Cash31

I'm after prices for those little trianglish vents next to the A-pillar, both sides, the coin tray/fuse box cover, and cup tray (as above). Cheers, Cash

Pending price, and exactly how much "style" will be added, I'll probably be interested too. Cash

The projector headlights have completely clear glass, whereas the square type ones have tempered glass as seen above. I could imagine they would fit but they'd look weird and be useless at night. Cash

In an attempt to eliminate the all too frequent "What kit is this?" "What kits are available?" etc. I have compiled an archive of all the kits I know of. Feel free to add any I have missed out and help me on the ones I can't complete. Please sticky... Autech Front Rear BN Sports Front Rear Diana Front Rear East Bear Front Rear Final Konnexion Front Rear Origin Front Rear Uras Front Rear Wonder Front Rear If I am missing any or you can help fill in the gaps please feel free to add them. Cash

A31 ABS unit is the same as SR20 S13 ones. Part Number: 47600-71L00 Cash

Thanks for your replies guys. This item is no longer needed as I found it is the same as S13 SR20 item. Cash

Yes it was. A friend was/is doing a ground up S13 build and has done all research on master cylinders. Link to the the blog: Sillbeer Cash

Anyone?

The BMC in my A31 is a BM50, but it is the 2 port version as it has ABS. The biggest 3 port BMC in Nissan Australia's database is the BM50 (1"), as found on R32 GT-R N1's. These are the part numbers: (5) #46010-05U01 | *RB26DETT.GT-R.17 | Tokico 1" N1 Specification (6) #46010-05U21 | *RB26DETT.GT-R.17 | Nabco 1" N1 Specification They retail for around $530 brand new, and you'd be lucky to find a second hand one. Cash

Im after the ABS unit that resides in the engine bay, the one that has all the brake lines coming in and out of it. Cash

In the non-projector ones, the main headlight globe (lo and hi beams) is an H4 globe, In the projector headlights they use a H3 globe for the hi beams and a H3C as the lo beams. Cash

You should be able to fit the R33 rear brake set up. I beleive they use a drum set up handbrake with the same drum diameter as the Cefiro one. Im unsure as to whether the S14/S15 rear brakes can be used as I dont know what handbrake set up they use. You can bolt up the twin piston calipers off the R33 if you use the corresponding discs. I have what I believe to be R33 rear hubs, but they wont bolt directly to the Cefiro. They have an extra lug on the backing plate which would need to be ground down in order to mount them. As for whether they have the same number of splines as the Cefiro half shafts, I am yet to find out. Cash

As title states im after the drivers side rear window for an A31, the big one not the little quarter window. Preferrably in perth. PM or Email [email protected] Cheers, Cash

As title states im after the drivers side rear window for an A31, the big one not the little quarter window. Preferrably in perth. PM or Email [email protected] Cheers, Cash

The fine will come to the person who is the registered owner of the car, as obviously the police have no way of knowing if someone else was driving the car at the time. Then, there is a section on the back where you nominate who was actually driving at the time, as far as i know you just need a few simple details plus their licence number. Hope that helps Cash

still have any kits left dude?

or just get a factory manual...

Apparently, my Cefiro has standard s13 suspension front and rear, definately lower than standard but not ridiculously low. Have no problems with the cars ride either.

wondering what colour trim you have. im after the two small vents on wither side near the a pillars and drivers side sun visor, depending what colour trim you have.

tried email and pm but received no reply with either. Interested in uras kit. Shipping to perth? Cheers, Cash

http://www.skylinesaustralia.com/forums/in...howtopic=130189 I believe it was around at some point of time but i think its all sort of been incorporated into this sub-forum. If anyone has any more info though... Cash

Just to update... I talked to my uncles technician, and he immediately knew what was going on. He told me that one of the fuses had blown and thats why the accesory wire was shorting out. Sure enough when i got home i cranked out the multimeter and found a fuse to be blown, replaced that and now all is sweet. Cash

Cheers guys, much appreciated. Cash

I am wanting to remove the whole hicas assembly, in the form of getting rid of anything related to it completely. I would like to know all the parts that will need to be either removed or replaced. Ill be replacing the rear cradle, i understand that the r32 cradle is a direct swap, but is it true that all r32's came out with hicas as well? Will an s13 rear cradle fit? A few things im also unsure of, is there a difference between the front steering racks and power steering pump of the hicas and non hicas models? And will it pose any problems upon removing the hicas ecu? Cheers Cash

Thanks heaps guys. That diagram really pointed me in the right direction. But I'm still struggling to find the accesory wire. The blue one as described in the diagram and on the plug actually has no current when in accesory mode, or at all for that matter. After a few tests with the multimeter I discovered it was earthed, so either its shorting somewhere along the line, or I've been stooged with my accesory wire. I think I may just get the autosparky at work to have a look at it and see if he can pull an accesory wire from somewhere. But much thanks for the help guys