JiN_MaN

I have some 700cc SARD (will have to double check brand) injectors I was using on my R34 Neo engine with SARD rail.

You drive the car in and out of the ID so clutch is no problem. You cant see the adaptors unless you put your head under the car and look up behind the wheel so cant see that being a problem, at least mask up around and paint them black. BMS is only 2/3 bolts, might as well remove it. SAFC as Ben said you could hide, just push up behind glove box, or it will just be wired in next to the ecu and it only 3 wires so can remove and drive gently. They are picky about wheels/tyres. Technically its within the track allowance, but im sure somebody would have some stockies you can borrow. Ive got some wheels I use for Id checks/regency but they have different size tyres front to rear. Welcome to borrow if you want to change tyres.

Yeah I had a handfuls of pages open and I think I just made an assumption in my head that the car you were looking at was the car I had open on the next page. I have no idea how/why I did this, leave me along its been a long day. Post of up mods of the car your looking at. Most stuff will get through an ID check if they have no reason to look.

Turbos will be fine, as long as they are in the garret housing. If they dont have a reason to check ID tags on turbos then they wont. Does it have braided lines? or nismo/adjustable actuators. Dont put standard ECU in, put the standard ECU cover on the power fc and remove controller. Or buy my engine and exhaust gasket kit for R32 and swap over turbos, but the money you pay to swap turbos off then on again, you might as well just give it a shot with the -7.

Engine: Custom made catch can with oil return - Remove, even if legal and returned into intake INDUCTION Garrett 2860-7 ball bearing turbos - Fine Nismo 800x300x120 intercooler sprayed in black - Fine Fuel system BOSCH 023 in-tank fuel pump -Fine GATES bigger fuel hoses - Fine Nismo 600cc injectors - Fine Engine management APEXi power fc with hand controller - remove hand controller, fit a standard ECU cover on the PFC HKS EVC boost controller - Remove Blitz turbo timer - Remove Exhaust HKS exhaust manifolds - Are they cast? NISMO 3.5 inch exhaust from dump pipe back - Block it up with steel wool and a baffle Suspension&brakes Genuine Bilstein full adjustable coilovers - Remove NISMO strut brace - Fine NISMO adjustable arms - Remove CUSCO brake booster stopper - Might as well remove, its easy and it draws attention INTERIOR NISMO seats - Fine Remove tint if not legal, Clean seat belts with hot water and lubricate, standard-ish wheel, good tyres, check high mount brake light. Does it have a compliance plate fitted?

S13-021683 Please

2004 V35 350GT Nissan Skyline 350GT 6 Speed Manual 97,000kms Black Leather UV Cut Glass 19" ASSM Wheels Dual Climate Control BOSS Stereo System with 6 Stacker CD Player HID Headlights Central Locking Electric Seats All the factory options you would expect. Fantastic to drive and plenty of room for 4 or 5 people. New owner will be very happy, inspections welcome, no money owing and a clear title. Top of the line 350GT model in black leather, 4dr, 6sp manual with BOSS Stereo system. Please call if you have any questions, O4O29O2759. Have a heap more pictures if needed. I would consider a trade for older skyline or silvia, or 2005-2011 Suzuki Swift Automatic, as part payment.

White passengers in Adelaide, cheap

Have a working one in Adelaide $50

Removed from R34 Neo Made 320rwkw Autronic ECU with Haltech 3 Bar Map sensor Loom for R34 Neo engine Plazmaman Race Series Intercooler + pipe work Garret 3076R Turbo Tuneagent Highmount Manifold Turbo Oil/Water braided Lines 3.5" SS Dump and front pipe to suit R34 (you will need to shorten the pipe by 18cm to make it fit an R33) SARD 800cc Injectors SARD Twin entry fuel Rail 4" Intake Pipe with K&N Filter Complete package, only part I have sold is the Greddy Plenum, other than that comes with every part needed to bolt and and make power. All parts are used, but in good condition. $4000

R34 turbo OP6 rear housing. $350

Bumping an old thread, yes king springs do make a lowered set 35mm for $380. Or ebay USA, same 35mm lowered for $180ish delivered. Just for any future reference.

Got a 3" Mild steel front and dump in one piece. $120 delivered.

Nismo 2 way, not in housing $650 delivered from Adelaide

Don't know if its a mom, but I have a boss kit to suit a momo wheel on r34. $50 delivered

Wtb r34 exhaust, front dump and cat. Standard or 3"

I have a R34 4dr roof spoiler, $200 brand new in gel coat. Test fitted and fits 100% perfect. Made by Vanquish Motorsport in Japan.

After a Dorian Lap Timer. Can be either the older bigger style or smaller newer style. Will pay postage if interstate

Have one in Adelaide if thats any help

If your in Adelaide $100

^^^ Inbox is full, but ill grab it if you can post to Adelaide

Possibly the first time Iver ever seen a set of plates that are actually priced well for what they are. Goodluck with the sale, dont think they will last long.

$30 delivered, I think I have a spare

Did you have "Adelaide vehicle inspections" do it?