SABBAi

Sounds like you got yourself a ripper of a car, except it may have a suspect service history. Just a relay hey?

Tough break Bris. Awesome car though.

Man that's a trick looking engine cover you got there. I went down to super cheap this arvo to see if I could pick one up for my 25DE auto and they had run out. The shiney bits on the right was additional to the kit. Did you have to pay much more for those??

I thought I would share one of my old projects. In the search for my braking power, I decided to bolt up some 300mm discs to my Telstar. (yeah yeah, get over it ) I tried fiddling with R32/R33 GTS-t stuff, but I didn't want to cut mounting tabs off the calipers or cut into the knuckles. After searching the DBA catalogue, Integra Type S discs seemed like a good choice as they were close to being identical except for the increase in diameter as seen below. I decided to make up a dogbone bracket to mount the standard caliper bracket, so made a template out of 19mm thick wood to make sure my measurements were right. After I had it all sorted, I then machined it up at work and turned up some stainless steel sleeves. Then the brackets were treated to a light bead blasting. Template/trial bracket. All done! Disc size comparison. Bolting them up. Sitting behind 16" and 17" wheels. They've been on about 3 different cars I've owned over the past 4/5 years and have worked flawlessly. They now have a pair of RS Liberty twin piston sliders in the standard brackets. with Goodridge braded lines. They are soon to be replaced with EVO 6 discs and calipers front and rear

Here they are painted with the exstinuisher mounts. As I wanted the harness mounts to be nice and solid, I decided to weld a mount to the stardard seat rail mount on the tunnel. Also replaced the standard B pillar seatbelt mount. And here are the seats all mounted.

Hi Guys, I thought I'd share the build on my seat rails to fit a pair of Sparco Evo Juniors into a Telstar. (Yeah, yeah, get over it ) As there are no off the shelf seat rails readily available, I decided to build up some rails myself. That and I wanted them with exstinguisher mounts. As I wanted them nice an low I decided to use some 50 x 25 box tubing with some 6mm strap for the mounting tabs. The front mounting tabs were heated and shaped. I added as much bracing as I could so I could get them mod plated. Onto the Pics!

I wont be there tonight. Stuck in Townsville awaiting parts...

So I have a mate flying in from Melbourne on Sunday arvo to pay a man some money for a track prepped 35 and competing in the Annual Nissan Time Attack. Should be most excellent!

Does this mod increase the speed of the gear changes?

Meh, sif I can be bothered.... on other notes, McCrae, Do this.

Who's flying up to Rocky tonight until Wdnesday then over to Townsville?

Great stuff Justin. I was wondering when you were going. Nice write up too. Looks like the great was a great success!

Titty Titty Bang-Bang.... (read exploding boobies) http://www.liveleak.com/view?i=660_1261375701

I missed out. This time I was caught up in Cooroy....

Oh and McFly.... Call me big boy ;-)

For those of you who dig the ginge... And then there is this old busted arsed hat of smashed crabs.... I'm just sayin

For those of you who dig the ginge...

So can you use the S13 crossmember to bolt an SR20 into a 32?

Just read your post. Sorry to hear it bozman

Can probably borrow my mates one. It's up at Sandstone point though. Get fired for being a boozy karnt last night?

The car is coming along nicely!

By 'Sell the works' you mean your man junk?? Yes, yes they is.

McFly and John, this is for you. Redhead, boobies and Zombies. So that would be Redzomboobies.

Do eeeeet.

So, um, yeah...