SKYLINE SAMOA
-
Posts
11 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by SKYLINE SAMOA
-
-
Loads more stock now available!
Hi mate,
After a full system for ER34 rb25det neo 4 door
Options with prices would be great
Thanx
-
Hi All,
Just boosted my stock turbo on a R34 RB25 DET with neo head, stock boost was around 7-8 psi, after installing a turbosmart boost T we have boosted pressure to 14 - 15psi, say 14psi. The problem we are having now is that on full stick the engine rpm winds to 5000 rpm, pauses for a while then winds out to 7000 rpm nicely. Any idea what might be causing this slight pause at 5k under hard , full acceleration??
The problem seem to be possibly heat related as on the 1st run it seems find but on the 2nd , 3rd and 4th run the problem occurs, possibly the timing adv., sorry no dyno in Samoa
Help apprecaited.
-
Hi All,
With a stock 2000 RB25-DET NEO engine is the turbo steel, ceramic or plastic? Also I have just installed a Turbo Smart electronic boost controller and wanted to ask what would be the max boost you could run for short drags etc with the stock turbo?
-
Hi Fletch,
I am in Samoa (aka western Samoa), Since you where probably out this way last we have switched the side of the road that we drive on so the doors have been open for the last 24 months to imports from
Japan, NZ, Aust and Singapore. I picked up my R34 RB25DET NEO in Singapore for around USD$3500. Car is in excellent condition but 4 door and tiptronic auto.
Just to set the story straight basically if I have a RB25 NEO head all I need is a RB30 or RB30e block + rings and bearing basically to o/haul the 2nd hand block and a RB30 water pump.. The aluminium welding that is needed is done to the head or the block. I was under the impression that the head is untouched and the block you need to weld over the VCT and machine it flat again. In regards to the block, why does it have to be machine down, is this because you use the RB25DET piston heads in the RB30 block and use the STD RB30 conrods??
We can do the welding and machining here thus why i asked. I also read on the forum about changing the Crank angle sensor and you mention above a RB26 head gasket not a RB25 gasket??
Thanks for the parts contact in NZ, currenly burning a hole in my pocket buy genuine parts from JAPAN.
Hi Fletch,
Did you get my reply? Thanks also for the websites, the only thing is that STA parts website does not work
-
hi Josh, are you in western or american samoa? I have spent a fair bit of time working in american samoa and its full of v8s!!
I never saw any rb30 cars in either place so i assume you are going to get one from nz?? If you do, get a mate in auckland to pick up standard rings, bearings, water pump, rb26 head gasket from segedins auto parts by the airport http://www.staparts.co.nz/ probly the cheapest place in town for stock stuff.
Should be good for at least 400hp at the wheels. including myself, i know of 4 cars in nz making that power on stock rebuilt bottom end.
Do you know an aluminium welder? if not, it may be cheaper to get buy a bare head at the same time in nz and get it welded and overhauled and sent over with the block.
You just need a stock rb30e bottom end.
I can reccommend hytech engines in manukau for the machining and welding of the block and head. http://www.hytechengines.co.nz/ he has done all of my friends rb30's for a reasonable price and no problems so far.
Hi Fletch,
I am in Samoa (aka western Samoa), Since you where probably out this way last we have switched the side of the road that we drive on so the doors have been open for the last 24 months to imports from
Japan, NZ, Aust and Singapore. I picked up my R34 RB25DET NEO in Singapore for around USD$3500. Car is in excellent condition but 4 door and tiptronic auto.
Just to set the story straight basically if I have a RB25 NEO head all I need is a RB30 or RB30e block + rings and bearing basically to o/haul the 2nd hand block and a RB30 water pump.. The aluminium welding that is needed is done to the head or the block. I was under the impression that the head is untouched and the block you need to weld over the VCT and machine it flat again. In regards to the block, why does it have to be machine down, is this because you use the RB25DET piston heads in the RB30 block and use the STD RB30 conrods??
We can do the welding and machining here thus why i asked. I also read on the forum about changing the Crank angle sensor and you mention above a RB26 head gasket not a RB25 gasket??
Thanks for the parts contact in NZ, currenly burning a hole in my pocket buy genuine parts from JAPAN.
-
The Neo has vastly different combustion chamber size requiring different pistons
Hi Adriano,
When you say the NEO head requires different pistons, it this on a std. engine or when changing from a RB25 to RB30 block and using a NEO head.
-
Hi Josh, i didn't need to do alot of things and I'm running the stock intake. i re drilled the engine mounts, welded the oil VCT oil gallery, rounted an external oil feed to the VCT gallery and rebuilt the motor. not that complicated at all.
regards
Chris
Hi Chris,
Thanks for that info, did you use a turbo or non turbo RB30 block? Also what was it like after all that hard work? Was there a huge increase in power? Are you running a R34 RB25 DET standard head or the NEO head? Sorry about all the queations but the street drags in Samoa have truned out to be a battle between the american V8's and Jap imports and so far the V8's are winning. Did you put the all expensive forged pistons in the RB30 block along with the forged conrods or just use the std. rb30 pistons?
-
Yes it's possible, i finally dropped mine in today. I cant wait to start it!!!!!
thats great to hear, what exactly did you need to do, please note i am running a rb25det r34 with neo head
-
excatly the same . only difference between the two is the cas
so if the crank sensor is the only diff, thats not to hard to solve. So basically i buy a rb30 block, o/haul the dam thing and change the pistons if needed and bolt the rb30 block directly onto my rb25det neo head and thats it????
I gather i will need to buy a rb30det block not a rb30de block?
-
Hi All,
Posting form Samoa after reading the 300 pages on the RB25 to RB30 conversion and have a few questions if anyone can help out. You see in Samoa there is no one to talk to thus why I joined up.
The 300 page attachment talk mainly about R32 and R33 Skyline but does not mention if the conversion is possible on R34 skyline??
Has anyone out there done this on a R34 Skyline and if so what basically has to be done, how hard is it???
Genuine Hybrid Performance Products
in For Sale (Business Traders)
Posted
Hi mate,
the post is old buy i am interested if still avaliable, running er34 rb25det neo