will34

update for you all, replaced upright arm and hub - issue resolved.

Thanks GTSboy, appreciate the input I think that will be the best route to take. It hasnt had a hit in my 13 years of ownership and the kingpin angle was fine (11/12) when I had it aligned 3 years back now Ill track down a shop in Vic to get it measured up for the subframe and all

Hi All, Found an old post you commented on from 2006 "On Skylines the spindles (vertical suspension arms) can and do bend. If so the easiest (best) method of fixing it is to replace the thing. Don't bodge the thing up - fix whats wrong." Is there a easy way to tell this has bent if not visually (tried to measure same points on the other side but was the same and im not sure I am doing it correctly). Long story - had my car in for alignment (they ended up running out of time so they just took my measurements). Anyway my front left KingPin Angle is out (its 10 degrees vs 17 on the right) with 5 castor. Cannot for the life of me figure out what is up with it, the adjustable camber arms are both set to the exact same length and the lower control arm seems fine (measures 315mm hole to hole same as the drivers side) Alignment looks like Front Toe L-2 R-2 Camber L-1.35 R-1.33 Caster L5.44 R 5.22 Kingpin L 10 degrees R 17 degrees

unfortunately not. I contacted the seller.

$150 a wheel if anyone wants one. To confirm there's are fcucked. Wasn't just one rim buckled all four has been powder coated and over heated. Good for coffee tables

Unfortunately wheel was not repairable and wheels had been powder coated, bump if anyone wants a individual wheel for a coffee table

http://www.ebay.com.au/itm/112338556775?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 they are now on ebay.

Injector dynamic ID1000's used on dyno only Selling my ID1000sbought from tuspeed, have been used for tuning on dyno but too small for my needs and have upgraded to 1650cc. were for an r32 gtr but i imagine would suit other applications. comes with plugs as well. part number: 1000.60.11.d.6 Price: 720 posted aus wide pickup in moonee ponds vic or west melbourne(during business hours)

import monster has these for 250 recently think its killing your market mate hold onto them as a spare wrap them in garbage bags and store in cool place

bumping old thread to chasing someone who can do this in melbourne?

you have a pm

I have some r32 gtr seats but theyve been retrimmed in black/dark grey leather

put me down for an r32 cf rad cooling panel

pmd re guard liners!

what colour are they? whats the paint like? how hard is it to fit these to an r32 gtr?