Dan93

The tyres should be fine if they're just sitting for two weeks man. You could have something draining the battery more than usual, mine used to sit for 2 weeks and then have a flat battery. I think it could be that

Keep your tyres properly inflated. How long does it usually sit?

Hi guys does a R33 GTR intake snorkel fit a GTST?

Brakes were bled. It doesn't leak. I don't see the problem here.

Been driving it doesn't leak at all and brakes are working fine. Must be lucky haha

Instead of going 9.5. Wouldn't having a 9" make it fit easier? That way you'll have a tyre that matches the width correctly with no stretch.

I know I wasn't supposed to split it, but I didn't know those bolts held the caliper together. So now I've got to get the caliper pulled apart to replace the o ring? OK bleeding it isn't such a problem now considering I don't know the problems I have made, by slightly loosening the caliper. Edit: I'd also like to add that it is not leaking at all since I did up those bolts.

Yes the caliper split slightly, but I still had the top one done up. It was only till I loosened it slightly that fluid came out. It's all together and well, I just need to know if I need to bleed that brake specifically. I will bleed them all when I get the chance, but would I be able to drive it as it sits now?

Hi guys just a quick question as I've done a search. Do I need to bleed the front passenger side brake? This was my first time having a go at changing the rotors and pads and I undid the bolts that held the caliper in place (starting from bottom to top). I realised that when I undid the last top one slightly some fluid came out so I redid it. Now I'm wondering do I need to bleed just that side? Thanks, I'm new to brakes so be gentle.

Wait, so you're putting an rb20 turbo on?

Stock at the moment, will mostly get 230rwkw once I'm finished with it. Used for the hills mainly.

Before you do power mods. Perhaps make sure your brakes are up to the task. Definitely get a full exhaust system first though.

I don't like the idea of a tyre being smaller than it should be. I obviously want it to look good and tyre fitment needs to be spot on. I'm not worried about paying more for a wider tyre.

Damn no good. Those tyres will be too skinny. At the moment it's got 17x8.5's on the front with 235's I think and 17x9's on the rear with 255's. No idea on offset, but you can get a slightly angled finger in between the rear tyre and guard.

Haha! Good Ol Matty at Spikes ? I was there last week, got him to realign my door so it closes properly.