Coxie

I think if you have the boost control solenoid operating it will start off runnin 5 psi until 4500 rpm and then the rating of the actuator, r33 being 7psi and r32 10psi from 4500rpm upwards. And the low boost setting isn't adjustable. Correct me if i'm wrong if anyone has tried this?

Yep pretty common from what i've seen with intercooler kits to have to trim the viscous fan blades for clearance issues

Yeah thats the kinda boost you'll be expecting with the r32 actuator. Did the same thing on my 33 except I just ditched the boost control solenoid completely instead of earthing it. Switching from my standard actuator to the r32 item put boost from around 8 psi up to around 11psi, this was with a front mount cooler and full 3" exhaust. I wouldn't want to push the stock turbo past 12 psi just to make sure you're not stressing the ceramic exhaust wheel too much.

ACTIV32 - yeah I know they usually make moulds first but that takes alot more fibreglass materials and since this is a one off I thought i'd try just build off the original bonnet and see how it turns out. Been 7 weeks since my accident now, just got my arm out of the cast and now have to wear a splint and start physio next week, have next to no movement in my thumb at the moment, hopefully that improves fast, going nuts with not being able to do anything!

I managed to track down what kind of alarm it is and found a manual, it appears to be a mongoose M60 Series. And with reading of the manual I think what has happened is when I tried to start the car the 2nd time, but battery was flat so just turned ignition on and off repeatedly, the right amount of times to put the alarm into remote learning mode, which would explain the 3 short beeps shortly after. And since I didn't repsond with my remote it deleted it from memory and now has no remotes programmed to work with it. The problem here is to get back into remote learning mode I have to disarm the alarm before switching the ignition on and off 3 times, but I can't disarm the alarm without a remote... so I'm stuck. There must be some way of disarming the alarm without needing a remote...

The alarm is not struggling to sound when I try turn the key so I don't think the battery is the problem. In the past the alarm would still work until the battery was completely dead

Car battery or remote battery?

Ok so I had the battery out of my car to give it a charge as I havent used the car for awhile. Put the battery back in (did accidently arc the spanner out on the parcel tray) and alarm was still working (disarming immobiliser)tried starting the car but the battery did not have enough grunt to start the engine. After checking if the terminals were tight and secure, shortly after I heard 3 beeps from the alarm, as if I had kicked the tyre or sumthing. I then tried to start the car again, but the immobilizer would not disarm, I can see the light on the remote flicker but I am not getting any response from the car. Strange thing is that when I watch the LED on my steering column flashing and I had down the button on my remote, this LED will stop flashing, so the alarm is obviously recieving some signal from the remote. Have checked all fuses, but can't find anything wrong. Car is r33 gtst s2, unsure of alarm type as there are no brand names on the remote or the black alarm box under the dash. Anybody have any idea what could be wrong?

Got the exact same thing in my r33 mate, had me stumped when I found it too.

bought one of these dump pipes awhile ago and it blocked my wastegate from opening at all, boost would just climb up & up. Problem was resolved by grinding down the side of that divider and also cleaning up the wastegate pipe entry. Just poor quality control when theyre manufactured

Hey guys, I'm looking at building up a 3L bottom end for my r33 gtst, i've had a search around and found info on what pistons, rods, bearings etc to use but was just wondering if anyone out there who has plenty of experience building RB engines has any tips/tricks to use during the build (modifying par ts, doing something a different way etc etc). I've had experience with engine tear-down, measuring & re-assembling but any steps you take along the build process of RB specific engines would be much appreciated.

Yeah will be for a road car, laws arent too harsh over here. Costs were about $50 for 5L of resin, $5 per square metre of matt, so about $15 - $20 worth, and $30 for body filler so it's been pretty cheap so far.

hey guys sorry about the lack of updates, the project is on hold for awhile now. I was building a rabbit hutch 1 day and when cutting the wood the skillsaw kicked back on me and had a go at my thumb, leaving a nice wound and cutting through the tendons so surgery was needed and now my arms out of action for atleast afew months... i'll attach a pic of my thumb

Both items are fine, they are just as good as factory items if made properly. Never seem any problems with them cracking or anything, only problem i've seen is with carbon fibre bonnets when the clearcoat/gelcoat fades and turns a whitey colour and sometimes flakes off, usually caused by old age spending too many hours under the sun or just lack of care and it is purely cosmetic.

Finished glassing the rest of the bracing onto the bonnet, waiting for it to set now, hopefully it turns out alright, sunniest day we've had here for awhile so it should get a good chance to cure.. Heres another pic...