fritters77

I hard wired the pump on Sunday and has fixed the problem........for the $50 worth of parts and 1h of my time well worth doing ...... Only thing when doing the mod was making sure you cut the right wires and put the right wire in the right spot on the Relay other than that pretty easy to do....... Just keep a couple of spare Fuses in the car and your all good... In case anyone else is interested in doing this mod the 2 wires leading to the fuel pump were Black /yellow + and purple -....there were 5 wires going to the top of the fuel tank the 2 pin plug is the one going to the fuel pump and those 2 wires were thicker than the rest so made sense..... thanks for your help people......

haha very true thanks for the interest though........i'm going to hard wire it this weekend then Nistune time finally.....

Yeah im going to do that for sure ,,,that must be it... Thanks for your help.....

Yeah I'm to sure what's going on I might have to pull it back out and check all the hoses make sure there is no splits or anything but its almost like there isn't enough power voltage for the first surge of fuel then it catches up....

Hi Fellow Wagoners I just installed a new fuel pump a Walbro 255l and all went together fine except Now when i first take off or put my foot down in any gear it seems like the fuel pump is struggling for a second then off we go,,,,,,, i noticed after it was all done and installed that everyone is direct wiring them will this fix my problem......Or is this a different problem like the ecu cant work out whats going on with the new pump . I did try and search for this but came up with nothing other than you should directly wire the fuel pump to get the max out of your new pump... Any help would be much appreciated... Cheers

Yeah I'll prob just get a new one.....cheap enough,,,,,, Thanks for your help gents......

Yeah it's a rota wheel it's about 50mm long...... How much did it cost ruffly if it's 100-150 and If there is a chance that it could crack again it might be worth just getting a new rim from rota...... Thanks for the info too.....

So I couldn't work out why my tyre kept on going flat couldnt find a hole anywhere so I chucked it in the pool and found that the rim was cracked on the inside,,,,,, So dose anyone know where I can get it welded up if it's possible ,,,,,,,,,... I'm in Sydney..... Cheers

Pm sent

Hey mate Keen on some Eyelids,,,,,Price to Sydney please.. Cheers

Thanks for the input .......I will still go with the Nistune but just came across it searching for other stuff.......and wanted to know what others thought..... It seams more like a bandaid fix....

Fellow Wagoners Just want to know if anyone has tried one of those DFAS Chips from Ebay.... And if anyone has had any success with them.....Like ironing out the 5k rpm hiccup ..... Im looking at getting Nis-tune done But just interested if anyone has tried this.... Cheers

Yeah no worries , There is always someone looking for some new Rubber.....i cant believe someone could charge that much for the same tyre what a rip...

Yeah tempe were the cheapest that i could find ........ Give them a call they will send them down to you 02)8577 8577

Just got some Ku31 245/40/18 for $170 a corner if anyone is looking for some new rubber.. From Tempe....