020king

Thanks for the help. This piece of kit is a all in one which is good. Better than having gauges everywhere.

Thanks for the help this scan tool will be very helpful

Thanks alot for the help and info

Noobie here. Will rota grid's 18x8.5 et 35 front and 18x9.5 et35/30 fit r33 gtst. Without modifying the arches. And whats the recommended tyre sizes. I was thinking 225/40 front and 245/40 rears? Any help is appreciated thanks

Thanks nice good bit of info to know

Thanks for your input. Any recommendations for aftermarket water temp gauges?

Why do soo many people hate on the hks mushroom intake? I understand in hot temps it ain't gonna be good but here in uk we rarely get hot summers and if at most 2 months of summer. I also hardly drive the car it's a weekend toy have put 1k miles on in 1 year. I get that the mushroom filter can disintegrate but surely if you change it every year it shouldn't? But Yh il look to see if it drops any further /gets worse, then start looking at replacing thermostat

Thanks for the reply. It's winter here the temperature dropped to - 3c couple weeks ago. Now it's been around 5 to 7c. Could that be the reason? Could the air intake be sucking in cold air and cooling the engine? I do have an hks mushroom intake without any sort of box around it.

Thanks for the reply. Yes the fan is running good.

Thanks for the reply. I will get it checked out before I replace the thermostat

Thanks for the reply. It has always been dead in the middle. Just recently started dropping towards the cold side when I drive fast over 40mph. When at idle it will come back up to almost the middle. I will get a proper water temp gauge and see what that reads.

Hi everyone, was hoping someone could help with a problem my r33 gtst has developed. When driving the car above 40mph the water temp needle starts dropping slightly just below the middle level and would stay there untill idle. When the car is idle the needle is near enough to the middle. When it's cold weather the needle will once again stay below the middle level. Could this be the thermostat? How do I check it? Any help is appreciated. Thanks

I'm in the UK so it's perfectly legal without cover but I do plan on making a heat shield around it

Tbh it feels abit more quicker like torque wise. I left the standard snorkel on to act as a little shield and I plan on making a proper heat shield around it.

Thanks everyone for the advice. I couldn't get to 2 of the bolts as those gold bolts can only be removed from the opposite side. I was scared of applying too much pressure on the hose and tearing it so in the end I decided to get 2 big flat head screw drivers and pry away and it came off easy. After that it was all good and its now on the car. The car sounds amazing can hear the turbo spool up loud like a jet. ???