Jump to content
SAU Community

My Unicorn Adventures


rim32
 Share

Recommended Posts

So I ve been on this forum for a while now, and at some point even tried to document the build of my Stagea. Unfortunately being pretty busy, I let it slide. Now that I am traveling and got more time, figured I d get it done. Hope some of the stuff comes in handy for someone on here, I know I got a lot of handy info from this forum.

Link to comment
Share on other sites

So starting at the beginning, before I decided on the wagon life, I had a prelude...

189123_1681392674472_6226393_n_zpss0oplj

Not really my first choice for a car, but I just got my first engineering job and I needed something to get me from Nelson to Hamilton. Picked it up for 3K, got it serviced and drove it up to Hamilton. Over time I did a few things to it, nothing major. At some point decided to respray it, just because I wanted to see how it went. After that I sold it.

IMG_0674_zpswbg3mfz8.jpg

IMG_2254_zps9c1suyab.jpg

IMG_2422_zpsutapjflj.jpg

Edited by rim32
Link to comment
Share on other sites

The prelude did the job, got me around town, and even fit my snowboarding gear to take to the hill, but i always wanted a nice wagon... and so the search began. ended up finding a gem in Tauranga.

Here is the beast, 1996 RSFour, bone stock. Perfect

IMG_2891_zps76a28837.jpg

IMG_2893_zps74cf5a58.jpg

IMG_2894_zps21d8fd1f.jpg

Apparently the engine has had some problems, and the loom was replaced. Wasn’t too fussed, I wanted a project car anyway so I figured that ll just give me something to tinker with. The plan for it was just to get some good suspension, wheels and that’s it. I guess that’s how everyones project start right…

  • Like 1
Link to comment
Share on other sites

I was pretty stoked with the newly acquired wagon, and was looking forward to giving it a good looking over. Took it to a mates work and got it up in the air...

IMG_2922_zps04c49626.jpg

IMG_2924_zps6e094823.jpg

standard 10 years of wear everywhere. tried on some rims, and had a look at some suspension options...

IMG_2926_zps3b741530.jpg

ended up going for the same wheels, but in red. ordered those and some BC golds and began the wait.

Link to comment
Share on other sites

my goodies arrived

IMG_2931_zpsf5a121b2.jpg

IMG_2932_zps5f8d4895.jpg

IMG_2995_zps1b92f1d7.jpg

rear suspension ended up rubbing the wheel so some spacers were in order. Got them sized up and ordered. in the mean time ended up driving with stock rears for a while.

got to test the wagon on a few occasions... moved my girlfriend from one house to another in one trip!

IMG_3243_zps180c6a16.jpg

also managed to get some time up the mountain. everything fit awesomely in the back

IMG_7302_zps898ae2f2.jpg

Link to comment
Share on other sites

while waiting for the spacers to arrive, got myself some rear camber arms.

IMG_3026_zpsc84a7c0e.jpg

and here are the spacers! 20mm front and 15mm back.

IMG_3325_zps0dd27e9f.jpg

set about getting the spacers on...

before

IMG_3328_zpse7b4bc66.jpg

sorta after

IMG_3333_zpsf2846807.jpg

guards needed a roll...

IMG_3336_zpsdfd67ea8.jpg

IMG_3344_zps4ab38067.jpg

Link to comment
Share on other sites

so one issue that the car had is a mean misfire under load. As with most RBs, it can be traced down to the coils. So I decided to give it a go at fixing mine up...

P1000120_zps7c106ca8.jpg

P1000134_zpsbd1a59e0.jpg

Cleaned the coils up. A few hairline cracks, some hot spots that look like they were getting pretty brittle. I got some insulation spray and gave them about a million coats.

Misfire problem solved.

