frog_stompR31

still have same problem it misses on idle but i took it to a dyno day and made 139.8rwkw can anyone help me out need to know what will stop it missing on idle havent changed plugs only changes afew that looked dirty may need a new set and a cas ill try but will a blocked fule filter do this also cause it tthe rb25de one from my last half cut havent got a new one yet

thrust bearing may be ****ed does it do it all the time or only when you let the clutch out ...?

have you over heated it

i have a rb20 in a r31 and it misses on no6 at idle ive done every thing and it wont go away i look at this thred and then looked at my coil packs none are cracked but i can seem to find what it is does anyone know where i can get the hand held plug in diagnostic unit .... and how much or know what my prob is i have also replaced all plugs and igniter injector no6 and injector o rings also replaced no 6 coil

for my rb20 det

i got some off my dads mate hes a mechanic he had some thst fit as i changed an injector on no6 and all the o rings could probably send you 6 will cost ya 50 if ya want em and thats if they fit

--------------------------------------------------when i want ok as for police when ever would they look on here ---------------would rather catch ya speeding any way and get more revenu.... than waste time on the net Frogstomp, If you have a problem report the post or take it to PM's.

have you been donw to burken head bridge as they have need it a truck was they wash off cement its hella slippery and fun just gotta look out for cops etc and security but you can get away with it easy or some where out the back of the port like neer easturn prade theres plenty of room may see you out there one day i have the only peperment green r31 in adelaide

as the title says any one interested in a vg regal it has 6 cyl rego but v8 fitted 600 holley and 4 barrle manifold and 727 auto 323 diff gears mild can 2000-5000 rpm electric fule pump and hi flow oil pump etc no extractors stock zorst great car for young guns looking for power or valiant restorer in adelaide call 0403994706 price $1500 as is need a new home

a rb25 turbo will make your r32 br20 go way better i know of people with vg30 rolla bearing turbo on r32 and they go hard with the boost up but the boost starts late and goes all the way to 7500 rpm you will need a fmic and bigger exhaust to make full potencial of this turbo im looking at a rb25 one or a vg30 one ...? but the vg one has to have the oil lines made bigger or some thing so it will fit ...? you could probably use all your rb20 oil lines etc ...? these will all bolt up to a standard 20 turbo

i went and changed all my injectors o rings with new one as i thaught the injector was leakin a bit and it was but it does still miss a bit ill try a cas ....

i havent tryed a cas yet but ill look into it thanks but my afm is ok as i take off the connector and she dies out the motor will not run ... not looking at going through all the shit threads etc to do so as i dont se many people withe this same problem yes its only on No6 at idle

help me i have a r32 motor its a 92 year mod the problem i have it miss fires on No6 only on idle and is fine when reved passed 1750 rpm i have so far added plugs and coil packs and even moved my old ones around no change the loom piece between the coil packs and the igniter i replaced and no change i also got anothed igniter and no change the car also seems to idle low i also when to the efort of doing a comp test and all cylinders have the same 150 can some one help me out ...?

ill buy your front struts for $250 for the both and they must be complete e mail me if you are interested they better be ok

i had a rb 25de out of a r33 in a r31 aussie skyline and it was auto it was not so quick as vl's and r31 rb30e took off better at the lights but you did come crawling back in 2nd i now have a rb20det 92 year motor and 5 speed box etc i never took it to the drags i did thoe drag a mazda rx7 series 2-3 with a 12a brige port and 51 mm carbies etc and exhaust tec zorst when hard but i came back hard as only when i got second gear and the revs up