jerry

Yeah i have jack and stands. Cool. I suspected it was all bolts and nuts. Does the angled exhaust sit lower?

Also, Does the Angled system sit lower to the ground?

Do you need any special tools or can i do this job at home. I am looking to buy a 3" XFORCE CAT back (angled) exhaust system. Do i require any further tools (welding etc)? Wouldn't mind doing it at home if its easy. Looks easy. But i am not sure if the angled exhaust requires more work. Thanks in advance guys.

thanks. I have found it.

My engine is an RB25Det. (R33)

Does anyone know where to get the engine number. I already have the chassis number. thanks in advance. Jerry.

i didn't know there where 3 valves. Where is the "big loop thing" valve?

I have tried that. Could it be something to do with the slave cylinder?

Hi, Car:r33 RB25det Type: Manual 93. I have bleed the master and slave cylinder but i can't get the clutch pedal to return to the top of the stroke. It seems to sit in the depressed position. Does anyone know what the problem is and how i rectify this?

Does anyone know what clutch fluid to put in the reservoir. Is it gearbox fluid? Or is there some special clutch fluid you use in the reservoir in the engine bay. This is for an R33 RB25DET series 2. Cheers, Jerry.

Hi, I hooked up my Consult software and found that i am not getting a TPS voltage. It seems to stay at 0v when connected and 5.1volts when disconnected. Does anyone know why i am not getting a reading to my consult. Furthermore, if i can't get it, is the ECU able to get it and adjust the fuel accordingly. Cheers, Jerry.

Anyone has a copy.

Hello, I just dropped my engine and gearbox into the R33 Series 1 RB25DET. There are two signals from the gearbox (neutral and Reverse) that have no connectiions to the harness engine wiring. Does anyone know where the signals from the car (engine/harness) are to connect to the gearbox plugs. Totally lost as to where it goes? Cheers, Jerry.

Hi Guys, I have cut my front intrusion bar (or reinforcement bar) of my series 1 R33 get more airflow onto my intercooler. I now understand it is illegal. Anyway, can i reinforce the standard bar to meet regulations or do i have to get another front intrusion bar. Cheers, Jerry

Hi people, I want to re-spray my car to an orange colour. I was interested in the orange color, either Ford or Holden orange. Any ideas on what the colour codes are for these. Or any suggestions on what colour is good. Thanks guys.