fraz gts4

Can you just swap the 5v and 0v wire on one of the pedal sensors?

I have a mate running a very hot 2J and he has started running a methanol petrol mix over ethanol as its easier to get and store, and he can cart the methanol to the track and mix it there with local pump gas. I believe the tuning is not too different vs e85, but I don't know about the functionality of a flex fuel sensor on methanol. Edit, this is in taranaki NZ

I think the 2:3 ratio was written backwards by someone and requoted by others. Should be 3:2

R34's are 1:1 32 and 33 are around 70%, I think it was 3.7v to the attesa ecu for 100% throttle.

You also need the tps signal from the ecu to the ets controller.

Im also very keen, could you put my name on the end of the list? Thanks

You have to have all the abs sensors hooked up. You can just unplug the abs unit in the corner of the engine bay and re-plumb the lines so they dont go to it. Im having the same problem, its nearly sorted, you just keep the stock sensors and your away

I used an 80mm throttle off a q45 v8, it bolted on and was half the price of a shiny billet one