humz

Righto, thanks for that. So you think there will be a significant pressure difference in the head? What can this result in? Oil starvation to rear of head/cams?

From my readings it is recommended to block off the middle and restrict the rear orifice on a rb25/30 using vct. Now what would happen if you blocked the rear and restricted the middle??? brief specs are as follows standard oil pump 1.5mm restriction (in middle) crank case breather on intake side of sump above oil pick up from my understanding as the front only feeds the vct module, by blocking the rear wouldnt that give better oil distribution and balance in the head??? How many orifices does the rb26 have and where are they located in comparison to the rb25 block. ive read they have one blocked off standard so im assuming they have 2, and for better balance the middle would be blocked- makes sense

It's geting late?? It's 4.30 am here and I'm still reading the oil thread and other information and about to go crazy. Head is at machine shop waiting for the green light from me, I ordered the oil Drain but realise I may not need it and will probably go for the sump vent set up... AHH f**k need to sleep, will respond to your post when i awaken. Thanks for your answers mate, much appreciated

Thanks for whoring out my post guys lol How bout we get back on track with some answers to the questions I posted (please) instead of raising more questions which need answers and more questions creating a domino effect where my domino is used like a bitch and has all the other pieces stacked up ontop of it.. Just sayin

Hi guys having some issues with excessive oil shooting into the head and subsequently filling up the catch can and pissing all over the engine when it's under load. When backing off aftet load it also shoots out a large rich ( orange ) flame and a few seconds later massive amounts of smoke ( that isn't black ) I have stripped the head off and suspicions come true as no oil restriction was used and there is no oil return from the back of the head. I have sent the head off to have it checked for peace of mind and valve seals replaced if need be. Heres the questions - I will be fitting a spool fitting to the rear of the head and returning it to the sump, I will also be returning the catch can to the sump. T'ing into the turbo lines is out of the question so I was wondering if I would need to weld separate fittings on the sump for the can and head return or can i simply T them up into the sump via a single (or double ended) fitting taking into mind the head will return a lot more oil than the can (hopefully) will this differnce be problematic? -also can the large flame and subsequent smoke be a direct result of this excess oil in the head which is making it's way past the seals when it is under load?

solid lifters on neo, no shit. so neo head is much more superior than non neo head? whats pros and cons with neo head vs non neo??

thanks guys im definately gona look into the infinty TB once my cars up and running. sounds like a very viable option.. thanks again guys im reading the page now

imagine they werent insured theyd be fuct just about as hard as the damage to the rear of that gtr

my questions werent really answered im using xf tb coz im using a subzero plenum which is set up for that tb. and all my pipe works already done in 3" and its all perfect, i cant go back from here only forward.. so do you guys have answers or only criticism? i have searched far and wide and have a rough idea but dont have definate answers for my questions.

can someone help answer this i wona buy a ts asap

im using an xf throttle body on a subzero plenum in a rb25/30. PROBLEM:i need to wire up the tps and am having some trouble i have been doin some research on how this will work but can some please make this crystal for me. these are the questions i need answered 1- is the rb30 tps the easiest way to make the xf tb work with rb25?? if not what is?? 2- does the slot in the rb30 tps fit straight into xf tb??? because the rb25 tps definately will not. 3- does the rb30 tps have the exact same plug as the corresponding end of the rb25 series 2 harness?? ie will the rb30 tps clip straight into the rb25 harness??? if this can be clarified that would be very appreciated

fiddy wont even cover fuel shoulda named it a charity run lol

just a skyline cruise wats the go?

whats the rears look like