Jump to content
SAU Community

roolis

Members
  • Posts

    24
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by roolis

  1. its the same,there were no DE or DET mafs,only different specs.like Green label is S1,Pink label is S2 and so on
  2. yes,still no squiters,i will install them only in a moment if i have to strip all engine out
  3. Rb25de from 25det main difference is CR,if you change pistons,you will have det,except no oil squiters,head is 100%same,rods also the same,did the same for my DE,but i put det pistobs with rb26 rods,cause they are stronger,i am pushing 500hp on my setup,with Tonei cams,N1 oil pump,and be sure to install crank collar if you will dismantle your engine.I pushed 350hp with 1bar boost with stock DE,untill 2nd cylinder ringland failed,so its up to you,if you go over that,you need upgrades
  4. whats the difference if its auto or manual,you only need Turbo ECU thats ment for auto
  5. i have manual for R33.So i just need to make plug mirror type,but why in some places is written about triggers pins changing places?what is that for?
  6. hello guys,who has 100% answer,not the internet search one,about repining of CAS.I need to repin R33 Mitsubishi Cas to R34 Neo Hitachi Cas,i found several answers,so which one is the correct one?Most common answers are that R34 Hitachi Cas plug is the mirror type of Mitsubishi one,is it prooven?Alot guys write,that some CAS'es need trigger wires switched,while power and ground are same,can somebody confirm one or another?
  7. bought it and took it apart,so thats what we have its defo Nismo lsd,it was set to 2 way,so i will change it to 1.5 way just one difference,no lock adjustment bolt as in topic that i have shared before
  8. after more searching,i found this https://my350z.com/forum/engine-drivetrain-and-forced-induction-diy/412098-nismo-diff-home-install-pics.html and it looks realy same,as for a lot of googling,only Nismo ones have like fabric welding on the end of lsd,where you see such dark line,othe machined ones are shiny all the way,like Kaaz If its exactly the one,then its very good for me,cause i even want to make it 1.5 with medium lock
  9. Just got offered R200 diff,i know that its 4.08 ratio diff,it came from S14,but seller cant tell what brand is that 2 way LSD,anybody can tell what brand it is?by Google it looks close to Nismo,but not sure,thats all the pictures i got:
  10. why to post if you dont have any advice in this case?
  11. tell me at least one good reason why it had to?usually engines blow up because of lean a/r,too much boost and detonation held for too long,how can such ecu effect blow off?its only richer fuel map,boost and fuel cut eliminated. Ok,end of story,i got nothing here,but few guys contacted me on other forum and they shared their experience with that ecu,even one of them asked me to inform,when i will replace it with standalone,so he can buy it from me,good luck,dont blow your engines,while playing NFSU
  12. personaly you,how many cars you have boosted?i think none,just sitting to laptop and talking how to live,i deserve that car more than you for sure,cause normal guys told me good advices,so i dont see any point of beeing in this forum,cause i am good in cars,just started this topic to get some experience with exact ecu,not to ask your permision to live,even by that,i wont tell full results of Dyno,that was made this morning and by the way,it went much better,than i expected and i already got answer from Blitz,what that Ecu is made for,so leave your bullshit to yourself,cause all your advices without experience are worseless,go and do something in garaze,not in your chear by the pc,PEACE
  13. So you call all these profesional guys that installed this gauge stupid? Interesting, you even dont know how they are good and you talk like this.Gauge is set correct way, i am 100% sure, they know their job.You should know, that in drift,guys run fuel maps at least 11 a/f ratio, to avoid detonation, and our a/r is around 11.5/12 on fool load, I am really sure that its not too rich, we run our other cars same way with standalone, other thing, when you use car only as a daily. Pinging, I dont know that word, can you explain?
  14. i dont think that its a noob question to ask if somebody had any experience with such ecu,to share experience.Detonation gauge we use is from pro race,a lot of guys in my country use it in profesional sport,so i trust it 100%.With rich fuel,i mean,that we already see,that fuel map in this ecu is set for more fuel,so basicly its always good in hard driving to be in safe A/F ratio
