NeoCef

Hey man do you have the fuel gauge calibration values, going through this stuff now but not sure where to go with it

Yeah i have actually got one, it shows a code for knock sensor because i havnt got the plugs for them. Would that stop it from starting up?

Looks like theres no burnt tracks or anything.

Yeah well thats where im really stumped on this, i have checked continuity from injectors to ecu and thats allgood but when i spin the CAS by hand only the coils fire. Ive tested the signals from the CAS for the 1 and 120 degree signals and confirmed that is working correctly and even tested it at the actual pins on the ECU as well. The fuel pump is priming and i have checked that the lines are the right way round.

Yep using all the neo loom and ecu. Got a 12v ign feed to the injectors and have the original CAS but also have 2 others to test with as well. My cef was auto but been converted and have got the neutral relay bridged.

Hey guys, so i am putting a rb25det neo into my cefiro but have run into problems with the wiring and not starting. I have checked all the wiring and powers and earths multiple times but cannot seem to find anything wrong. I seem to have spark from the coils fine but for some reason the injectors do not pulse at all. I have checked with another set of injectors but still no pulse. There doesnt seem to be any error codes either. I have also tested the signals from the CAS and confirmed that it is working correctly and tested continuity to the ecu. Is there something i am missing that could stop it from starting up? I also have a spare ECU from a neo stagea as well that also does the exact same things.