Leithy

This drain here goes into the sump fitting I welded on. Now T my catch can Into that or the turbo oil drain will that be equivalent to a oil drain kit they put in the back of the head. Since all I've read is that is just equals out air pressures so it drains for efficiently

I have a barbed fitting welded on the sump for my VCT oil drain

I recently got my 25/30 car back and thought give it a drive. 5 mins of giving it some curry my catch can was full and overflowed through the breather filter. Painted a mural in my engine bay haha. Now my main question is would a catch can with a drain back to the sump be equivalent to the head drain kits such as spool and lewis engines? I have a welded on fitting on my sump for the VCT line so I can either t-piece catch can into that or the normal turbo drain

It's a genuine garrett. 600x300x76mm intercooler. It's got a boost/vacume leak at the throttle body shaft so I need make a adapter plate and run a different throttle body and shud see over 300kw

Here's the turbo manifold I made in my shed for my r33

Mods rb25/30 Hks 272 cams Garrett gt3582 anti surge Sard 850cc injectors Self made turbo manifold and 3 inch exhaust 45mm hypergate Freddy manifold Splitfires Still has a boost leak through the throttle body shaft

Will have to look Into 30 pump cheers for that. And that's what I was told they done to it.. I never looked into it too much so don't care if it sounds fancy or not

30 pump stronger? And this 25 pump has had the relief valves modified and runs more pressure

Yeah you can

Bump

Intercooler is sold

Have lots of r33 parts for sale Pink label afm $50 Rb25det series 2 CAS $100 2 sets of RB25det injectors $100 2x rb25 turbo manifolds $50 each 2x rb20/25/30 flywheels $50 each Blitz return flow intercooler $300 2x series 2 r33 ecu $80 each Rb25 cam gears $50 All located at port augusta, Can post anywhere Photos on request or txt me on 0429111334 and I can send you photos

What better ways are around this?

So this is just a breather?

Will do mate