RGR33

Anyone? anyone at all? Sorry to bug need to get this done! Thanks guys Ryan

Hi Guys, Another alarm install question... I have installed the boot release solenoid to enable electronic boot release in my car, so that i can wire it up to the alarm and have remote boot! But.. i tested the wire from the alarm that is meant for remote boot (red/white) with the multi meter, and it only seems to hit about 0.6 volts. I wired up the relay and it doesnt seem to be working. I tested the relay with the red/white wire and ground, and it doesnt flick the relay over- no sound at all. This makes me think that the output from the alarm is not powerful enough to flick the relay. Which means no matter what i press on the alarm remote nothing will happen. Is there something i need to do to amplify this power enough to power the relay? Thanks guys- my head is swimming with electrical crap that i dont understand enough to do any more! Im stumped! Ryan

Hi guys, Have bought an actuator... now i cant figure out how to wire the thing in? My instruction booklet is crap, so thats no help. Anyone done this before on an R33? Do i need a central locking control unit as well as the actuator, or just an actuator on its own? Cheers Ryan

Hi Mate, I go away to work on the 4th of Jan, do you know where else i can get one? Heres another one for ya... my alarm automatically arms after 30 sec, is there a way to connect the alarm to my turbo timer so that after the car turns off, it arms automatically? Otherwise, is there a way to wire the alarm so that it can be armed while the engine is still running? Thanks Ryan

Thanks for that mate, where can i get actuators from? Do i need one for drivers and passenger side, or will the drivers side automatically unlock the passenger side as it usually does when i unlock with the key? Thanks, sorry for my newbie questions! Ryan

Sorry Chris, Its a 1993 series 1 r33

Hi, Sorry to drag up old news.. but what is an actuator? My R33 already has central locking, but not keyless entry- which is what i am trying to install... But in my door there are only two wires leading to the door locking thing... one is black and one is white. But when i splice my alarm keyless entry wires into these two it does weird stuff- the passenger door unlocks, but locks again in about 1-2 seconds and the drivers door does nothing. Anyone explain that one?

Hi all, Have installed an alarm in my r33, but cannot for the life of me figure out which wires are for the door lock/unlock. Can anyone point out where these wires are, and what colours i should be looking for? Thanks guys! Ryan

Hi all, I have been having heaps of problems with my window motor/regulator on the drivers side. I am unsure what the actual problem is, but i am considering ripping everything out and rebuilding with series 2 gear... will this work? Here is what i have done so far: 1) window was not winding up or down- banging the door would let the switch work 2) eventually, it stopped working at all- i changed the regulator and it worked for a while... 3) now it winds up, but not down. I used my old regulator, took the shell off and press the reg buttons themselves on the little motherboard. This is the only way the window will work. 4) through all of this time, i can only wind the window down 95% max- if i wind it all the way down it gets jammed and i have to pull everything apart and get to the actual motor to push the teeth back on track so the motor will work. 5) window is very slow and now doesnt wind down at all at about 30% down, unless i push it to help it on its way. I have taken everything apart, looked at the motor and reg and its wiring, and cannot see anything that should be causing a problem... im out of ideas! So my next step is to consider an upgrade to S2 gear- i believe the Series 2 r33 window motors do not have that crappy little black regulator box that always screws up on Series 1's. Thanks, appreciate any help/comments! Ryan

Hi, anyone know if S2 front guards will fit a s1? Thanks! Ryan

I can do it for ya! I can quite easily take the image you have in photoshop and turn it into a web page- i have made myself quite a few sites in the past Let me know if you still want some help Ryan

I would love to come for a cruise! Would be good to put some faces to the names i see on here. I have only been on here a short time, and had my R33 even shorter (about a month now). Will it be posted when a decision is made? Cheers! Ryan

Theres a couple of dodgy doctors floating around... (ie. doc death!), and then theres the catholic priesthood! (hide your children). haha sorry couldnt resist

Problem is... in multi level marketing there is a very fine line (as defined by Australian state and federal law- you have a problem you can take it up with them) between ENTREPRENEUR and CRIMINAL. I have seen first hand the damage a company that was around for YEARS as a multi-level marketing company- called Omega Trend. This company and its 'entrepreneurs' has recently been in a world of trouble and many of them are in jail for being part of a 'pyramid scheme'. Multi-level marketing is one of the more dodgy forms of business, and if you disagree, then you are living in a bit of naivity!

Emu farm maybe? "No more get rich quick schemes, this time we are going to get rich... and quick!" Homer Simpson