Jump to content
SAU Community

M35 Brake Switch Cutoff Mod


benriches
 Share

Recommended Posts

Disclaimer: There's a lot of people recommending to do this mod, but I haven't seen any idiotproof guides on how to do it. I'm not saying this is the best way to do this mod, it's just how i've done it - and hopefully this will help others, even if they don't follow my way 100%.

Brief overview: The general consensus is that from Factory, M35 Stageas limit throttle to 30% for up to 3 seconds after releasing the brake pedal. This can prevent good launches/coming out of corners faster. By cutting the signal wire to the ECU, we can maintain full throttle immediately after releasing the brake. It is OK to cut this wire, however you will get a Check Engine Light after some time. By rigging it up to a switch, you are able to disable/enable the mod freely.

  1. Behind the glovebox is the ECU. You will need to dissemble the passenger side interior to access this, there's other guides online on how to do this - so I will assume you have your glovebox out and are looking at the ECU.
  2. Pull the plastic off guard off the ECU connector, it clicks off the 4 tabs on each corner.
  3. Find the VIOLET wire with the BLUE stripe - you can see it in pictures 1 + 4 of this post. I cut this wire, and attached either side to a terminal block. You can pick these up from JayCar very cheaply - I used a terminal block because I don't trust myself to solder wires coming directly off the ECU.
  4. I then picked up a small, discrete ON/OFF toggle switch (also from JayCar), which I mounted in my Glovebox - see pictures 2 + 3. Lastly just attach these wires to the remaining spots on the terminal block.
  5. Test the switch while everything is apart - This way you can fix any problems before reassembling.
  6. Done!

Picture 4 of this post explains the above if anyone is unclear.

Some people have hooked this up to the reverse switch in the car, so they don't have to touch the switch ever - however I like the idea of a toggle, so I can limit throttle power when a family member/friend drives the car.

post-141380-0-05654500-1444126203_thumb.jpg

post-141380-0-67950200-1444126206_thumb.jpg

post-141380-0-68487200-1444126212_thumb.jpg

post-141380-0-24624700-1444126217_thumb.jpg

  • Like 2
Link to comment
Share on other sites

I like it but it's going to be a bit of a stretch to flick the switch when you are driving.

Definitely - Although I think of it more as a valet switch, however. When I drive the car I leave it enabled, if I take the car to a mechanic or lend to a friend I will disable the switch.

Can also disable the mod to clear any CEL that appears. You could mount the switch wherever you like, though - It's just where I put it :)

Link to comment
Share on other sites

I like it but it's going to be a bit of a stretch to flick the switch when you are driving.

Agreed.

Mine is a latching switch down next to my right knee; push it in, hold down brake lightly for 5 sec, push switch again to release; good to go for another week or more.

Link to comment
Share on other sites

The only Violet with a white line wire I can see is the engine revs to Hicas ecu wire.

Can you take a pic of the back of the plug?

Edit, I just noticed it looks like the correct wire at the top, but the one you pointed to is not actually connected to the switch? or is it just the pic. Looks pink/white.

Never mind, I must be tired. :P

Link to comment
Share on other sites

The only Violet with a white line wire I can see is the engine revs to Hicas ecu wire.

Can you take a pic of the back of the plug?

Edit, I just noticed it looks like the correct wire at the top, but the one you pointed to is not actually connected to the switch? or is it just the pic. Looks pink/white.

Never mind, I must be tired. :P

Yeah got it from the below threads haha - It's definitely the right wire, my colour perception just isn't very good lol.

Link to comment
Share on other sites

  • 2 weeks later...

Now that I'm running a MAP sensor I can do cool stuff like video what this brake mod actually does. Enjoy.

Matt

Nice videos, can clearly see what this mod does.

Edited by DrLui
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Y'know what, after reading a topic on a 360kw build using a nistune (who ended up going LINK), im now considering a LINK over a nistune. The engine protection alone would probably be worth it. And id like to learn to tune so would be nice to have that safe guard. Which means i probably wont need a boost controller then, or the R35 MAF.  Becoming a bit of a blog now but oh wells. As mentioned previously, the goal is around 300kw, for a daily driver. Will be looking at fitting a highflow turbo or similar (something that doesnt require downpipes, manifolds etc to be changed out) when the current stock gives out or the money for it is there. 
    • Thanks guys. Are you meant to tighten the converter bolts through the starter motor hole? Think my plate between gearbox and engine is one piece. Im heading up there tomorrow.
    • Picked my tailshaft up yesterday arv!! Test fit it and because they've gone to a ford centre bearing and CV I had to modify the mounting bracket a little bit. 5mm of each side and she went up into position and fits well. It has a 1350 uni and flange on the gearbox end so it should be plenty strong!  Got stuck in this morning and started on the wiring mess. Cut out all the wires not required that go to the body connector and cut the engine harness out. Need to go through and work out which ones I need to keep and rewire into the new ecu. Should save a small amount of weight as well. I'd love to get in and rip the dash and everything out to completely remove wiring but cbf.  Next up was the power harness for alternator, starter etc. It has a few connectors from factory that run out of it. Cut it all apart and removed what was no longer required and put some new corro and taped it all back up and bolted it all back into place.  After that I worked out where I can mount the new flex sensor. Found a couple of factory bolt holes and drilled a new hole on the bracket to suit. Need to go get a few fittings and adapters tomorrow so I can keep going.   
    • Nah, im after the more newer looking, one with the OLED display
    • We revised the neutral wire instructions. The old way was wrong.  R34 gearbox change.pdf
×
×
  • Create New...