Jump to content
SAU Community

NiHaoMiaoMiao

Members
 View Profile  See their activity

  • Posts

    48

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Posts posted by NiHaoMiaoMiao

    RB25/30 Neo clearance in 25GT-T

    in RB30 conversions

    Posted · Edited by NiHaoMiaoMiao

    Thanks for the advice @robbo_rb180.

    I ended up cutting the metal brackets for the engine mounts and dropped the motor 7.5mm cold side and 6.5mm hot side. The washers on the bolts restricted how much further down I could cut without fouling them when refitting.

    So far so good... just the TCS module on the throttle body touching the middle brace.

    I have two options here,

    1. Cut out the fouling point of the brace.

    2. Run a R33 throttle body.

    From reading some ancient posts on here, they are pretty much the same throttle body minus the TCS module. Of course I would be re-using the R34 TPS.

    Just wanted to see if anyone has had any issues with fitting a 33 throttle body on a 34 or just yolo and go agricultural on the bracing?

    Cheers,

    Daniel

    RB25/30 Neo clearance in 25GT-T

    in RB30 conversions

    Posted

    Hey everyone,

    Just as an update for future reference, it will foul the stock bonnet, definitely touching the cam gear cover and possibly the front corner of the intake plenum. Will look into it more and update here.

    @robbo_rb180  Would I need to extend the steering column/intermediate shaft to be able to space that far down? and would there be drivability issues such as vibrations etc. from the change of geometry?

    @R32GTS-t RB25DET I have fathomed that option but $1500+ for a Greddy, then cutting holes into the body for the cooler piping gives me shudders lol. Also want to retain the low-end torque that the stock plenum provides.

    Would anyone have any experience of it fitting with just the resizing of the engine mount holes only and some trimming of the bonnet brace? specifically for an r34?

    Thanks in advance! 

    RB25/30 Neo clearance in 25GT-T

    in RB30 conversions

    Posted

    On 1/12/2021 at 8:38 PM, Binarydata said:

    What are you doing for the bottom end? Are you going to use the Neo head? I've got a NEO turbo head and waiting to get a bottom end for it. Not sure if i want to go factory 30 for forged

    running standard crank, forged internals (cp pistons, spool rods, acl bearings).

    0.5mm bore and hone to suit pistons and the usual things to do while apart such as linish crank, grub screw crank etc.

    the stock rb30 bottom end will take a beating if its in decent condition. i just went with forged as i was already there and will go for bigger power later down the track.

    RB25/30 Neo clearance in 25GT-T

    in RB30 conversions

    Posted

    On 1/8/2021 at 1:12 PM, Binarydata said:

    Hi, sorry can't help, but was wondering if you had a done the swap yet? I've getting ready and haven't seen much in the way of this. 

    Hey mate, not yet. Build had a few delays but should be together soon! Got the bottom end assembled. Will update here for future reference 👍

    Cheers!

    Daniel

    RB25DET Neo head valve spring washer

    in Forced Induction Performance

    Posted

    Hey guys,

    Just wondering if there is any differences between the intake and exhaust valve spring washers? The ones that the spring rests on.

    I didn't have them taken prior to getting it cleaned so they came back all in a bag.

    Also, I thought I read or watched a video where it mattered which side of the washer was facing up... but I may be just imagining that.

    Cheers fellas,

    Daniel

    Adaptronic Modular

    in Forced Induction Performance

    Posted

    You guys are legends! Thanks for the in-depth discussion and support.

    I had a chat to Trent/Cat and they do offered a really competitive price in terms of supply and tune. They do prefer Haltech as they believe Links are harder to tune.

    I've been watching a lot of videos on tuning lately, so learning lots as well.
    Picking up head today and start re-assembling, get clearances done on that, and hopefully bottom end mid next week.

    Keen as a bean if you can't tell ?

    Definitely will have lots of questions if I go down the tune it myself path.

    Cheers again fellas ?

    • Like 1

    Adaptronic Modular

    in Forced Induction Performance

    Posted

    Thanks guys, really appreciate the info and experience!

    I think I may be swayed to the Link G4X due to the features, I will definitely have a chat to Trent first before jumping the gun.

