psi910

Hi , as the topics read I am looking for a non abs BM44 r33 brake master cylinder.. Please pm here or SMS to 0413999888

Pm sent

As the topic read i am chasing lower part of the steering shaft from the Bush to the rack. If your wrecking a r32 or have a front cut lying around and this part is available please pm here or sms to 0413 999 888. Thanks,

I am chasing a r32 o thesteering shaft. I need the bottom half that attaches to the Steering Rack. PM or SMS 0413 999 888 Thanx

pm sent

pm sent

pm sent

i need the pinouts for ca18det afm i need colours and letters please thanks

I have blown the ass out of my No 6 piston so am seeking a good condition RB20 shourt Motor. Sydney prefered. Thanx

bump

I am chasing a set of larger than standard injectors for my rb20. Also a 8cm rear housing for my TD06. Have a 10cm housing if any one wants to swap. Please pm me if you have any thing to suit. Thanx

I am after 6 of these 550cc injectors with plugs. Thanx

Just did a quick search and could not find the answers i was after. 1: Apart from the 6 injectors what else is needed to have them work. ie do i need the plugs of the rx7 injectors. 2: Is there a advantage or disadvatage to S4 or S5 Injectors. 3 :What is a decent price to pay for a set of 6 and also best place to locate a good set. Thanx

i have done the saech thing and had no luck. Can some one please steer me in the right direction in tracking one down

OK i have done a search several times and have had no luck locating a rb20 wiring diagram any where. Can some one pleasse steer me in the right direction. Thanx

Now i work at a nissan dealership but $97 trade for a upper and lower radiator hose is not cool. What other non genuine options are available? Thanx

I am trying to locate 8cm housing to replace my 10cm. Can i use a 8cm of a TD06-20g on my TD06-19c. Thanx

I am about to fit a TD06-19c with a 10cm exhaust housing to my rb20. When should i be expectint to have full boost. Thanx

any one with any info

As the topic says i am chasing a 8cm exhaust housing to suit t3 with internal gate. I have a 10cm with the gate welded shut if some one wants to swap. Thanx

Thanx garage-tuner you have un looked the divinchi code. My TD06-19c has a 10cm rear housing.Now how should this make ny little rb20 perform untill i have another motor built. Thanx

ANY ONE? ANY THING?

any advice, any info would be great

i have a td06-19c soon to be bolted to my rb20. Just unsure of rear housing size and wanted to know wat these numbers on the exhaust housing mean(been told thats the size). Numbers read 79-11200. Rear housing is t3 with internal gate. Any info Would be great.

you have pm