chuckie

Hi DD i have Blitz kit fitted to S2 Stagea ,you will need to MOD REO but only a small mod ,i had to FOLD 50 mm strip along REO to miss COOLER,i taped the REO marked 50mm on END`S 15mm in middle,then SLOTTED with Hacksaw & the FOLDED it UP,Pic`s here to help, hope this is a HELP cheer`s Chuckie.

As we can get Rotor`s & Pad`s for S2 for UNDER $300 i call that Cheap, you have much more about then most think,you have a PAD that is 157 mm long it`s much the same as have smaller pad`s with extra clamping pressure ,so there about same,S2 brake which every one like`s to BAG`s are ok if you don`t think your in a SKYLINE,cheer`s Chuckie.

search & see REALLY ,GOOD LUCK ONE SPECIAL STAGEA

Hi Scotty,i have S2 stagea, i do 20,000 pre oil change + i have been SAMPLING my oil,WESTRAC here in Perth do sample kit`s at $26. great price as i set up trend & see what is happening with my oil,i change Filter at 10,000, Nissan Filter aswell,there is some detail`s on my OIL SAMPLING,+ if you go with relocation filter you can Move it so it will be easyer to remove ,good luck Cheer`s Chuckie.

Hi, Will help if you tell us SERIES 1 OR 2 , cheer`s Chuckie.

RAIN X only on OUTSIDE ,ANTI FOG for INSIDE ,so good luck cheer`s Chuckie.

G`day Scott,ANTI FOG made be RAIN X ,is a great Product so try see ifthat will sort your WORRIES OUT ,also what do you clear inside with look at what may as cause your worries,,GOOD LUCK, cheer`s Chuckie.

Why not a K&N i have no problem`s ,i have had mine in for 80,000 kms,still going well.good luck,cheer`s Chuckie

Hi All ,Tank size`s are different & top fixing point`s are different to so you will have to do some work ,i will get detail`s this week so if your happy to WAIT then i shall post as soon as i have info ok,cheer`s Chuckie.

Hi Dave ,We did find TOP TANK ,but no bottom tank ,as it`s TOPTANK that give`s up first ,i have talked to my Rad man this morning i shall meet him in week & get all DETAIL`S again & POST THEM UP ok ,but i know that the one we found was 25mm thick so that will be much better then all current one`s ,cheer`s Chuckie.

Dave get them to check as there is a Radiator that`s same as Stagea i did chat to my guy here he found then ,+ it was thicker then stock on in mine ,as i toke him mine & one from 32gtst he looked & found them all in his BOOK ADRAD so get them to look harder & i think Price was about $450 & that was for Auto ok ,I will try to find out some detail`s sunday from him ok ,cheer`s Chuckie .

TJ You Have PM Cheer`s Chuckie.

I have one should be ok . pipe work will be tight on stock bar but it`s a neet fit other wise , Don`t need to do much , Just mark & FOLD REO BAR there is some pic`s i put up before, Cheer`s Chuckie .

G`day ,I fitted front mount to my Stagea Blitz`s type,now you will need to mod Reo but don`t cut it OUT just Mark & slot REO THEN BEND IT UP so it will fit no need to CUT IT OUT ,& if you want to remove it just fold it back & get it rewelded all sweet you will not know,Good luck Chuckie.

Stock filter 15208-h8911au

Guy`S Do you READ WHAT IS SAID ON HERE ,What don`t you get about what i did & have been running on my CAR As i SAID BEFORE ON HERE you can run the ROTOR ok bolt it on & go ok , if you have to KEEP ASKING THE SAME THING REALLY get with it,you have the Photo`s on here & as i have had no Problem`s what is the PROBLEM , i just don`t understand WHY YOU CAN`T follow what i have said & done on this GOOD LUCK .

Guy WHY CUT IT OFF , i fitted one to my Stagea,I just FOLD IT UP ,so you still keep all metal there + if you do sell you can fold back & weld up with out messing REO BAR , Cheer`s Chuckie,

Hi Trans temp should be around 100 to 110 Degrees so maybe look at a few thing`s, look at if you really need a TRAN`S COOLER ??,as it`s going in to rad,look at your Thremostat & what temp it is,mine come with 82 degrees C so you will need to get ENGINE TEMP UP may need to block most of the air flow ,as we did when in UK IN WINTER & TRANS is very temp sensitive ,good luck cheer`s Chuckie,

Hi I would use can of spary soft grease (crc) & wrap in cling film,should be ok,cheer`s chuckie.

G`day Lad`s & Lasses,i did brake upgrade on REAR`S with Braided line`s & Really couldn`t tell the Difference ,now i know that rear`s don`t do that much but iam not sure the Braided are worth the Money,Now really we should REPLACE front LINE`S as they are now some 10 year`s old ,so may be i will look but may be not Braided,& having done New sotted rotor`s & EBC pad`s & brake stopper i fell that there much better may be 35% better then stock setup sure FEEL much better,cheer`s chuckie.

PLEASE CLEAR YOUR PM`S or reply to PM`s sent,cheer`s chuckie.

Hi Not sure off R32 not GTR had 26 motor & did have big rotor`s on them,cheer`s chuckie.

Lad`s & Lasses,i did the retap to the 32 4 pot`s was going to use them but changed my mind,happy to run Stock setup as i like the 157 mm pad size & price in stead of 130 mm,the bolt size is a big difference here`s few photo`s i took,all so have retapped R32gtst front caliper`s for sale,stripped to ali ,if any want`s them for S2Stagea,pm me.[attach ment=240892:june_10_089.jpg]

G`Day All iam now in middle of modding my Front Bar stock,i have found another nissan bar to cut up & replace the crap in centre of the bar i shall take Photo`s as i go,but iam one for STANLEY KNIFE Tape all that your going to cut so you can follow LINE`S,I did price someone else to mod bar & when told $300/$350 i said thank`s will try it my self,cheer`s chuckie.

THEN MAY BE POST IN RIGHT SECTION LIKE [WANTED] LIKE MOST WILL DO