ashheron

Hey, Looking for an r32 rb20 Radiator in Brisbane. PM me or SMS on 0439331849 cheers, ash

Hi Guys, As the topic says I'm in need of 2 x Stock R32 Rims I'm Located in brisbane Please contact me via sms on 0439331849 or email aheron @ bigpond.com Thanks

Hey mate Looking for 2 x GTS-t rims.. Pm me and let me know if they are available.. I can pick them up cheers - ash

EDIT: GOT ONE!! thanks!

I have a set of s14 calipers and r32 calipers.. they would use the same pistons right??? out of the 16 pistons there im bound to have 8 that still work!

well.... thats quite pricey... fingers crossed all the pistons are ok and at worst only need to replace the seals

Hi, I just bought s14 hubs knuckles calipers and rotors from the wreckers... basically wondering if It is necessary to have the calipers rebuilt?? Or will it be alright to wack them straight on just with new pads? If it is necessary to have them rebuilt, where in brisbane would do this and for a good price? btw.. have replaced the rotors with dba slotted rotors.

As the topic states just looking for 1 r32 gts-t stocko mag.... Let me know if you have 1 (without buckles) lying around prefferably in brisbane... thx

I got r32 rotors hubs and knuckles.. only looking for $150 if they are of any interest to you.

I probably should of mentioned im running a EMS Stinger ecu.. So will I still need the resistor pack? How many cc are the rx7 injectors?

Hey! I have an Rb20 in an s13, just had it tuned and the injectors are maxing out if we go any higher the 11psi. I have have been looking around and basically read that r32 GTR injectors are a good budget upgrade for the rb20. Just wondering 2 things: 1. will I need anything else to put them in?? fuel rail etc..?? 2. How much $$ would I be looking at in total?? (already upgraded fuel pump) Thanks!

Just wondering if anyone knows what it means when your turbo squeals really loud whenever you go onto boost? is this normal? or is the Turbo on its way out or what? there is very minimal shaft play... so i wouldn't think it would be dying.. :| Its running 14psi with front mount, aftermarket ecu, 3" exhaust.. any help would be much appreciated.