Jump to content
SAU Community

Headphones - Gaming Oriented


R31Nismoid
 Share

Recommended Posts

Razer Kraken Pro, $70, yes has mic built in.

Sound is pretty good, although the clamping usually hurts my head after a few hours with glasses on.

Compared to cheap Logitech my brother uses, Kraken is a lot better. The mic is a bit shit though, good noise isolation but doesn't pick up my "full" voice (lacks the lower frequencies, maybe I position it incorrectly).

Over, happy with them.

Link to comment
Share on other sites

  • 1 month later...

Thermaltake Shock Spin, cost around $70 from memory. Doesn't have a built in mic as per normal headsets, but comes with a clip on mic, which suited me better as rarely use a mic.

Sound is awesome, nice deep bass.

Most comfortable headphones I've ever used, self adjusting band and soft ear muffs are mint. Better than the Turtle Beach unit I had, too much clamp pressure which hurt after 30 minutes of use.

104a.jpg

Link to comment
Share on other sites

  • 1 month later...

I use a Logitech G4?? Cheap and Light and they don't interfere with the sound from my main speaker's as I ONLY use the Headset for Teamspeak and other voice comms while on-line.

If your trying to keep the House disturbance as low as possible as good set of Surround units is ideal as you can be in a FPS game and hear from particular directions etc IF the game has that sort of coding otherwise Surround Sound Headset is a waste of time and money (it is after all why we have 2 ears remember)

Link to comment
Share on other sites

  • 2 weeks later...

I use Astro A50's.

They are a supremely comfortable wireless headset. Sound is amazing and i've never had any issues with the microphone. I love that when I slide it back up into the vertical position no one can hear me anymore.

They are kind of expensive but I had a heap of JB vouchers from family members and haven't regretted buying them since.

Link to comment
Share on other sites

I use a set of Tritton Kama stereo headphones. Cost about $60 and has a built in mic. I got them on special from JB. They have decent sized (40mm) speakers and soft padded ear surrounds. They're awesome for gaming, plugs straight into my ps4 controller. The mic works with my phone and sounds good for music too. Win win!

Link to comment
Share on other sites

Sennheiser 650HD were $700 odd dollars a few years ago. Now about $450. These were purely bought for gaming (even though they're pro headset).

P.s doesn't really matter to much of what headset you got, if you got a bad sound card then the sound will not improve with a better headset.

Link to comment
Share on other sites

Astro A50 - PC

It's wireless, has a built in microphone, when I swing the microphone back up to vertical it cuts the mic which is useful. They are supremely comfortable (Had Turtle Beach PX21? headphones prior and they were comfy but don't even compare to the A50's)

Sound quality is amazing, I can't fault them.
They are expensive as hell, I was lucky enough my family buys me JB Hi-Fi vouchers etc. as presents.

I run them off the optical port on my motherboard but will be looking to get a proper PCI sound card in the near future to make the most of the headset.

Link to comment
Share on other sites

Logitech G35. By far the best value for money headset i have ever owned (and i would go as far as to say it is the best on the market). If i can help it i will never own another headset again. Honestly after being a pro gamer, and having sold the stuff, if you spend over $200 on a headset you are an idiot.

Mine is now 4 years old and looking a little worse for wear. So i'll get a new G35 soon.

I seriously can't recommend this headset enough.

Edit: to properly answer Op questions

Which headphones are you using for gaming etc? Logitech g35

Does it have a mic in built? Yes, fantastic quality, and it lifts up and auto cuts out.
How much did it cost? $109 i think.... around that
How did they compare to others you have used? Shits on headsets worth more than double the price.

Link to comment
Share on other sites

I ended up going with the Sennheiser G4ME ZERO headset. They also have a "ONE" line in that branding too at the same pricing

I had HD 555s (modded to HD595 spec) and loved them with an amp'd soundcard, so yeah giving the ZERO's a whirl.

I've got a Xonar Essence STX sound card with onboard amp, had it for a few years so the ZERO was the choice of the ONE due to the ZERO will perform better with some juice through them.

I didn't pay anywhere near the current retail price so they were quite a good choice for what I ended up paying.

Link to comment
Share on other sites

Yeah I'm not a USB fan personally.

I actually purchased G35s, used them for a week and went back to my HD555... They sounded so 'tinny' I couldn't use them, given I do listen to a bit of music as well through my headphones.

Link to comment
Share on other sites

  • 3 weeks later...

So how are the zero's then nismoid? Just about to buy a nice set, have up to $300 to spend.

Also lots of good reviews on the audio technicas.

I have a xonar DX sound card so im hoping should power them nicely.

Link to comment
Share on other sites

  • 2 weeks later...

I wanted wireless headphones with a mic, ended up with corsair vengeance 2100 they cost me $129 they work, only issue is the lack of Bass but sound good and are heaps confortable.

Link to comment
Share on other sites

  • 6 months later...

I should report back :D

Went with the Senn G4ME ZERO headset. The ZERO needs to be amplified and as I've got a Xonar Essence STX, that was no problem at all.

I forgot to enable the amp gain so initially I was like "These are shithouse like the Logitech USB rubbish I had"... Once I turned the gain up and put some power through them.

WOWweee. Absolutely sensationally immerse for gaming. Previously I had Senn HD555 (modded to 595s) and they were good but these are better again IMO. Did a bit of tweaking in the sound card settings and improved a bit more.

Would recommend for the money. Do get a bit hot after wearing for longer periods, but that's just a sign to get up and grab a beer lol.

Link to comment
Share on other sites

One thing to note, on my cheapie case, the front headphone ports (both in and out) provided inferior 'service/experience' i.e. they were crap. On my new case (In Win) the ports are much better.

This translate to better performance for my $70 Razer headset.

Link to comment
Share on other sites

If any of you really enjoy your sound/music then do yourself a favor and get one of these

http://fredsamplifiers.com.au/

I got one a year ago $40, transferred my awesome headphones into outstanding headphones.

Then I purchased a good quality copper cable and they are out of this world.

A lot of people don't think cables make a difference but they do, almost all headphones have shit cables even $1000+ sets

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Dont get me started on the N54 injectors
    • The base problem was the turbo actuator arms. I could have just done the turbos but opted to do all supporting hardware at the same time to really future proof the car for me. But yeah, wont be much change from $6k.
    • You can just swap the pins at the CAS connector side. You could go old school and use a test light to see which pin is going back to B1 on your ECU
    • maybe another thing for me to try? timestamped (i know its the nz wiring kit, but this is on the haltech software side)  
    • Well, I do turn bearing housings, shafts and wheels on special orders, so you can order any wheel sizing preferred. Parts came from every where obviously, came from reconditioning turbos and been shafted, I know exactly where certain manufactures would stuff up. It sounds like I'm just assembling cores, but importance is I get to check if all parts are made to specs, if castings are right, all clearances and runout are right, balanced ok, bearing pack sounds before passing onto clients.   Building test cars, doing dyno testing and sponsoring drift cars is all parts of QC, so I get to know how a particular package performs before selling.  Yep, its slow and ineffective way of production, but I prefer less headaches.   
×
×
  • Create New...