Link to comment
Share on other sites

One day driving back home from a trip down south, the water pump/alternator belt exploded and left us on the side of the road late Sunday afternoon. With the nearest town 10 minutes away, we were still out of luck as everything would be well shut by then. We did have a bed strapped to the roof so at least if we had to sleep there it would have been comfortable! Long story short, we got super lucky, got a tow into town from some nice old fella right to the shop, where we were again super lucky as the mechanic was just coming back into town from a trip. He popped in, put a new belt on the wagon and we were on our way again. Big thanks to that mechanic in Taehape. The resulting damage was only a cracked radiator. A new aluminium unit was purchased. Also a new transmission cooler was required as the original was part of the radiator. A neat little SAAB unit was found on trade me and with the radiator and oil cooler, the replacement began. No pictures unfortunately, as it was a job that had to be done quickly and I ended up having to do it in the middle of the night, in the rain.

476042_3150415239118_52471129_o_zps5zvzc

the oil cooler I ended up getting was a used piece from a SAAB. mean little cooler, fit perfect and did the job.

IMG_0475_zpsae8aaf69.jpg

after the radiator got replaced, nothing new was done for a while. Everything was working and I was pretty happy with the car.

Link to comment
Share on other sites

that saab cooler looks like a good bit of kit, you'll definitely notice the time it takes to get into lockup.

not much room on the guard wheel and shocks hey haha, after rolling the lip up you may be able to find a sweet spot with the offset bush and camber arms to give it just enough neg camber movement on the downstroke to clear the shock and guard.

coming along nicely mate!

Link to comment
Share on other sites

  • 2 weeks later...

Looking good man! Get some pics of the installed locations up :)

unfortunately this is the only shot i got of it actually on the car. you can see it on the bottom right of the licence plate.

P1010401_zps2164d46f.jpg

Link to comment
Share on other sites

Not too much stuff was done to the car for a while. I was pretty happy just driving it around and I was also pretty busy with my project bike at the time.

IMG_3374_zpsjivfshqm.jpg

IMG_2987_zpssdjzzhio.jpg

IMG_3854_zps9oydioro.jpg

had some interesting plans I wanted to try with the bike so that took a good bit of time

Link to comment
Share on other sites

eventually it came time for the first WOF. Nothing too major, and nothing too unexpected. CV boots needed replacing, and some ball joints needed replacement. This is when i found how hard some of the parts are to find for the stagea. At the same time some parts are piss easy too because of Interchangeability.

P1000236_zpsfb6cdae5.jpg

P1000240_zpsf8015fa7.jpg

Link to comment
Share on other sites

sometime after the wof, I ended up moving flats. Got our own place with a good size garage!

P1010183_zps1c2af01d.jpg

P1010401_zps2164d46f.jpg

P1010402_zps206c792b.jpg

now with a new garage, it was a good time to work on the suspension. after gathering all the necessary bits and pieces, the work began

P1010406_zps4628063e.jpg

...and then photobucket shat itself. rest of pictures will come eventually

  • Like 1
Link to comment
Share on other sites

Have to be happy with that garage.

Are you going to push the front wheels out more to match the rear? Or using them as your camber adjustment? Looks like fun man.

yeah that garage was pretty fun! I just used the LCAs to adjust the camber. Was going to get adjustable UCAs to push them out but never got around to it.

Edited by rim32
Link to comment
Share on other sites

so at this point, the original plan of wheels and coilovers isnt doing too well...

next on the to do list was a small project of replacing the foot hand brake with a hand one!

got the hardware

P1020134_zpse4725835.jpg

got the car ready

P1020135_zps5a0be299.jpg

P1020132_zpsab90f33b.jpg

P1020144_zpsee56057b.jpg

P1020150_zpse74548c9.jpg

P1020155_zps6c1ff3f8.jpg

leftovers

P1020162_zpsf22ce0fd.jpg

handbrake bracket

P1020180_zps1edd970c.jpg

spotwelds drilled out

P1020182_zps761ef8fc.jpg

and this is the piece we are interested in

P1020184_zps4d0efec5.jpg

clean up the area of interest a bit... the bracket was removed.

P1020185_zps5b4f6c59.jpg

check fitment

P1020186_zps4c625800.jpg

get your welder to it

P1020189_zps3c8f20be.jpg

and its done

P1020193_zps2ac79c00.jpg

next challenge...

IMG_0141_zpscfbd8239.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




×
×
  • Create New...