rosella

They should be fine without spacers. Mine where +38 so needed 5mm spacers.

Yang, Straight install with the only modification being removing the outer lip on the rear backing plates to fit the rotors. I've got them installed on my 2001 NM35 250T RS 4. Also, you may need spacers for the front depending on the offset of the wheels. I had +38mm offset Yokohama AVS 18"x8" rims fitted to mine so needed spaces to avoid hitting the caliper. Now I've got 19"x9.5" rims so not needed. I still have the 5mm spacers. Russel

Matt, you're pretty much on the money. It appears the forces are concentrated downwards rather than upwards. The mechanic suggested that even going in and out of driveways on an angle would cause the issue. The shock couldn't travel much as the coilovers were compressed to produce a lowered effect. I crushed the middle muffler going over a speed hump in an industrial estate a few years ago. I'm also chewing out tyres like no tomorrow and inner tie rod end on the left. I've replaced the item 4 times in the last 2 years. The car is now sitting 25mm higher and may need to go higher.

This has just occurred to my car. It's got BC BR coilovers and lowered. Running 19x9.5 +20 wheels. I showed the information in this thread to the mechanic that is going to repair it. The information confirmed what he was planning to do anyway. BTW, he owns a R34 GTR and worked on the SAU NSW ex-president's N1.

Lawn mowing equipment

I'm withdrawing due to no GF option......wife not impressed :-(

Avant Garde M310 19x9.5 +20 Machine Silver with 245/40/19 98Y Pirelli tyres. Running -1.5 camber and BC Br coilovers. Guards rolled.

I'm in for this one. +1 for lunch. Hopefully they have GF options!!!! No work that weekend so good to give the car a run!! :-)

My top tank split this week. Lots of coolant everywhere!!!! Filled 3 times and local mechanic advised not to drive it. Given the hot weather it's probably worth while. So Mishi is the pick given the comments in this thread? Looked at the e-bay option but feel it's too cheap and nasty :-(

Check the o-ring between the fuel pump and fuel tank.

Actually the M35 was an PNM35?? as it had a 350 RX badge on the back. Plus it had quad tail pipes to boot!!!! Another sighting I forgot to post a week ago. 2 C34s parked on Sydnenham Rd Marrickville. Looks like one's a spare as it had a badly smashed front screen.

Spotted black C34 with wing crossing Showground Rd Castle Hill into Green Rd around 9:15 this morning. Also spotted M35 with plates MYM35T going towards Windsor on Windsor Road near Rouse Hill around 11:50.

Offers around 13,500 Here's the link to gumtree ad: http://www.gumtree.com.au/s-ad/blackheath/cars-vans-utes/2001-nissan-stagea-wagon/1070268008

My setup is: Avant Garde M310 19" x 9.5" +20 with 245/40 tyres. Guards rolled but with BC Br coilovers and lowered. BTW, currently for sale....

I'll check my consumption book tomorrow and post the averages since the turbo mod.

NM35 Feb 2001 build. First aussie owner. Purchased from Japlink Motors in Sydney March 2010. It has the following goodies: Plenum spacer, HdI FMIC, Transmission oil cooler, Transgo Shift Kit, Brembos from 350Z, Uprated sway bars - front 30mm and rear 24mm solid, Front and rear chassis braces, uprated rear sway bar links and BC Br coilovers, Custom 3" exhaust and Scotty Fisher's 3" stainless steel dump pipe, Turbo rebuilt SS2 specs (at 140,000km, two years ago), Avant Garde M310 19" x 9.5" +20 offset wheels with Pirelli tyres 80-90% tread, bonnet gas struts, Greddy Profec B-spec II EBC installed next to DVD-ROM, air horns, 130/90 watt H4 globes in parkers/fog lamps, LED lamps in the lower grille, 3 point immobiliser. Cargo net, privacy screen and cargo over mat to protect carpet; extends to cover rear seats when seats folded forward. After market Kenwood stereo (also have the Japanese original to be included if wanted). Fastfit towbar. I'll throw in the air ioniser and cigarette adaptor with usb charger. Also have a pollen filter cartridge, spare air filter, a few AFMs and extra inner front tie rod ends. 173xxx Kms. Don't want to sell the car but bought a utge for work, so I'm selling the wagon as I don't need two cars!! Well looked after, with oil and filter changes every 5000kms. Offers around $13500.

Finally got the remaining photos done and posted the add to gumtree. Link to the ultimate ad!!! http://www.gumtree.com.au/m-my-ad.html?adId=1070268008

Price drop to $800

Spotted Dale on the GWH at Falconbridge going past the park at around 8:15am. I was in the black RAV4 going the other way really fast!!! :-)

Actually expires June 2015. Thought it was Jan 2014.

Rego June 2014.

Great set of wheels. Were fitted to an Nissan NM35 I purchased in March 2010. Replace with 19" Avant Garde M310 back in March 2012. AVS Model T7 18x8 +38 offset PCD 114.3mm. Lightweight rims at 7.9kg each. Mastercraft Touring LSR tyres 245/45R18 96Y with over 90% tread. Some minor gutter rash as seen in the various photos. These were like this when I purchased my car. Must go as surplus to my needs. Reasonably priced at $850.

It's time to move on from the Stagea. I've bought a ute to replace it so it must go. NM35 Feb 2001 build. First aussie owner. Purchased from Japlink Motors in Sydney March 2010. It has the following goodies: Plenum spacer, HdI FMIC, Transmission oil cooler, Transgo Shift Kit, Brembos from 350Z, Uprated sway bars - front 30mm and rear 24mm solid, Front and rear chassis braces, BC Br coilovers, Custom 3" exhaust, Scotty's 3" dump pipe, Turbo rebuilt SS2 specs (at 140,000km), Avant Garde M310 19" x 9.5" +20 offset wheels with Pirelli tyres 90% tread, bonnet gas struts, Greddy Profec B-spec II EBC, Air horns, 130/90 watt H4 globes in parkers/fog lamps, LED lamps in the lower grille, 3 point immobiliser. 173xxx Kms Offers around $13500. Detailed photos to come. Here's some outside shots taken a while back to tempt you all. :-)

Just started a lawn mowing and garden maintenance business in the upper blue mountains. Borrowed my friend's, Zedhead on the forum, lawn mower. Massive self propelled Masport. Needed the ramps to get it in and out as it's bloody heavy. I generally carry Makita battery drill kit, tool box, Stanley screwdriver set, jack, handle and sometimes chainsaw and accessories. I'll get a photo next time I do a time involving these equipment. The other day I carried 7 bags 20kg quick set cement bags as well. Now I need to raise adjust the coilovers as the exhaust scrapes everywhere now I carry the lawnmowers, slashers and accessories in a trailer now as the fumes are too much!!!

Have you added any wiring or fiddled with any? I had a bad connection in an old car that resulted in the washer coming on when the radio was turned on.