wolf

yep tacho moves aswell

yep but what i have found is when i do an ecu reset it goes for a few days. also when it does do it i now give the accelerator a bit of stick and it goes and stops doing it till next time the car is switched off. but got mv auto's valve body a new filter and oil for it so see if that cures it

nope i have the standard ecu and no other add on computers i did do an ecu reset and was fine for a few days then came back

thanks for the advice sorry for all the questions but is the first auto i have had i will check all the wireing and also is there an ecu type controll box for it and if so were is it?

no the o/d light dose not come on intermitently but what i have noticed is the power light comes on sometimes under hard exceleration even though its not been selected

thank you

any one ???? please

hi i have a small issue with my r33 gtst. running 250bhp (186kw) when driving along at ANY (even at 80 or 90mph) (128 or 144kph)speed and holding it at a set speed its like it drops in and out of overdrive but as soon as i come of the throtle and back on it or press the throtle it gose back to normal till it dose it again. i have done a system check via the power button light and i got 1 long flash followed by 10 short flash so there seems no faulf on there and the atf level is ok and no burnt smell. this is confusing me and i want to get it sorted as i have mv auto's valve body for it but dont want to put it in if the box is knackered any help apreciated please