spark plugs. (note i have not re-gaped the plugs or anything)

My first thought was that maybe its the fuel pump but honestly no idea.

does anyone have any idea what the issue maybe.

Thanks in advance.

Link to comment
Share on other sites

1 other thought chap, did you install a boost controller? if you do, make sure it isnt set above 10-12 psi... if it is, just click it back a few.... you could be hitting the brick wall of boost cut.

Link to comment
Share on other sites

Hey paul i dont have a boost controller atm. Plugs went back in tonight and she isn't jolting anymore although now it feels like she is cutting out while trying to boost almost as if it cant handle it. Any ideas? Im thinking ill have to send her down to the mechanics.

Cheers

Link to comment
Share on other sites

if it is doing it at about 4500 rpm my man, its your coil packs. very common problem as with age they deteriorate.

find a spare set from some where and swap them out...

now bare in mind they are series dependant. s2 33 coils wont work on s1.

33 gtr coils will work on s1 but not s2. should be plenty around, if not check out amayama.com for a full set of replacement oem ones.

Link to comment
Share on other sites

Thanks mate... changing the coil packs was the first thing i did when i bought the car... i have ordered spitfire coil packs which should arrive today or tomorrow so ill put them in and see how we go.. thanks for ur help.

Link to comment
Share on other sites

righto!

if you have 12 coilpacks swap and change with them, find six that work. its a pain but always good to have em....

all good mate, do us a favour, WHEN you sort it, cos you will, pop back and give it an answer.

nothing worse than googling a problem, reading a thread, then finding out the OP didnt say what it was!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • So latest update. I replaced the ignitor with a jspec unit from enjuku. It felt a lot better at first although it is a little bit cooler of a day than it has been. Warming up didn't have as much misfire sputtering as before. Went on a 10m test drive. Felt good, a lot stronger though I was taking it easy on the boost. On the return trip started getting the cutting out at higher rpm again and was getting worse the longer I was driving. Took it easy the rest of the way home. Before turning the car off was getting the normal idle sputtering I was getting before.  So where I'm at now, entire ignition system has been replaced with upgraded components. Plugs still gapped at .8mm. Removed the fuel cap in case it was building too much reverse pressure I'm the tank, didn't help at all. Now I'm still on the same tank of gas the fuel treatment was in, I'm thinking if I can run that out and then refill with fresh 93 maybe  the treatment is too concentrated in some areas but doesn't explain that it only does it once the car is warm. I'm leaning towards fuel pump or injectors but if the injector was clogging I don't think it would make it shut off like it has but then fire right back up like nothing happened. So my current guess would be the pump. Without a fuel pressure guage no way to test or check it while it's running.  So that's kind of where I'm at. Need to start testing fuel components and ecu/wiring but I'm at a loss of what's the next logical step and procedure for testing it. 
    • @niZmO_Man thanks for that info, lucky I bought the gktech ones 🤙.
    • Never cheap out on brakes, tyres, suspension. I learnt the hard way at Oran Park lol
    • You got your answer when everything was OK after disconnecting your return line from the FPR. Why in the world are you running a 460, 2200CC injectors, etc. on stock 8mm lines?  Keep the pump, ditch the lines. I used both 8mm lines as my feed and one of my Hicas 10mm lines as return. 
×
×
  • Create New...