R33Keaton

Will be installing these soon.

Have also mounted the battery properly in the boot now. Just have to install the accelerator pedal and bleed the brakes, then she's ready for a test drive. More pics coming soon!

Picked up a set of these. 4x114.3 0 offset. 8 inch wide. Got some Marshall 195/60/r15s on em. Tiny bit of stretch.

Put the headlights in, struts back in and wheels on. She currently is running, however a bit rough. It seems to be smoking a little bit, as well as idling too high. Will check the timing, but are there any other suggestions on what this issue could be? bad fuel?

Did the battery relocation to the boot. Thanks to ma boi Joshii James for the help. Did it over a couple of burbz (ofcourse). Will upload more pictures of the new set up soon.

Also looking for a strut brace for r31 too!

Hey guys chasing: lowered king springs, 2.25" exhaust system, aftermarket steering wheel, and some rims (4 stud, 114.3 preferably black, wide enough to fill out the guards). Let me know what you got cheers.

Hey guys, need help with how to go about moving the battery to the boot in my r31. I've read a lot of information On how to go about it, but I am still unsure. I know all the battery has to be in a secured box and vented (which I've already done), but I'm more concerned with the wiring and what goes where. Would be great if anyone could show pictures step by step, as I can't find any specific DIYs on this topic. I also wish to put a fuse in the boot as a safety measure, but once again, lack the knowledge and direction with electrical matters such as these. help would be much appreciated.

Farqqq! Finally fixed my camera. It did need a good wipe..

Nearly up and running again! Just gotta finish some of the wiring and hook the battery up. Once again.. sorry for the bad quality pics, my phone camera is farked!

Haha yeah I know somethings wrong my the camera on my phone I keep cleaning it but the pics still are coming out chalky... :S

Bay painted

Painted lower part of intake manifold. Will be putting all the intake back together this week. From plenum to pod

Cheers jez

Slowly getting there.

All primed.

Used old protein containers for mixing the paint

Block primed and painted. Put the old water pump back on so I didn't have to tape the area. Also used a spray can cap to cover the crank gear.

Degreasing

Let's get physical.

Painted strut tops and calipers

Painted

Box sections riveted back on.

The other beast