phatlavish

Thanks guys, car is sold.

Thanks guys. Bump!

SOLD 1996 R33 Skyline Gts-t - manual, 250rwkw Hey guys, it's finally time to part ways with my '96 R33 Gts-t. I've owned it for about 4 years now, just upgraded so this has to go! I originally bought it in 2013 with about 112,000 on the clock, now has approx 146,000, rego till end of June 2017. I'm after $11,900. Located at Kogarah in Sydney When i first bought this it came with a high-flowed R34 OP6 turbo, I wanted something more responsive so I got a brand new Hypergear SS1PU turbo about 6 months later - installed it & got the car retuned. It's always been great to drive, boost comes on early and hard, fullboost (18psi) around 3500-3750rpm in 4th. Dyno graph was a hair under 250rwkw in a stuffy dyno room. Next step would be to slap in some larger injectors + larger fuel pump and run E85 for something closer to 300rwkw Serviced regularly and always taken care with it, it's always been a great reliable car. Handles great, sounds great, it's got lots of induction noise & gear changes sound very noice I've also got a huge pile of receipts and stuff for the car + dyno sheet, spare ECUtalk cable Mod list: Nistuned z32 ECU (tuned by Toshi from SAU) Greddy profec B Electronic boost controller Hypergear SS1PU turbo JJR bellmouth stainless dump/front pipe Ecutalk consult port display (displays RPM, load, fuel economy, various engine/temp sensors + many many more functions) Fujitsubo catback exhaust - twin tip, good sound, not droney 80mm metal turbo intake pipe Z32 AFM with Tomei plug JJR coilpacks Apexi pod filter Blitz return flow FMIC (painted black) Turbosmart recirc BOV Nismo 555cc injectors Nismo intank fuel pump (wired for alternator voltage through a relay) Jim Berry full monty carbotic clutch BC racing br coilovers Front & rear Whiteline adjustable sway bars Whiteline subframe pineapples Nismo front strut brace with master cylinder stopper Nissan rear strut brace Tomei hicas lock bar kit 18" Speedy wheels, Hancook Optimo rubber all round - heaps of tread left Nismo gear knob Boost gauge Genuine Nissan floormats Pioneer headunit with bluetooth, USB, AUX input 12" MTX subwoofer, 6" Response splits up front - both wired to 4-channel amp in the boot Windscreen replaced approx 1 year ago due to stone chip Radiator (reconditioned by NATRAD) & Century battery approx 2 years old The bad: Driver's side window has a small scratch in the tint Tacho usually jumps around (common R33 problem) Small paint chip on front left edge of bumper from when a Taxi nudged me in a parking lot @ 5km/hour Not interested in swaps or lowball offers - if you have 6k to spend look elsewhere PM me if you're interested!

Aw man, that's my old car hey? HCR32M

Your inbox full? can't send PM I've got a full set of machined rotors but I'm after more than beer money for the set

PM sent

Hey. Up for sale i have the following items: Pickup in Sydney or I can freight them Aus-wide 1. Set of 4x Silver's NEOMAX fully height & damper adjustable coilovers from a R33 Gts-t. All are in immaculate condition - $700 ONO 2. 18" RKR wheels & tyres. Fits R33 Skylines well with no spacers required. All in good condition and include the centre caps. All 4x wheels are 18 x 8" +35 offset and include a set of good 235/40/R18 tyres - all have decent tread with approx 70%+ remaining. 2 of the tyres have a little bit of camber wear from lowered suspension - $500

Bump, wheels still for sale

Wheres Beer Baron been all these years? no posts in a long time...

Pm sent. Bump!

Front strut brace sold

PM sent

Bump! Greddy EBC sold

Sent PM yesterday, did you get it? Prices?

1. 17" Enkei RP-01 wheels & tyres - $600 The front wheels are 17x8", rears are 17x9", all are +38 offset. Stud pattern is 5x114.3. Fits great on a R33 (and probably other Skylines) no spacers required The wheels come with a set of Federal SS-595 tyres: 235/45/R17 on the fronts - approx 80% tread left 275/40/R17 on the rears - approx 40% tread left Some minor areas of gutter rash on the wheels - see photos! Pickup available in Sydney or I can send them anywhere in Australia 2. Greddy Profec B Spec-II electronic boost controller kit - $250 All the bits are in great condition, removed from a running car (an R33 Skyline Gts-t, but can be installed in many others) Includes the solenoid, control unit, in-line filter, T-piece, all hoses & wiring for installation 3. Front & Rear Skyline strut braces - $150 for both Aftermarket front & factory rear strut braces to suit R33 Skyline

Could easily stick it in a 3KG Auspost pre-paid satchel - around $12-13

PM sent

Sorry it is sold. Headlights, dump pipe also sold Still have: ECU, catback exhaust, FMIC kit & the timing belt kit

rb25/30 & rb25 gasket kit sold. Headlights sold pending payment

bump bump

Yo, I've got a bunch of parts here taking up space so they're all up for sale. Located in Sydney for pickup or I can post most things PM me or reply here if you're keen on anything 1. Rb25/30 engine (RB25DET twin cam head + RB30 block) removed from a R33 Skyline Gts-t. The engine was running great upon removal and would make a perfect base for a powerful drift or whatever. Compression tested at approx 135-140 PSI on all cylinders The engine will be sold as a long motor (No turbo/exh manifold, injectors/rail, coilpacks, pumps/accessories or wiring loom) but everything else is there. VCT has been retained for this setup Included with the engine is the custom made front facing plenum, the oil filter relocation kit + oil cooler (with braided hoses and Earls fittings), and a set of custom made FMIC piping to suit the front facing plenum. The FMIC piping has Blitz BOV/flange welded in and is also included The engine has a metal head gasket but I have not opened it up to see if any further parts have been added (rods, pistons, etc) Most people upgrade these parts while the engine is apart but I don't know for sure $1600 Ono Pics of the engine before it was pulled from the car + included parts: 2. EMS Stinger 4424 v4 ECU + wiring loom + data cable + boost solenoid & switch. These removed from a different R33 but can be wired into many different vehicles. Good working condition - $650 ono 3. Fujitsubo Giken 3" stainless catback exhaust. Good condition, sounded lavish. Pickup only - Sydney - $300 ono 3a. 3" bellmouth dump/front pipe to suit R32 & R33 Skyline Gts-t. Good condition - $80 4. FMIC & piping kit from a R33 Skyline. Includes all pipes & t-bolt clamps. The pipe off the throttle body best suits highmount turbo setups that don't have room for the standard crossover pipe. Includes a Turbosmart Vee port BOV. Pickup only - Sydney - $300 ono 5. Genuine Greddy timing belt (suits rb20, rb25, rb26) + NSK idler & tensioner bearings + genuine Nissan oil seals. All brand new/unused - $200 ono 6. Genuine Nissan OEM gasket repair kit to suit Rb25DET. Perfect for a complete engine overhaul: head gasket, rocker covers incl. half moons, turbo gaskets, etc, etc. The Nissan part # for the kit is 10101-25U26. All brand new / unused - $300 ono 7. Pair of Series 2 R33 Skyline headlights with HID kit installed. The passenger side light has a broken tab & has had some cracks repaired at the back of it at some point in its life, it still mounts up to the car fine though. Driver's side light has no damage Both lenses are very clear. Includes all wiring & ballasts for the HID kit - plug and play into the car - $400

Sorry guys, all items are sold

Looks like they are sold pending payment. I'll update if it falls through

bump