fubar
Members-
Posts
74 -
Joined
-
Last visited
-
Feedback
0%
Profile Fields
-
Car(s)
R32 RB25
-
Real Name
Dan
fubar's Achievements
-
Prob bit cheaper then that, How wide are the rims?
-
Heya All I'm after any sort of rims to suit my r32, 16 x 7 to 8 inch wide (preferably 8 inch wide) They dont have to be good just round:) even miss match Im located in Perth Cheers Dan 0434 313 923
-
Cheers guys all sorted now
-
Hey all As per topic. Finaly got another motor in but now the tps sensor has failed me and im trying to get the car ready for powercruse this weekend. Call or msg 0434 313 923 Cheers Dan
-
R32 And R33 Clutch Master And Slave Interchangeable?
fubar replied to fubar's topic in Drivetrain and transmission
Cheers mate got it sorted just kept bleeding and eventually got it yeehaar! Dosen't feel the same but at least it works. the clutch i got is really heavy so i guess its a struggle for it, its a OGR brass clutch, there a prety crazy clutch Now i have another prob just took it for its first spin with another motor in and something went pop when under first boost and now the revs wont drop below 3000rpm! guess i'll have to put another post up!! Thanks for your reply buddy -
R32 And R33 Clutch Master And Slave Interchangeable?
fubar replied to fubar's topic in Drivetrain and transmission
As in the thread on the fork where it connects to the clutch pedal? i wound it all the way out so it would connect onto the clutch pedal. Sorry newb at this I haven't done any of this kind of work on clutches befor, want to sort it myself -
Hey guys Just changed my clutch master cylinder on my r32 to a r33 master because i needed a shorter one for my engine set up. Running a rb20det gearbox and slave cylinder. I have bleed the lines and i now dont have enough travel in my slave to disengage my clutch. Do i need to match the r33 master with a r33 slave??? or did i just stuff something up when i put the motor and gearbox in!
-
Heya Guys Slight problem, i've been trying to find out everywhere what is the oil flow is out of the block but with no luck. There is a remote grex oil filter and cooler in my car and a im about to put another motor in. Just want to make sure i got the right flow throught the filter. I'll put up some pics when i get home this arvo. Any help would be awesome Cheers Dan
-
oh pm or call 0434 313 923
-
Heya Guys As per title says. Located in perth let me know if anyone can help I just smashed in a spare motor and it in and it didn't last long 400kms, very noisy bottom end now. just pulled it out and about to pull the head off and hope the head is ok:) so i might only need a bottom end. Cheers Dan
-
Hey all looking for a good condish rb20 manual in perth PM or 0434 313 293 Cheers Dan