E-HCR32
-
Posts
29 -
Joined
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by E-HCR32
-
-
I'm not really after rubbers, just the rims, but may as well see what you're after for them?
-
Bump
Still looking for a pair or full set of OEM R32GTR wheels
-
Southside, 4173.
-
.... no offer.
-
I'm still looking for a pair of GTR rims in good condition, I'll also consider your full sets depending on damage, I dont need any tyres sorry.
-
bump still looking to buy stock r32 gtr wheels any condition considered...
-
...do you know by any chance where said valve might be located?
-
Ok, that makes sense, thanks Ben.
-
Hello friends, as my R32gtst is getting older it is having trouble with it's wee wee. The poor old thing is dribbling from the rear windscreen washer as she comes on boost....
While not a major issue it is starting to become annoying to refill the reservoir weekly, it usually runs out when I need it the most. Does anyone have an idea what could have broken? I understand there is a check-valve somewhere in the plumbing between the washer pump and the nozzle, but can not understand how this could be the problem as it would only stop the fluid from running back into the reservoir...?
Any help would be appreciated.
-
Between $500 and 1500 depending on condition
-
Bump, still looking for two decent condition stock R32 GTR wheels.
-
Bump, still looking for two wheels in good original condition.
-
Bump, still looking....
-
38 minutes ago, GTSBoy said:
Hmmm. Hydrophilic.
Hydraulic. They were just red top NICS RB20s.
Hmmm the joys of predictive txt.
I just finished reading an article by John Bowe on the GTS-R, he states they reved to 8K so must have been hydraulic.
-
On 7/24/2019 at 3:06 PM, djr81 said:
Yes. It was used in the R31 GTS-R.
Won at Winton in 1989, Amaroo and Winton again in 1990.
Won the Sandown 500 in 1989.
Won a championship for Jim RIchards in 1990 along with the R32.
Be proud of your RB20. No RB25 ever won a Group A race.
Ouch for the boat owners, do you know if those racing RB20s had solid or hydrophilic lifters? I would love to be able to rev my RB20 out to 10K
-
Bump...
Thanks for the PM's guys, but would only consider Australian offers.
-
57 minutes ago, 7amooda.007 said:
Just bought me a r34 gtt, owner uses Fuchs 20w50 dino here (whaaat) however, pressure and temps are all fine, never exceeds 110c picture is attached.
So might change to 15w50 fully synthetic or whatever synthetic, whats the thought?
Location: Deserts of the Middle East
Around 350-400hp
OMG fuchs just bought out NULON AUSSIES should only buy Penrite...pass it on f*kc the germans!!!!!!!!!!!11
-
Bump!
-
It is gutless before boost, and that's why people replace them with 2.5s or 3.0L
did the 20det win any aussie group a races?
-
Looking for stock R32 rims, singles, pairs and full sets, tell what you have got.
Cheers Graham.
-
Hello Stao,
Regarding the RB20 SS1.5 Hiflow, just so I have all the figures correct....
You're saying the compressor exducer is 67mm and the inducer is about 50mm?
While the turbine exducer is 63mm and the inducer is 58mm?
What would be the turbine housings A/R .46?
Regards, Graham.
-
Hello Stao,
Some specs on the SS1.5 Hiflow R32 would be appreciated, that tiny rear housing looks raped.
-
Make sure you measure and email just jap to double check the size before you order.
-
either go to a wreckers and get plugs from a r32 engine loom or use the plugs from your old sensors on new r32 O2 sensors, your can buy adapters from here...
http://justjap.com/index.php/sri-oxygen-sensor-dump-pipe-adapter-sr20-rb26.html
BNR32 Stock Wheels
in Wanted to Buy
Posted
That's a great price, you will have worries selling them. If only you were located in Brisbane. thanks for you response Mat.
Cheers Graham.