woolls

It can be a hand full Roy, but its not too bad once tyres come up to temp Not too worried if it doesn't sell

offers around 40k

Times have changed and my pride and joy has to go. Will look at offers around the 40k mark.(gearbox, brakes and tail shaft cost me that) 98 40th annerversary model, 25/30 combo. 500rwkw, 6 speed sequential holinger gear box(bought new). ap racing brakes, haltec computer, racepak smart wire, racepak logger dash. Cams logbook Has been racing in the tas super series, sports GTA Had this car for the past 11 years. Used to be my daily driver Serious enquiries only, no test drives. Would only swap for a 20 tonn excavator to equal value or + cash my way, NOTHING ELSE More than happy to help out with a mainland buyer

Chasing a Series 2 R33 Gtst Rear cradle and rear hubs. Don't need diff or control arms, but would look at a complete rear end if the price is rite. South of the state cheer

I am after a R33 Rear bumper for a series 2. I would need it sent to Tassie. Has to be in good nick, Silver would be great, but not important. cheers

Wanted- R33 series 2 rear bumper.

This is good news Jack.

Glad to hear you finally got motor back.

Have both Jack, best of both worlds

NO, DON"T DO IT

Need a front left guard and passenger side door for series 2 R33 Gtst. Must me straight, no bog or rust.

The one that had its roof cut off. I am After a couple of parts.

I use Powerplus E85. I never used to run 98 through the pumps and injectors, but will do from now on. 4 of my ID2000 died from sitting around and i suspect it was E85 that killed them.

Front Brakes are sold.

sent you a PM Jack.

$900 and a carton of jim beam cans for the fronts.

G4 356mm front brake kit. Rotors have only done 20 laps of baskie. Complete kit, will bolt straight onto the front of an R33 Gtst. pads about 40% . $1000 firm Pair of new rear rotors to suit a R33 Gtst. Fitted to car, but never used. they did have a gold centre, but now painted black. They are the DBA HD series. DBA 4908XS $200 Set of Gravity Gullflame rims 5x114.3 in pearl white 2 18x 9.5 +25 2 18x8.5 +25 with RE55 semies, rear tyres 245x40 fronts 225x40. plenty of life left in the front tyres, some fun on the rears. $1000 neg located south of the state.

Hope to make the Nov meet Damo, but not too worried if I dont. In that thread, I just followed your drawing.

http://www.skylinesaustralia.com/forums/topic/324683-wiring-up-a-cams-approved-batt-isolator/page__pid__5291517#entry5291517

I had the same trouble with one of my strut tops, it already had 2 stripped nuts. i just used a Nut & Bolt Grip Extractor. You should be able to pick a set up from bursons, repco etc.

Sent you an email Brad

+ 1 for Boost Automotive

yes, .65 gap fixed it.

I am running Splitfires, makes 440kw running 23psi, had the plugs set at .8, but had to close the gap to .65. So I need to upgrade