    11 minutes ago, robbo_rb180 said:

    are you going to do the install & initial setup? 

    Yep, I was planning to install it and get it drive able before it goes to get a tune.

    I initially wanted to tune it myself, but with no experience, I thought it best be taken to a professional. 

    • Like 1

    Adaptronic Modular

    in Forced Induction Performance

    Posted

    53 minutes ago, Dose Pipe Sutututu said:

    I find Eugene (the software) is buggy and isn't as polished, I preferred the older WARI software on the Select series much more as it was stable and didn't insert random values during the read/write.

    Thanks Johnny, that's really good to know.

    I think you boys have definitely helped sway my decision. Definitely between the Link and Haltech at this stage.

    While I would love to think I'll be keeping my mods mild for the 25/30, the mod bug is already itching and engine is still getting final measurements done at the shop (rings gaps etc.) ?

    From your experience Johnny, do you have a preference between the two?

    Adaptronic Modular

    in Forced Induction Performance

    Posted

    GTSBoy my saviour! haha

    Wow, no I didn't know about that. The lower cost enticement is diminishing if support is cr*p.
    As it currently stands, once the motor is done, it will be running a standard turbo for the time being.

    However, it will definitely be getting a decent power upgrade down the track, perhaps one of Hypergears AT45s, G35 or 3582r etc. so that rules out the Nistune I guess? Is there more details as to why the Neo ECU has issues with lots of power? 

    I do like the Link, but it seems that I will need to fork out extra to delve down the path of MAP sensors where as the cool-aid ECU has inbuilt 1.5 bar...

    Adaptronic Modular

    in Forced Induction Performance

    Posted

    Hey all,

    Have been trawling through various threads about ECUs and I will need to make a decision of what one to use quite soon.
    For initial break-in, I will be using my standard GTT ECU.

    The general consensus is Nistune is more than enough and if budget persists, a Haltech Platinum Pro or Link G4X.
    Engine will be a RB25/30 Neo.

    However, during my research I did come across the fairly new Adaptronic Modular ECUs which are also plug and play.

    https://adaptronic.com.au/collections/modular-plug-in-ecus/products/emod006-r34-skyline-gtt

    Has anyone had any experience with these, as looking at the specs, it's pretty feature packed for its price.
    I'm no ECU expert, but how would they compare to the Haltech and Link?

    My only hesitation with going Nistune is the thought that I may move away from MAF to MAP in the future...
    Tuner wise, I think I will go with Trent from Chequered Tuning as he is VERY reputable.

    Cheers!

    Daniel

    Best Pistons Choice ?

    in Forced Induction Performance

    Posted

    5 hours ago, Nyke said:

    I m thinking of buying Tomei piston kit 86.5mm with no recess. Can i just change that kit without changing stock crank shaft and con rods?

    Or

    Do i have to buy stroker kit which includes crank and con rods. 
    thanks

    Link for the kit? You will need to bore and hone the cylinders 0.5mm if they haven't been done before as the stock pistons are 86mm.
    While you have the whole thing apart, you might as well give it an acid bath, make it nice and clean and make sure you check the deck, machine if needed. Big list I could yap on about and it will start to add up fast. lol

    A stroker kit will come with the lot so not sure how much help I'd be without more info (the machine shop work is unavoidable whichever scenario you head in).

    First question would be, do you really need a rebuild? Low comp, damaged internals or just because? as RB's make plenty of power with a stock bottom end.

    How to RB30/25 Swap into an R34 [Video]

    in Tutorials / DIY / FAQ

    Posted

    18 hours ago, Rusty Nuts said:

    Mine cost $8.00 and I got it from supercheap the day I needed it. Don't forget the KISS principle.

    Yes, I did see your one Rusty and was my initial plan, however, when I was getting quotes done for the fittings and braided line from Enzed/Pirtek, they wanted something along the lines of $160...
    Love your setup though, so nice and clean!
    Mine will fit behind the backing plate of the cam cover, I'll dig out the photo...