  15. what you mean?the car was runing very good,he has all wideband stuff and gauges in the car,so we see,that A/F ratio is very good,its even more rich,than with stock ecu,what is good and safe,detonation gauge shows no signs of detonation,we are not noobies in the cars,so dont think that we are doing everything blind
  16. gave this ecu to my other friend,who has R32,but with R33 GTST engine and harness,we have driven a bit and he told,that he feels a big difference,than stock ecu,he has big FMIC,3" exhaust,a bit bigger turbo than stock with 1 bar boost,Pink AFM,cold intake,Walbro fuel pump,almpst everything,what Blitz states has to be added for that ecu,we will try to go on a Dyno day,which is every saturday,so we can check what is what
  17. thats what i did today,was making topic yesterday,thinking,that somebody have exactly same ecu and can share info.Ofcourse my tuner said that standalone is the best,but he said also that its a good start with that ecu aswell,cause my funds wont let me standalone right now and i got this ecu for free
  18. When wise people dont have what to tell,they just dont speak,i think you are not one of them. Already found some info,that with this ecu car runs around 350-400hp,so it means that i need to throw it away?i dont think so
  19. Hello,my friend gave me Blitz Access PC-23710T ecu from R33 Gtst RB25det 1995,maby somebody know its specs,what is remaped,what modes i have to make to use it?thanks
  20. didnt want to make new topic,so will ask here: i have R33 GTST cluster in my R33 GTS,but it will be boosted,so i want to make stock boost gauge to work,so where stock boost gauge gets signal from?where is the sensor on GTST?thanks P.s i know that somebody will say get aftermarket boost gauge,but i want this to work
  21. ok,so it seems,that my friends ecu is from R33 RB25DET,so it would fit me very well and it would be good untill i go with standalone,just have one question-i know that its plug and play,but do i need to hook up missing wires,like boost control solenoid and other one,that i dont remember,can somebody clear me for this?what exact wires are missing?cause i think that i will go with standart DET turbo for now,so it will be installed as it was on det,so i want to connect boost solenoid aswell,i cant see what else is missing in my loom,cause i dont have NA ecu pinouts,just DET.thanks
  22. hey man,can you share R33 RB25DE non turbo ecu pinout sheet?
  23. manifold i can use or not,thats the option,cause i have it lieing in my garage aswell,my frien had it,big FMIC i mean too hard maby,its 2.5"connections,75mm fat,550mmx300mm core,so its middle big FMIC,its really not too big,i use such one for other NA boosting,just said big,depending on how small is stock ones.So if we dont look at all mechanic stuff,still my question is,can i control fueling with DE ecu and Blue emanage?maby somebody done it?i know that standalone is the best,but for now,its stupid for me to waist money on Nistune or other stock ecus,then i will have to put it for sale,cause i am 100% sure,that i will make standalone,just thought,that i can use for begining what i have,we used Blue emanage on NA boosted Honda before,it was NA Vtec,so it was runing very well with it,even,that Greddy emanage blue has Vtec control,so we could control it aswell,but dont have experience with RB's att all.My friend has RB25DET ecu,but its from R32,so it doesnt have VCT control.
  24. hello all,i have owned R33 RB25DE,so for sure i am going to boost it,i know how to do it and have experience with boosted NA,but its my first time with RB's,all mechanical stuff for me are clear,but need an advice for engine management choise.I have Greddy emanage blue with Greddy boost sensor on my table,does anybody have some experience with it on RB25?should i use it with DE ecu or do i have to get DET ecu anyway?ofcourse i am going for stock boost on high compresion,big FMIC,custom 2.5" intercooler piping,t3/t4 turbo,greddy intake manifold,440cc injectors(how stock ECU reacts to bigger injectors?should i get DET injectors instead?).So again,what are my best options for the moment what i have?i will have standalone in near future,but want to start it with what i have,thanks in advance for anything
×
×
  • Create New...