GTS26DETT

how much tread left on tyres

I will give you $150 for the whole water temp gauge setup, COD to Sydney

I would like to take 2 but needs pics first!

VG30 roller bearing Turbo - good condition with near new dump from turbo to cat $ 900 straight upgrade for RB20DET, produces good power on properly tuned motor. Can provide Dyno graph for a RB20 making 186rwkw with turbo only to serious buyers. TO4 turbo - perfect condition T3 split pulse exhaust housing. Upgrade for RB20, RB25 or RB30. Specs to be provided as well as pictures. $700 R32 GTR Bonnet - $700 R32 GTS-t right hand gaurd - $100 R32 GTS-t front bar - $150 Contactable at [email protected]

R32 GTR Bonnet - $700 R32 GTS-t right hand gaurd - $100 R32 GTS-t front bar - $150 Contactable at [email protected]

TO4 turbo - perfect condition T3 split pulse exhaust housing. Upgrade for RB20, RB25 or RB30. Specs to be provided as well as pictures. $700 Contactable at [email protected]

VG30 roller bearing Turbo - good condition with near new dump from turbo to cat $ 900 straight upgrade for RB20DET, produces good power on properly tuned motor. Can provide Dyno graph for a RB20 making 186rwkw with turbo only to serious buyers. Contactable at [email protected]

GCG do have the nessacary tools to balance BB centre turbos, there is no problem using the 500HP turbo on the RB20..the surge they refer to is where the RB20 head runs out of effeciency and instaed of accepting more air from the turbo spits it back, this can be resolved with a port job and bigger cams. With having said that the 450HP turbo is better suited to the RB20 due to its smaller rear exhaust housing the turbo wouldnt be as laggy

Heres what you do buddy, speak with Mr Soarer and get your stories straight, get a lawyer and deny having raced the soarer, instead this was a situation of confusion...you really needed to get into the lane the soarer was in, you werent racing just needed to get into his lane and make your turnoff and rather than waiting for the soarer you wanted to get in front of the soarer. As long as you didnt wheel spin the most they can do is get you for acceleration, they obviously had no idea how fast you where going....so it should be okay.

Guys I have a VG30DET roller bearing turbo on my motor with a Microtech and sard trigger boost controller holding 13psi, dropping off to 10.5 psi at the top of the rev range - I have maxed out at 183.1 rwkw (248rwhp), you guys should be getting heaps more power from the 2530. I am about to add a T3G garrett the Oz equivalent of the 2530 and expect 230rwkw. I have a dyno graph if any one wants to see it

Coil-Overs Sold, Injectors sold everything else still available, check original post for updated pricing

Thank you to everyone who has posted thus far, I have pm'ed you all back with the specific details you were after..as quoted before I will try and get pics over the weekend and post them on monday

RB20DET - This motor has bore squirters Head fully serviced with new head gasket New water Pump Crank Linished New Bearings and gaskets HKS 264 cams Adjustable cam gears GTR 444cc Injectors VG30DET roller Bearing turbo Microtech MTX12 with Microtech Dash, wiring harness and upgraded to laptop configurable. RB20 Gearbox $3500. ***$2800*** Can sell the motor in standard form with wiring harness minus ECU, with VG30DET turbo and gearbox for $1800. ***$1500*** Will seperate Parts HKS 264 Cams with adjustable cam gears $1100 T4/T3 Turbo $1500 needs external gate ***$1300*** GTR 444cc injectors $300 ***sold*** can get more Microtech MTX 12 with Dash, wiring harness $1200 ***$1100*** RB20 Gearbox $600 ***$500*** RB20 standard motor with, VG30DET roller bearing turbo and wiring harness, minus ECU $1100 Coil over suspension setup for R32 GTS-t $550 ***sold*** RB30 block good for a RB30DET hybrid Build $80 Big Front mount GTR style intercooler with some silicon piping $800 ***$600*** Standard R32 GTS-t interior Front and Rear seats with seat rails $400 ***300*** Fibre Glass R32 GTR front bar $200 New DBA slotted front rotors - never used $400 ***sold*** cna get more 3 1/2 inch dump for RB20DET motor or RB20DET motor with VG30DET turbo new $350 ***$300*** All prices are open to offers, only reasable offers - Pics available on request by email . Pics only available as of 30 JUne..everything must be sold other items to be added at a later date.

I have a Coil-Over suspension kit for a R32 GTS-t which consists of KYB Coil-Overs Front and Rear = 1 full set Bilstein Coil-Overs Rear. Just removed from vehicle the KYB rears need rebuilbing and where replaced by the Bilstein Rear Coil-Overs about 1000km ago, the setup is great and will greatly inprove the handling of your skyline. The rears can be rebuilt by Kellyville Shock shop for $80-$110 each. Bilstein where bought new at $900 the pair $700onco

Gentlemen, I can get all Initial D series on DVD which includes DVD 1 - 3 of Stage 1, DVD 1 - 3 of Stage 2, Stage 3 which is the movie (1 DVD), Extra Stage (1 DVD) this is the one with the 2 girls who own the sil eighty, and finally Battle Stage (1 DVD) which is all the best street battles from the series. Each DVD costs $29.95 but I am sure if you take the full kit I could do a special price.