YO880

Thanks Dan, I have no idea how to leave a trader feedback, But thanks for the easy transaction.. Cover is great!

PM'd

yeah sorry, not sure what happened.. i just sent you through a test one again and it seemed fine.. maybe a glitch on my end.. thanks

no worries mate.. i tried to PM you, but it said you cou;dn't accept PMs.. it was on the PS pump anyway

pm'd

A Mate of mine needs a pair of C210 front struts after a slight mishap, anyone got any leads on a set? Sydney would be awesome, but guessing need to look a little further a field. Thanks Guys

Thanks Guys, i will go with these! appreciate it

Nobody ? from general research i can't find any definitive answers, do the following sound safe? Water Temp - 90' Oil Temp - 115' or 130'? Oil pressure - this one seems hard to find, low pressure warning should be around 20PSI?

Hi Guys, I am having some custom gauges made up to suit an R33 RB26DETT engine, I want to get Yellow and Red permanent warning marks put on the gauges to match the style of the existing gauges. I am not quite sure where i would find this information, so putting it out there for the common consensus! What would be consistent Warning and Danger levels for the following sensors: Water Temperature (degrees Celsius) Oil Temperature (degrees Celsius) Oil Pressure (PSI) Thanks guys, appreciate the feedback

Thanks, i appreciate you taking the time and posting the Pic, will try and guesstimate it off the car over the weekend then

Hi Guys, Does anyone know if Power steering reservoirs and hoses to the pump are generally interchangeable? I am looking for a Power steering reservoir to match an R33 RB26DETT pump.. I don't have any standard mountings in the car at the moment, so if possible i would prefer to get a nicer looking steering reservoir (like the 350Z one perhaps?), the R33 one is kind of ugly Could i get an R34 GTR or a 350/370Z reservoir and hoses and fit them straight to the R33 GTR pump? Thanks guys

Thanks mate, will do! If you have them handy, can you tell me if the R32/R33 and R34 hoses are that much different? are they different bends, or just lengths or something?

Hi Guys, Does anyone have an old RB26 top radiator hose (probably R32/R33) they no longer need? just looking for a very cheap 2nd hand one to check it fits before buying a silicon kit (the RB26 is going into an old skyline). Prefer pickup either around central Sydney or around Hills area on the weekend, but will take a posted one if its all i can get Thanks guys! Kent

R32 RB26DETT engine with forged CP pistons and ARP stud kit- professionally built by the previous owner, water pump, timing belt etc. were replaced at the time. Polished cam covers, painted blue centre cover, clear front covers. comes with twin turbo's, throttle bodies, intake manifold, wiring loom, standard computer, coil packs, CAS (though not shown in the photo), knock sensors etc. Also comes with 2x AFM's, comes with modified front aluminimum sump for RWD RB25DET 5 speed gearbox with RB26DETT gear set and short shift kit Nismo RB26DETT single plate clutch and nismo lightened flywheel brand new nissan gearbox/engine mount bolts what's missing a couple of bolts (ie. cas mount bolts, ignitor bolts, knock sensor bolts, flywheel bolts) the Air intake temperature and water temp sensor (cheap enough new) Injector dropping resistor should drop right into a GTST (previous owner had it fitted to a VL commodore, and ran it for 6 months after building it) the photos attached are of the engine, will get photo's of the gearbox etc. on the weekend (but it looks like a gearbox ). Engine is currently on an engine stand, which will go with the engine $5500 pickup only from the hills district (gearbox alone is worth $1500), will not split..

bump, before it gets listed on ebay