lukeskidz

This car was stolen. Let me know if you have any detials. reward offered.

Bump.

I ahve a built engine for sale 7k complete.

No takers, Cheap as built GTR. Make an offer!

Located in SA Chasing 7k for the engine. FIRM (will ship interstate)

Edit: Also Comes with a big triple core KOYO rad and big drag spec FMIC. both currently installed!

R32 GTR gunmetal grey duco, Overall good condition! Specs are as follows. Just over 100kms on the clock ENGINE R33 block (chemically cleaned, rebored and honed ground and crack tested, tunnel bored) R33 crank, Crack tested, machined and balanced) RACE series bearings Forged Pistons & Rods Rebuilt head (machined, pressure tested) Tomei oil restrictior ARP head studs ARP rod bolts 7.5L sump with tomei baffel kit Complete Tomei gasket kit Gates timing belt Tomei cams OS giken cam gears N1 oil pump SARD 700cc injectors K & N filter Full stainless exhaust including 3" dump and front pipes (quite but nice note) R34 BB turbos Remapped ECU New Fuel pump Car is currently running standard boost Running gear and Brakes Extreme Clutch and machined flywheel Reconditioned gearbox (with Receipts) Slotted DBA rotors & new pads Tein coilovers - standard camber tops white line sway bars Interior Alarm / Immobiliser Aftermarket Steering wheel Torque splitter controller RWD switch TKO 300 kph + spedo I am selling this car for a good friend of mine, i am dealing with all inquiries and test drives etc. due to his work commitments I WILL BE DRIVING THE CAR, NOT YOU, YOUR DAD, OR YOUR HECTIC COUSIN Car is currently running standard boost As i said overall the car is in good condition there is a few blemishes which are as follows. -tear on drivers side seat -slight paint fade on drivers door and boot -repairs to ignition barrel need to be made after a recent theft attempt. PRICE 17k Negotiable, will come with 3 months rego for the right price. I think this price reflects the car in its current condition. Call Luke on 0437061618 after office hours, or text during office hours, Pictures are available via MMS just ask politely We are also considering parting out the car, if you are looking to rebirth a written off gtr, or a complete engine package let me know. the car WILL NOT be split until a deposit for the engine or shell is received. SO DONT ASK Interstate Transport can be arranged, at the buyers cost. Cheers, Luke

Bump 200 dollars, ono!

Hi Guys i have an R32 rear hub and disc assembly for sale! Turbo - 5 stud Slotted rotors, pads and shoes included as well as calipers, hubs and handbrake lines. All in great nick, not needed anymore. $300 ono text or call Luke on 0437061618

Hi guys. I have just bought some 32 brakes that came off a hicas car and the part of the knuckle where the rear trailing arm connects has a ball joint and wont fit as i dont have hicas. Can this be punched out? or will it pop out if i remove the clip thats seems to be holding it in place? This question does sound stupid i admit, but i cant really see how this supposed clip would be holding the ball joint in place. Are the knuckles even the same? I have a 1989 skyline without Hicas. as i said the brakes came of a turbo R32 with hicas. Cheers

Is the shell pewter? curious as if its the one i crashed?

Hi Guys Just looking for replacement rear R32 4 stud hand brake set up! Rotors, pads and shoes! so many people would of upgraded and have these lying around! In SA will pickup this weekend. text, and ill call you when im free from work! 0437061618 Cheers, Luke

The au coilpacks are easy as to fit, just suss the write up on 31 club, you need to cut your coilpack loom up and merge it with the falcon plug, cost me about 200 for the set up + new plugs - all brand new! And the problem was the ignitor pack.

Temp gauge works / oxygen sensor would make it run rich / not missfire... think about it dude, dont just post random shit

Can any of you hectic kebabs help me?

/ IT STILL MISSFIRES...Back to the drawing board... Replaced all the plugs and put in an AU falcon coil pack set up - all brand new so ive pretty much eliminated ignition as a source for the problem. So. -runs fine when its cold. when it reaches optimum operation temperature, i can drive it as hard as i want to for about 5 minutes / dies in the ass -Ignition has pretty much been ruled out. -no boost or vaccum leaks. -not a fuel problem as it only happens when the car is hot. so. Tonight im going to Replace the AFM. After that i might look at the sensors / oxygen sensor? or water temp sensor not letting the ecu change maps (is this even possible, dont know much about rb20's)

Hey guys, so i was at drift prac yesterday and my car started to missfire. It was fine for the first 2 laps, boosted hard and ran awesome. off the limiter fine. then my car died in the ass. felt like a boost leak, reved to 4-5k rpm and just spluttered burbled and died, wouldnt build more boost. went back into the pits - no boost leak at all. So went back out and it was fine again for the first 2 laps / same story. so then i started thinking something to do with heat soak. back to the pits, took coil packs and plugs out, the plugs had fair amount of calcium (i think) build up on them. and when the 5th coil pack came out the spring fell out of it -___-. but even if this was the problem wouldn't the car still run on 5 cylinders? - hadent changed the plugs my self yet - only had the car 2 weeks hmm so thats pretty much what happened. havent had a chance to put new coilpacks in, or plugs as yet. but not that keen on forking out 550 dollars for split fires if its not the problem.. Cheers, Luke

Hey guys, pretty new to SAU, use to have an S15 and crashed it skidding, so now i own a pig 4 door whore. anyways, its been converted from auto NA to turbo manual by the previous owner and i dont know what diff it has? it has fins like an s13 viscous diff 6 bolt non abs, but i am under the impression that these came with open wheeling r180 diff.. so really my question is what diff did these come with standard, r180 or r200? if so which 2 way can i get and which half shafts do i need? so confused... Cheers guys... If your just got to flame me for being a skyline nub, go and bat of your brother..

Hey guys, just looking for a 32gts-t 5 stud set up for my 32 4 door. needed all the usual bits, lca's hubs, calipers, rotors, pads etc front and rear Have the money ready to buy, will need to post to adelaide at my expense. Mods - Sorry if this isn't the right spot i couldn't find a WTB thread. Cheers Luke

Hey mate, i have a rolling s13 shell here in sa. Would u be willing to post? also what is the deal with the different clutch and brake masters? can't you use standard s13 ones? Cheers Luke