Jump to content
SAU Community

Jack_Dubz

Members
  • Posts

    11
  • Joined

  • Last visited

  • Feedback

    0%

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Jack_Dubz's Achievements

Apprentice

Apprentice (3/14)

  • Dedicated Rare
  • Collaborator
  • First Post
  • Conversation Starter
  • Week One Done

Recent Badges

0

Reputation

  1. How long did postage take? I just ordered one from Amayama.
  2. Where did you get a new bung? Had a quick look on google and couldn't find anything.
  3. I'm about to check the bung now. With the smoke it only happens when I take it for a drive, I've let it idle for ten minutes before and no smoke.
  4. So I have a 1998 R34 Sedan Auto RB25DE, I just recently changed the coolant. I unscrewed the bung from the side of the block as well as the bung on the underside of the radiator. Drained all the coolant and screwed the bungs back on. Filled up the coolant, but it didn't take the required 9.4 litres of coolant. So I've been running the engine until operating temp and then shutting it down until it cools, and then I pour more coolant in. And just today I took it for a short 10min drive and when I got back there was white smoke coming from the left side of the block near the coolant bung. Any ideas? Thanks.
  5. Thank you very much for the insight. I'll try a few wreckers, if no luck then I'll look on ebay for a small pair. Thanks again.
  6. What size tweeter could I buy to replace the factory one?
  7. It sits next to the brown one. Well the speedo doesn't work, but I don't think that is the cause.
  8. Hi, the speedo in my R34 4 door doesn't work, I have replaced the cluster and did a self diagnostic check to see of the needle still moves and yes it does still move. Could it be wiring issue or the speed sensor itself. If it is the sensor itself do I need to drop the transmission to fix it? Kind regards Jack.
  9. Is there meant to be a relay plugged into this? This is a 1998 R34 4 door, non turbo, automatic.
×
×
  • Create New...