skyman

Short notice but I will be racing tomorrow with a couple mates so if any else is heading down come and say hi. I will be in my red r33... I'll be there early to beat the rush... Cheers Karl

I'll be there in a red r33 so be sure to come over and say hi, I'll be with a mate in a blue 350z too... Will be a great night as always Karl

Do you know which pin out the trigger is? I will try this on the weekend, this will run full volts to the pump though won't it? I'd still like to find the original problem any ideas on how to start?

Hi Guys Im getting an intermittent signal to my fuel pumps positive wire it just goes on and off when ever it feels like it?? I have checked the relay, fuse and changed fuel pumps all with no effect. I have tried re earthing the pumps negative which had no effect. Does the ecu give the the signal to the fuel pump? could the ecu be damaged? how do you check it? and if so what pin out is it? I am using a PFC and the car is an 94 r33 gtst. Any help would be great...

I have this exact same problem. Have you been able to figure out what was causing it???? any help would be great cheers

hey guys, I have 17" rims, intercooler piping and some other smaller parts the need to be sandblastered. Does any one know anyone or anywhere around the Rockingham/Mandurah area. cheers

hey guys after some opinions, should i get a new original sparco seat cover? or give the one section thats ripped a re-trim? does anyone know anyone who sell/repair them? cheers

hey guys, im looking for a housemate in Mandurah big block 4x2, double powered work shop out back plus heaps of room for other cars, house is alarmed anyone welcome but u must have a job fully furnished but need to have ur own bed rent is $125/week plus food and bills lease for 3-4 months with possibility for another 6 after. please call or leave msg cheers Karl- 043 011 7974

i couldnt wait till the weekend lol anyway the cas imput shaft ( half moon thing) looks like its snapped. does anyone know of the correct way to relpace the shaft or do i need a new cas??? and does the shaft come from the sensor or from the cam? thanks agian for the great help guys!!

cheers guys. ive had air flow meter problems before as well as intercooler pipes coming off, but the car has always started even without the airflow meter and with intercooler pipes blown off... ill check the cas this weekend but how would i know if its broken if its not cracked???

hi guys any help or ideas would be great. S1 r33 gtst, that has never missed a beat, a few days ago it started to violently backfire under any throttle. and once the car was turned off it wouldnt start again. it turns over fine but will backfire (one massive backfire) during it being turned over?? just put new plugs in still wont start i have PFC and AVCR all the sensors are working everything looks normal i also have 12 month old splitfire coils i have fuel pressure and fuel pump is working not sure wat else it could be??????

yer man ill be there i got a red 33 with black wheels... ill get there around 5 so hope to see ya there should be fun...................

gain, as in start duty? if so i have set 5th gear start values at -20% in order not to reach 1.8bar but it isnt stable and fluctuates btw .8 and 1.2.

ive set all of them at 2. ive heared that if i increase it will decreases stabitity because the solenoid will over correct it self? wat have u set urs at?

hey guys i just installed an avc-r to my r33. but im getting really high boost in 5th my boost settings at 51% duty and 1.30bar, all other gears are fine but in 5th it often reaches 1.8 under full load. to counter this i set the 5th gear duty down 20% in order to control, but its really unstable and fluctuates btw .8 and 1.2 bar? cheers