neil_se

Seems to me that there would be too much friction to get the strap tight over the front and rear tyres (with sticky tyres anyway). With the 4 ratchets positioned as per the top photo, accessing them would be difficult and the height of the ratchet itself would be too tall for the ground clearance of most race cars. On my previous trailer I used choker straps which worked very well. There was still a lot of friction to overcome on a single sticky tyre. My new Tilta came with it's own over-the-tyre system.

Not sure if you've got many options near you but some Tint A Car stores do it http://www.tintacar.com.au/car-protection/paint-protection-film

Clear paint protection film will do the job nicely. It's not cheap, but worth it if you've got paint worth protecting.

Seems much easier to order from here http://www.unrealplates.com.au/

Are you running in classes that strictly restrict you to the CAMS tyre list? None of my local events care, only state-level competition. I'm a big fan of the NT01s for long-lasting tyres that work from cold.

They'd both have the same outer barrel with 172mm dish and they'd both look the same sitting next to each other. The "disk" changes the thickness of the centre where it bolts to the hub, you'll need to choose based on which offset will give you the fitment you're after as well as giving brake clearance. The 18x13.5-26 R-disk will sit 1" further outwards than the 18x13.5-1 O Disk, giving a lot more room for the calipers. The R disk would extend 70mm further outward than your Enkeis. This is 18x11-8 O Disk BBF finish (147mm dish).

Bump

Z221s sold.

Thanks, I've fixed that typo. 11/12 for the Hankooks I couldn't see a date stamp on the Michelins?

I've stepped up to 295s on my new project so these need to go! Set 1. Hankook Z221 C70 (Softs) Size: 255/40/17 Quantity: 4 Condition: Near new, barely scrubbed in before I blew my engine Price: $1000 (I paid $1516 a few laps ago) Set 2. Nitto NT01 Size: 255/40/17 Quantity: 4 Condition: Well used but some life left. Still soft and turning out great lap times! Price: $200 Set 3. Nankang ATR Sport 2 Size: 235/45/17 Quantity: 4 Condition: Near new, did about 500km before I took my car off the road Price: $280 Set 4. Michelin Porsche Cup N1 on Rota GR6 rims Size: 25/64-18 on 18x9.5+20 Quantity: 4 Condition: Used but decent amount of life left. Rims are in good nick. Price: $950 More pics http://s950.photobuc...15%20Headlights

This is pretty much it. Tint retains heat. Toughened/tempered glass is treated to 600 degrees so will handle the additional heat load fine. If it's laminate glass (like your windscreen) then heat builds up on one half of the glass more than the other causing differences in expansion and the glass cracks. Tint shops aren't interested in the liability for the sake of $50. If your sunroof is etched in one corner with "toughened", "tempered" or "TF-A" you'll be fine. If there's no marking I'd be cautious.

I did mine recently in a light grey. I was going to use matte but the gloss is easy to clean and easier to buy as well. The dash and rear parcel shelf are still black to maintain reduce glass reflections.

As much as I'd like to keep these they're just not suited to a track car. Work Meister S1 3P 18x9.5+3 with 225/35/18 18x11-8 with 255/35/18 All in good condition, 1 or 2 bits of gutter rash $3700 ono Located in Toowoomba or Brisbane

This has been my partner's car since new but the lease ends soon and it's time to move onto something a bit more practical/boring. - Brand new Pirelli P1 tyres (plus original full size spare) - Tint-A-Car Formula 1 darkest legal tint - Eibach springs Further pics & details: http://www.carsales.com.au/private/details/Toyota-86-2012/SSE-AD-3482161 Price: $24,390 Location: Toowoomba, Qld Contact: 0402 546 596

This one, or Epotec 370 for around $140. http://www.bunnings.com.au/dy-mark-8l-epoxy-clear-garage-floor-coating-kit_p1580413

Total, Impul and Nismo logos are all available in vector format on Brands of the World so that will save the sign company a stack of time. Calsonic you can just retype using "Nissan" font. http://www.brandsoftheworld.com/logo/total-2 http://www.brandsoftheworld.com/logo/impul http://www.brandsoftheworld.com/logo/nismo

Unreal. Good luck with the next goal, would be an amazing feat to get the outright fastest radial GTR while still using the H pattern box too.

You'd be unlikely to be able to pick the difference between a T15, 18 or 20 so go with whichever company is more reputable and has a better warranty (materials AND labour). Once applied to you windows the darkness will actually be 25% less anyway due to the green glass (ie. a T20 film will actually be 15% light transmittance).

I've got a few items available due to upgrades. Can negotiate postage (except on heavy/bulky items) or delivery to SEQ for fee. Enquiries by PM, email [email protected] or PM for my mobile number 1. HSD Coilovers to suit S14/15. Only done approx 6000km and in very good condition. Fitted with 7/5kg spring rates but also comes with a pair of 8kg springs. Very nice on the track and street, only selling due to upgrading to Ohlins coilovers. $850 2. R200 VLSD Diff (standard S14) with 3.69 ratio, non-ABS, 6 bolt driveshafts, 2 bolt cover. $150 3. R200 Helical LSD Diff with 4.08 ratio, non-ABS, 6 bolt driveshafts, 2 bolt cover. Selling due to Nismo diff upgrade. $220 4. 6 bolt halfshafts, 2 pairs available $80 per pair 5. Subframe collars, only used for 1000km before upgrade to subframe risers. $35 6. S14 castor rods with Nolathane bushes. $40 7. Genuine Recaro reclining seat and rail for sale. There's some wear with a few pulls in the fabric and it's a bit dusty. The right side of the base has been flattened a bit and it looks like the foam inside has split. $400 8. S14 S2 Kouki front widebody guards. I'm not really sure how much wider they are over stock or how to measure accurately, they were sold to me as +20mm. They look like they've been fitted previously but I never did on my car. There's also a spare RHS guard. $150 9. S14 S1 Zenki front bar indicators. $40 10. 450x300x90mm intercooler with lots of random pipes, joiners, and a Turbosmart BOV. Came off my S14 with 300rwhp. $100 11. Blitz pod filter, was fitted to a Z32 AFM. $20

Are you willing to purchase from O/S?

I picked mine up, looks perfect.

No, the loophole was closed years ago.

1:34.6 so far, going great guns.

Payment details available yet?

Nitto NT-01s are similar to the R888s (reviews I read rated them higher), I paid $285ea including shipping from the US for 255/40/17. They're very quiet on the street and I don't have to worry about heat-cycling, but of course they're not going to be as quick as RE55s/Dunlop D03Gs/Federal FZ201.