Jump to content
SAU Community

R32 Brake And Suspension Upgrade


sama1500
 Share

Recommended Posts

So last night i took my car out for the first time for a mountain run and it wasnt great, brakes were not up to par and cornering resulted in lots of understeer and generally very sloppy. I know next to nothing about setting up suspension properly, all of the suspension is stock as far as i'm aware and i have coilovers on there, it squeaks when i go over bumps currently (i'm assuming bushes are worn out) and the brakes are 4 pot front and 2 pot rear (m spec stock brakes i think), i also have 225 tyres stretched over 9" wheels all round (getting 235's soon)

my question is what should i be looking at getting suspension wise (adjustable arms etc) and what's a good brake upgrade for a 32?

Link to comment
Share on other sites

brembos are quite expensive even second hand, would r33 brakes, slotted & dimpled rotors, good quality pads and braided lines make a good difference? or even all that on my standard r32 brakes?

Edited by sama1500
Link to comment
Share on other sites

I have been reading through a few already and at this stage r33 brakes seem like a step up from 32 ones without draining my wallet, there's not as much on adjustable arms though, I know there's plenty of different arms/joints you can get but I'm mainly interested what out of thouse would be the most helpful for a street setup and what I wouldn't need to get

Link to comment
Share on other sites

Well if I'm going to be doing pads, rotors, braided lines and fluid the cost of a set of r33 calipers on top of that isn't going to be much extra, so instead of doing all that on my r32 brakes and possibly finding out it's not enough I'll need to get new rotors and pads again along with 33 brakes

Link to comment
Share on other sites

just coming up with evo stuff man, i was asking more along the lines of what bolts onto an r32, eg r33/r34 brakes, other nissans etc

Evo Brembo's have a much larger pad than the 32/33/34 GTR brembo's, hence why the Alpha gear is a good option, especially if you can get the evo 10 floating rotor.

Have you looked at Ksport upgrade kits? I picked up a set second hand, 8 piston kit for $700, better than both those options for track work.

The Nissan Brembos aren't much of an upgrade over the Sumitomos in my opinion.

Link to comment
Share on other sites

the alpha gear is still a bit on the expensive side, i had a look at the ksport stuff and definitely out of my budget new, 33 brakes from what i found are the same as 32r brakes (not the vspec brembos) slightly bigger callipers, and rotor thickness + diameter, and they can be found quite cheap second hand leaving money over for braided lines, good pads and slotted/dimpled rotors, keep in mind my basis for comparison is stock r32 brakes with old pads so i dont think i'd need some crazy good setup for it to be an upgrade over what i have now

the main problem i was having was suspension wise, the car was quite bad when going through tight corners, understeer everywhere, what's a good measure i can take to fix this? arms/bushes etc

Link to comment
Share on other sites

i think i may opt for r33 gtst brakes, they're a straight bolt on using the same lines and everything, may not be a massive difference from r32 brakes but coupled with all the support gear i think it will be a substantial difference, anyone with any knowledge on basic suspension tuning who could give me a few tips for dialing out understeer and generally making my car handle better?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • In the first photo you posted, the colour of the control arms are the signature colour for Ikeya. Same for the swaybar, signature colour for Whiteline.  I like Hardrace, they also do hardened rubber bushes if your car is mainly a street car.  I like GKTech as well, but they use a lot of rose joints in their stuff so might not be the best choice for everyone.  The system might have been good back in its day, but it's a prehistoric system now. I suspect that most people have removed the HICAS as they want the car to do what they want to do, not what the car wants to do. From what I also understand, it isn't consistent in it's behaviour on track so it's hard to trust the car/know where its absolute limits are for track use.  Having said that, I think the HICAS eliminator kit was the first thing I installed when I bought my car. I don't personally have any experience with the HICAS system on a race track.  
    • Thanks for the info. Didn’t know I had aftermarket control arms already? Will talk to my garage. What brand would u recommend if I want to play around with my camber more? I would think my camber is around stock level right now or more negative now due to lowering with coilovers. I will be lower her again 1.5 cm to get some more.    also why does everyone like to remove the hicas system? Is it because most don’t work properly anymore or ppl just don’t like them. Mine is functioning as it should be right now.    thanks for the good info 
    • It looks like you've got Ikeya control arms and an aftermarket sway bar, maybe whiteline?  Or am I just going crazy? lol Unfortunately it won't, but what it will do is look really pretty. That's about all unfortunately.  How much neg camber do you currently have? Generally lowing the car dials in quite a bit of neg camber as it is. If you do go down this path, your best bet is get adjustable arms, toe arms (or preferably a good HICAS elimination kit) and traction rods. With all 3 being adjustable, you'll be able to dial out any bump steer that is introduced by playing with the camber settings. 
    • Great discussion guys. I just have coil overs in my car right now. Ride is pretty stiff and everything feels very precise and accurate when hitting the corners. I started off with a high level and kept specimen.   the only item I feel I might need to adjust is my camber with control arms or a kit as I might want to tuck in my rims more so there is no rubbing. Otherwise I have not thought too much into it as quite happy with the setup. I think the bushings are all good still.    My motor is currently out now but I have got a nismo front strut bar to install. So that should help with body roll in front.    added a photo of what I started with before the modding or let’s say modernization of parts started. 😂
    • Thank you both, much appreciated. Yes, 6k miles, not a typo lol. The underside, engine bay, engine, trunk, interior, etc., look great and super clean, has all the splash guards too. Not sure if you can expand the photos, but the dash pic shows the ODO. She looks brand new, inside and out, even has the original Nissan TV/DVD/Nav head unit; still thinks it's in Tokyo haha! I used to own a '94 MKIV Supra, sadly sold it years ago, but wow I love the Skyline so much! The R34 gets SO much attention here since they just became legal to import last year.  
×
×
  • Create New...