blackers10

spotted a white stagea cruising along Morayfield Road at Morayfield today, heading toward Bunnings, we were in the silver R33 4 door DEB189 plates you were looking at haha

for those that might find this thread, I just installed a otomoto eliminator kit, The biggest difference I noticed is the otomoto arms use a single piece bush for the hub end which is maybe a little soft from just squeezing it in my hand, where as the Driftworks one uses what the pictures look like a nolathane type 2 piece bush. other than that, they look pretty well identical, so far the Otomoto kit has been fine and adjusts up fine, for those that smash ripple strips and stuff on the circuit/drifting you might want to upgrade the bushing or go with the drift works one? but thats just a guess as I am not sure how much that would effect the toe arms? also you will more than likely NEED to remove the hubs to press/ heat up and beat out the original bush/ball joints from the hubs

hey mate do you have the under dash part of the AC? the evaporator is the part we are after as ours is leaking also what are the king springs you have? we have a stock R33 S1 4 door and want to lower it a bit can pick up no dramas

where do you live?? any boilermaker or engineering shop or supercheap or bunnings etc. should have a grinder... boilermaker would probably charge you the same price the cost of a grinder and 1 cutting disc will set you back

no thats not me..my wife has a silver over grey 4 door R33 and I have a silver cressida with 1j(broken at the moment) and a white festiva daily, we live at Narangba so you might see us around. R33 has black 18" varrstoens and a cannon exhaust, there is an identical one with different wheels that gets around here too last night at chermside we spotted a silver R33 coupe cruising along with a new shape WRX from around harrys to aspley maccas, sounded pretty mean?? maybe running no cat ?

cheers for the advice, its only auto and the wife doesn't rape it too much, but her fuel economy is terrible its stock with only the 7psi all the time solenoid grounded and a pod filter(DRIFT brand dry one not oiled like a K&N) and we have changed everything except the AFM so far(changed spark plugs today so see if that makes a difference) getting only 350km till it reads pretty close to E

hey guys, havn't been on here for a lil while just lurking around learning question I have for you tho. the Hicas light has come on in the missus R33 4 door when driving for the ol 10 mins around 80kmh etc there is a little bit of play in the inner tie rods from the look of it. so what are our options? do we need to replace the inner tie rods AND get a lock bar or is the play in the rack it self? or should we get the Hicas Eliminator kit that driftworks/cartel sells? which replaces EVERYTHING with new arms the other issue it is having now is when you start it up especially when cold it sort of struggles to bring the idle up, I cleaned out the IAC not long ago and its still doing it so not sure what the go is there any ideas?? cheers

The wife took the crappy ass wing off her R33, other than that its going well. the Hicas light has started coming on over 80kmh etc. also needs inner tie rods outter ball joint thingos and lock bar for the hicas or a driftworks eliminator kit so not sure which way we will go yet. not long ago got a mongoose alarm fitted by Chris Rogers and very happy with his work and the alarm:) The Cressida finally has some work happening! getting an Emanage Ultimate and a genuine head gasket for the 1jz and started pulling parts off the motor getting ready to remove it to see why it pumping oil. also got some R33 calipers and BA falcon rotors for the brake upgrade ready to go. I can't wait to drive a real car again instead of my hail damaged festiva which is doing well, just replaced a couple of bushes tonight Sorry to hear about being rear ended Boiracer that sucks!

my wifes parents went over to Japan for a wedding and we asked them to pick up some Domokun stuff turned out one of the only places you can get it is the NHK TV Character store which is SUPER expensive they brought us back all this stuff the cloth underneath opens up to like a table runner sort of length but is just a fabric, we are going to get it framed as its pretty cool

popped out to the test and tune tonight, saw a 4 door r34 and a 2 door r34 both run around the mid 14s from memory saw an old school capri lose it and JUST miss the wall at the pointy end of the track.. was like the 3rd run of the night.. apparently dropped some water but that was all thankfully and a stupid fast hayabusa drag bike(super stretched rear end etc) collected 2 timing markers at half track luckily nothing else happened to him couple of pop and crackle and crunch noises from a couple of cars but overall it was a good night not as busy as previous years for the good friday tnt but with a street shoot out event on tomorrow maybe half the fast cars held out till tomorrow

haha yeah she is pretty full on! I lost 20kg in a year and have been slowly putting muscle on.. still no abs in sight... and a pretty bad anterior pelvic tilt and curved upper back(too much computers as a kid and well now with an office job too) I do Brazilian Jiu Jitsu as my main fitness/sport, need to get in the gym more and throw more iron around so I can improve certain things I am lacking and yeah

Hey Melly, Do you know a Sam Burger at that gym she is a PT? I did a PT course with her late last year, she got stuck in and finished it all to start working there, I'm still bumbling along with my assessments as I have too many hobbies and already have a full time job haha. need to get focused

its actually my wifes car, she drives it to work from forest ridge to near the chooks matilda at narangba, but she does go through Morayfield on occasion on the weekend etc due to my Cressida dropping cylinder 3 and half dropping cylinder 5 I am rockin a bubble shape Festiva with MASS hail damage on the front

dark coloured R33 2 door cruising along Morayfield road at 7pm last night infront of the Morayfield shops no wing, looked like white wheels

glad to hear things are coming together for you Clint, Debs(the wife's) skyline is finally doing well finally!! all the clunks are gone next weekend is install front splits and run wiring (I hate that part) and wait for the sub box to turn up and throw it in and wire it up(easy part) just has to be easily removable for when we look after her friends kids and need the pram etc(her best friend had twin boys that are 1 year old and so she gets her cluck on with them haha What tuning options are there for auto skylines?? just planning on going the usual basic mods with this car (dump,front pipe,intercooler and bolt on turbo upgrade when this one kicks the bucket are all that needs doing now) just want to get it retuned afterwards to get the most out of it and obvious suspension enhancements cheers all will come meet you all some day soon hopefully, just always going to training instead of cruising haha sucks being addicted to too many hobbys