    • Like 1

    How to RB30/25 Swap into an R34 [Video]

    in Tutorials / DIY / FAQ

    Posted

    On 9/10/2020 at 7:59 PM, Joni Boi said:

    Thanks! I've heard some guys on here have gotten away with the stock R34 GTT bonnet. Mine is aftermarket (Z-tune fiberglass i think?) that has fins pointing towards the engine and they did foul on the stock intake plenum and throttle body aswell as the intercooler pipe running over the fan and it couldn't close. Because it was fiberglass, I just grabbed a dremal and hacked away on the under side of the bonnet to make it close. It barely closes now and is still rubbing on my intake plenum and pipe. These Z-tune bonnets come with a tray under the fins so that you don't get rain dripping on your engine. I can't run that tray so I just use aluminium tape to close the fins. I wish I could go FFP, only for the clearance and ease of service but they are out of my budget.

     

    The engine is now on the 10000kms mark. Been using the car everyday to and from work. Hasn't had any issues yet. Running mint as ?. There is still a little oil leak coming from that f*c@ing!!! external shitty VCT weld which is causing my belts to be a bit oily which is not good for the timing belt. But it doesn't drain my oil under the dip stick mark before the next service. I will have to replace it and see what I can do with the leak some time. 

    It really feels like it needs a bigger turbo. I can't wait to get a new one. I was thinking of hypergear's ATR45 BB? Just a simple bolt on to stock rb25 mani. 

    Yes, that's great to hear she's running mint! 

    Fingers crossed mine fits as I have a stock bonnet ?.

    I am also in the same boat in regards to the FFP, a lot of money for really not much gain performance wise (esp losing low down torque!)

    It is a shame about your external feed though, I resorted to using a kit I found from a NZ performance shop, which I'll link for you here.
    https://franklinperformance.nz/products/nissan-rb30det-vct-oil-feed-kit
    It cost me like $105 delivered and only took 3 -4 business days so worth a look. (it also comes with instructions)

    I'll post up how the bonnet clearance and VCT feed goes once I get the car up and running (hopefully in the next couple of weeks...)

    Also, thanks for the suggestion there with the turbo, they look very good value for money, as I also want to retain as much of a factory look as possible!

    RB25DET Neo Oil Pump

    in Forced Induction Performance

    Posted

    GTSBoy, yes that is a fair point too. I guess it is hard to verify on public forums lol.

    Too true Johnny, I did fathom the Nitto pump as they are amazing and have very good reputation but the $$$, and totally agree the poor man pays twice, ouch!

    Thanks for the advice and conversation gents! Now off to ponder the decision to make...

    Ah good old RB life.

     

    RB25DET Neo Oil Pump

    in Forced Induction Performance

    Posted

    hey guys, thanks for the advice! appreciate it :)

    Wow Johnny, those gears are completely cooked ?

    GTSBoy, yes that is true, my initial thoughts were to either put a new N1 pump or re-use the original housing if viable just not to double up on costs. My next question I guess would be, were those claims of "not good" ever really verified or just a he said/she said scenario?

    RB25DET Neo Oil Pump

    in Forced Induction Performance

    Posted

    Hey all,

    I am currently in the process of building an RB30DET Neo and was planning to re-use my oil pump as it is an N1 type...

    However, upon removal, the drive gear face looks like it's been slapping against the crank on the edge so looks like I'll need some billet gears. (previous owner must have like the limiter...)

    Housing does look ok, but there are 2 wear marks? that I can feel.

    Do yas reckon the housing is still usable? I am trying to avoid buying a new N1 type oil pump as I've read they are not of the same quality...

    Cheers!

    Daniel

    rb oil gear1.jpg

    rb oil gear2.jpg

    rb oil housing.jpg

    RB25/30 Neo clearance in 25GT-T

    in RB30 conversions

    Posted

    Hey all,

    I have spent the last 2 days trawling the forums for information relating to bonnet clearances or mods required for clearance in a GTT.

    A lot of people had issues in R32's that required spacing the chassis and/or modifying the the bonnet brace.

    Has anyone had experience with a stock GTT bonnet? I watched and read John's RB25/30 build and he had to mod his bonnet but it was an aftermarket one.

       Any information would be a god send! 

    Ps. I will be trying to retain the factory manifold for ultimate low end torque. I am also using a return flow cooler so no piping over the top of the radiator fan area.

    Cheers!

    Daniel

×
×
  • Create New...