Shoudi

Hey guys as mentioned need a wiring diagram or just a quick idea of wiring involved for the horn on a R33 from the steering wheel to the horn itself. Thanks

Making custom C-West R34 Front for 33, wide guards front and wide GTR rear, C-West hood, Jun skirts and TS rear. Good place for kits is Hybrid Customs also good for CF work.

Hey guys, Doing a build up of an R33 25det blah da blah. One day all the electrics were working and then the next they are not. All fuses are fine, grounds etc..... just when i go to start it the exhaust gas light comes on? Fuel is also going the correct way and all the rest completely stumped.......any ideas? *scratching head*

Ok so i had another look at the starter motor and measured and noticed that it under shoots the flywheel? i pulled it apart and tried to see if i can put some spacers in but doesn't look like much room. I'm thinking is has shit itself as the shaft in the middle and the kicker on it has heaps of play and slides up but falls back down so it doesn't appear to be anyway for it to hold itself in line with the flywheel, or am i missing something? *another head scratching moment* all help is muchly appreciated.....

okie dokie after much double and triple checking and some aggravation it was a busted fuse....... however now that we have power the starter motor isn't quite kicking it over. Pulled it of the gbox and it worked fine whacked it back on and it doesn't even sound like it is cranking properly. More of a grinding noise as if it isn't turning the flywheel. thinking drive train? Well i pulled the gbox of had a gander everything appeared to be fine and then whacked it back on and lo and behold it still don't work. Same grinding noise. I checked the fork lever and noticed there is little play when all is connected but plenty when the gbox is off? this standard for 33's? Also apart from the grinding noise once you release the key back to on power quits for a second or something and start up procedure starts all over again..........dash light's, fuel pump whirring, abs etc......... Also i checked and re-checked fuel etc....and that is definitely going the right way. stumped again....... *scratching head*

I just put a 2nd hand rb25det and gbox in my 33. Power worked everything was fine and then i pressed the immobilizer went to start it and it kicked over for a second and power died instantly. At first i though it was the immobilizer but it isn't. Checked all fuses, connections etc... and i am now majorly stumped..... All help will be greatly appreciated.

Does anyone know whether you can get aftermarket coilpack covers for an R33? Been searchen the net for a few hours and cant find anything. Antbody have one aswell?

Nah i dont have my HR licence. Ill try the coles supply chain and see what happens

wouldnt mind something in the transport industry or still to do with cars. ATM anything goen???? also got to find a new place to live so im getten kinda desperate

Looken for some night shift work to make some extra cash to build my car. Anyone knows of any casual jobs available would be greatly appreciated Tim

Hey guys ive connected my headlights up ane checked all the fuses and bulbs and connections but for some reason they dont work. I dont get parkers or hbeams..... Anyone got any ideas?????

hey bro just screw 2 screws on each end of the front bar and rear bar where factory holes are and screw on the ends of the side skirts are and use sickaflex

hey guys I got some series 1 head lights tail lights bootlid with seires 2 wing F/R guard with indicator and badge L/H/ Skirt R/Bar middle section Cheers Shoudi

Have some parts guys and cheap R33 S2 rear wing and bootlid with tailight $300 R33 flush sitting fibreglass bootlid $300 Walbro 602 Fuel Pump $280 Sparco Siena Seat incl SPARCO Rails$500 Sparco Harness 4pt 3" boltdown $100 F/R Guard $150 Headlights $100 ea Taillights $150 ea Rear Calipers and pads $150 txt 0430206279 if interested cheers

series 1